display Citroen C4 PICASSO RHD 2015 1.G Owner's Guide

135
Special cases
Application of of the parking brake is   confirmed   by   illumination   of   the  
b

rake   indicator   lamp   and   the   P
indicator
  lamp   in   the   control   lever,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   applied". The
  complete   release   of   the   parking  
b

rake   is   confirmed   by   the   brake  
i

ndicator   lamp   and   the   P   indicator  
l

amp   in   the   control   lever   going   off,  
a

ccompanied   by   the   display   of   the  
m

essage   "Parking   brake   released".
In
 
some
 
situations,   you   may   need   to   operate  
t

he
 
parking   brake   manually.
Immobilisation of the vehicle
with the engine running
To immobilise the vehicle with the engine r
unning,   briefly   pull   the   control   lever.
Parking the vehicle with the
brake released
In very cold conditions, it is recommended   that   the   parking   brake  
n

ot   be   applied   (risk   of   freezing).
To
  immobilise   your   vehicle,   engage   a  
g

ear   or   fit   a   chock   to   one   of   the   wheels.
Immobilisation of the vehicle with the
parking brake released
F
 
S

witch   off   the   engine.
 I

llumination   of   the   warning   lamps   in   the  
i

nstrument   panel   and   control   lever   confirm  
a

pplication   of   the   parking   brake.
F
 
S

witch   on   the   ignition   again,   without  
s

tarting   the   engine.
F
 
R

elease   the   parking   brake   manually   by  
p

ushing   the   control   lever   while   keeping  
y

our   foot   on   the   brake. F
 
S
witch   off   the   ignition.
4
Driving

137
Operating faults
The various alert situations are described in the table below.
I n   the   event   of   a   fault   with   the   electric   parking   brake   it   is   recommended   that   you   contact   a   CITROËN   dealer   or   a   qualified   workshop   without   delay.
Situations Consequences
Display
  of   the   message   "Parking brake fault "
  and   the  
fo

llowing
 w
arning
 lam
ps: -
 
A
utomatic   release   is   not   available.
-
 
I
f   you   attempt   an   automatic   release,   a   help   message   is   displayed   on   acceleration  
w

hen   the   parking   brake   is   applied,   prompting   you   to   use   manual   release.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
S
econdary   braking   does   not   have   full   power.
-
 
I
f   automatic   release   is   not   available,   a   help   message   is   displayed   on   acceleration  
w

hen   the   parking   brake   is   applied,   prompting   you   to   use   manual   release.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
A
utomatic   application   is   not   available:   use   the   control   lever.
-
 
T
he   electric   parking   brake   can   only   be   used   manually.
-
 
I
f   automatic   release   is   also   not   available,   a   help   message   is   displayed   on  
a

cceleration   when   the   parking   brake   is   applied,   prompting   you   to   use   manual  
r

elease.
Display
  of   the   message   "Parking brake fault "
  and   of   the  
fo

llowing
 w
arning
 lam
ps: -
 
I
f   manual   application   and   release   do   not   work,   the   control   lever   is   faulty.
-
 
T
he   automatic   functions   must   be   used   in   all   circumstances:   they   are  
a

utomatically   reactivated   in   the   event   of   failure   of   the   control   lever.
-
 
Y
ou   can   no   longer   immobilise   the   vehicle   with   the   engine   running.
4
Driving

138
SituationsConsequences
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: The
  Parking   Brake   is   faulty,   the   manual   and   automatic   functions   may   not   operate.
When stationary ,
  to   immobilise   your   vehicle:
-
 
P
ull   and   hold   the   control   lever   for   about   7   to   15   seconds,   until   the   warning   lamp  
c

omes   on   in   the   instrument   panel.
If
  this   procedure   does   not   work,   you   should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
Display
 
of
 
the
 
message
 
" Parking brake fault "
  and   of   the  
fo

llowing
 w

arning
 lam

ps: -
 
T
he   parking   brake   does   not   have   its   full   per formance   to   securely   hold   the   vehicle  
i

n   all   situations.
You
  should   make   your   vehicle   safe:
-
 
P
ark   on   a   level   sur face.
-
 
E
ngage   a   gear   with   a   manual   or   electronic   gearbox,   or   place   the   gear   selector   in  
p

osition P   with   an   automatic   gearbox.
-
 
I
f   possible,   fit   a   wheel   chock.
Call
  on   a   CITROËN   dealer   or   a   qualified   workshop.
The
  flashing   of   the   P   warning   lamps   on   starting   the   vehicle   indicates   that   the   parking  
b

rake   is   not   correctly   applied.
As
  soon   as   possible,   stop   the   vehicle   and   try   to   completely   release   the   parking   brake,  
u

sing   the   control   lever,   with   your   foot   on   the   brake   pedal.
Display
 
of
 
the
 
message
 
" Battery fault "
  and   the   following  
w

arning
 lam

p: -
 
T
he   state   of   charge   of   the   battery   is   very   low   and   requires   immobilisation   of   the  
v

ehicle   in   a   safe   place:   engage   a   gear   with   a   manual   gearbox   or   fit   a   chock   to  
o

ne   of   the   wheels.
-
 
O
nce   the   battery   is   completely   discharged,   the   controls   do   not   operate:   to  
r

elease   the   parking   brake,   call   on   a   CITROËN   dealer   or   a   qualified   workshop.
Driving

142
Displays in the instrument panel
N. neutral
R. R everse
M.

(
gear engaged)
Manual mode.
AUTO or A.
 A
utomated   mode. If the engine does not star t:
If N
  flashes   in   the   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message,   move   the   selector   lever   to  
p

osition A then to position N
.
Moving off
F Select position N.
F  P ress   the   brake   pedal   down   fully.
F
 
S
tart   the   engine.
N
  appears   in   the   instrument   panel  
sc

reen. F
 S elect   automated   mode   (position   A
) or
manual   mode   (position   M) or reverse
(position R ).
F
 
R
elease   the   parking   brake   by   pulling   the  
c

ontrol   lever,   if   automatic   operation   has  
b

een
 d
eactivated.
F
 
P
rogressively   take   your   foot   off   the   brake  
ped

al.
F
 
I
f   the   parking   brake   is   released,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and   the  
a

utomatic   mode   is   activated,   accelerate  
p

rogressively.A or AUTO
 

and   1, 1 or R
  is   displayed  
i

n   the   instrument   panel.
If the Foot on brake
warning
  lamp   comes   on  
t

he   instrument   panel,  
a

ccompanied   by   an   audible   signal   and  
a

  message   "Foot   on   brake",   press   the  
b

rake   pedal   firmly. If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed.
Driving

143
never select neutral N w hen d riving.
Automated mode
F Select position A.
AUTO or A
  and   the   gear   engaged   is  
d

isplayed   in   the   instrument   panel.
The
  gearbox   operates   in   auto-active   mode,  
w

ithout   any   action   on   the   part   of   the   driver.   It  
c

ontinuously   selects   the   most   suitable   gear   for:
-
 
o
ptimisation   of   fuel   consumption,
-
 
t
he   style   of   driving,
-
 
t
he   profile   of   the   road.
-
 
t
he   vehicle   load.
For
  optimum   acceleration,   for   example  
w

hen   overtaking   another   vehicle,   press  
t

he   accelerator   pedal   firmly   past   the  
p

oint   of   resistance.
Temporary control of gear
changing
F Select position M .
The   gears   engaged   are   displayed   in  
s

uccession   in   the   instrument   panel.
The
  gear   change   requests   are   only   acted   on   if  
t

he   engine   speed   permits.
It is not necessary to release the accelerator
during
  gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   to   allow   the  
v

ehicle   to   accelerate   in   the   correct   gear.
On
  sharp   acceleration,   the   gearbox   will   not  
c

hange   up   unless   the   driver   acts   on   the  
s

teering   mounted   paddles.
Manual mode
You can change mode at any time by moving the   selector   lever   from   A to M or the other way
round.
ne

ver select neutral N while the vehicle is
moving.
You
 
can
 
temporarily
 
take
 
over
 
control
 
of
 
g

ear
 
changing
 
using
 
the
 
"+"
 

and
 
"-"
 

steering
 m
ounted
 
paddles.
 
If
 
the
 
engine
 
speed
 
allows,
 t
he
 
instruction
 
to
 
change
 
gear
 
is
 
acted
 
on.
This function allows you to anticipate certain
situations
 
such
 
as
 
overtaking
 
a
 
vehicle
 
or
 
the
 
a

pproach
 
to
 
a
 
corner.
After
 
a
 
few
 
moments
 
without
 
any
 
action
 
on
 
t

he
 
control
 
paddles,
 
the
 
gearbox
 
resumes
 
a

utomatic
 
control
 
of
 
the
 
gears.
4
driving

146
+. Control  paddle   for   changing   up,   to   the   right  o
f   the   steering   wheel.
F

P
ull the " +"
  paddle   towards   you   to   change  
u

p.
-.
 C

ontrol   paddle   for   changing   down,   to   the  
l

eft   of   the   steering   wheel.
F

P
ull the " -"
  paddle   towards   you   to   change  
d

own.
Steering mounted control paddles
The steering mounted control paddles cannot   be   used   to   select   neutral   or   to  
s

elect   or   come   out   of   reverse. When
  you   move   the   gear   selector,   the   symbol  
c

orresponding   to   its   position   is   displayed   in   the  
in

strument
 pan
el.
P.
 Pa
rk.
R.
 R
everse.
N.
 N
eutral.
D.
 D
rive   (automatic   for ward   drive).
1 to 6.  
G
ears   engaged   in   manual   operation.
-.
 I
nvalid   value   in   manual   operation.
Displays in the instrument panelMoving off
F With
  your   foot   on   the   brake   pedal,   select  p
osition P or N .
F
 
S
tart   the   engine.
If P
  is   displayed   in   the   instrument   panel,  
a

lthough   the   gear   selector   is   in   another  
p

osition,   place   the   gear   selector   in  
p

osition P   to   be   able   to   start   the   engine.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
S
elect   automated   mode   (position   D),
manual
  mode   (position   M) or reverse
(position R ).
If
  you   do   not   press   the  
b

rake   pedal   to   come   out   of  
p

osition P,
  this   warning   lamp  
O
ther wise,   there   is   an   audible   signal  
a

ccompanied   by   a   message.
or
  symbol   appears   in   the   instrument  
p

anel,   accompanied   by   the   message  
"

Place   automatic   gearbox   in   position P",
flashing
  of   P   in   the   instrument   panel  
a

nd   an   audible   signal.
Driving

147
F Check  that   the   symbol   displayed   in   the  i
nstrument   panel   agrees   with   the   position  
enga

ged.
F
 
P
rogressively   release   the   brake   pedal.
F
 
I
f   the   parking   brake   is   release,   the   vehicle  
m

oves   off.
 I

f   the   parking   brake   is   applied   and  
a

utomatic
 ope
ration
 i
s
 a
ctivated,
 a
ccelerate
 a

way.
Never
  press   the   accelerator   and   brake  
p

edals   at   the   same   time.   Braking   and  
a

cceleration   should   be   done   only   with  
t

he   right   foot.   Pressing   both   pedals  
t

ogether   risks   damaging   the   gearbox.
If
  the   brake   does   not   release  
a

utomatically,   check   that   the   front   doors  
a

re   correctly   closed. Never
  leave   children   unsupervised   in  
t

he   vehicle   when   the   engine   is   running.
When
  carrying   out   a   maintenance  
o

peration   with   the   engine   running,  
a
pply  
t

he   parking   brake   and   select   position   P.
ne

ver select position P or R unless the
vehicle
  is   a   a   complete   stop   with   the  
br

ake
 a
pplied.
When
  you   want   to   engage   reverse,  
t

o   avoid   jolts,   do   not   accelerate  
i

mmediately   after   engaging   R.
Changing
 in

to
 p
osition
 R
is
accompanied
  by   an   audible   signal.never select position N   when   driving.  
I

f position N is   engaged   in   error   when  
m

oving,   allow   the   engine   to   idle,   then  
e

ngage   position   D   to   accelerate.
When
  the   engine   is   running   at   idle,  
b

rakes   releases,   if   position   R, D or M is
selected,
  the   vehicle   will   move   even   if  
t

he   accelerator   is   not   pressed.
4
Driving

148
Invalid value in manual operationThis   symbol   is   displayed   if   a   gear   is  
n

ot   engaged   correctly   (gear   selector  
b

etween   two   positions).
You
 
can
 
temporarily
 
take
 
control
 
of
 
gear
 
c

hanges
 
using
 
the
 
 "
+"
 
and
 
"
- "
 
steering
 
m

ounted
 
control
 
paddles.
 
If
 
the
 
engine
 
speed
 
a

llows,
 
the
 
instruction
 
to
 
change
 
gear
 
is
 
acted
 
o

n.
This function allows you to anticipate certain
situations
 
s

uch
 
a

s
 
ov

ertaking
 
a

nother
 
v

ehicle
 
o

r
 a
pproaching
 
a
 
bend.
After
 
a
 
few
 
moments
 
with
 
no
 
action
 
on
 
the
 
c

ontrol
 
paddles,
 
the
 
gearbox
 
manages
 
the
 
g

ears
 
automatically
 
again.
Temporary manual control of the
gears
Manual mode
D and the gear engaged are displayed in the in strument pan el.
The
  gearbox   operates   in   auto-active  
m

ode,   without   any   action   from   the   driver.   It  
c

ontinuously   selects   the   most   appropriate   gear  
a

ccording   to   the   following   conditions:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-
 
r
elief   of   the   road,
-
 
v
ehicle   load.
Automated mode
F Select position D .
For
 
maximum   acceleration,   without   touching  
t

he
 
gear
 
selector,   press   the   accelerator   fully  
d

own
 
(kick   down).   The   gearbox   changes   down  
a

utomatically   and   maintains   the   gear   selected  
u

ntil
 
the
 
maximum   engine   speed   is   reached.
When
 
braking,   the   gearbox   changes   down  
a

utomatically   for   more   effective   engine   braking.
When
 
you   take   your   foot   of   the   accelerator  
p

edal
 
suddenly,   the   gearbox   does   not   change  
u

p,
 
so
 
as
 
to   improve   safety. F
Sel ect position M.
F

U
se the "+"
  and   "- "
  steering   mounted  
c

ontrol   paddles   to   change   gear.
The
  gears   engaged   are   displayed   successively  
i

n   the   instrument   panel.
When
  stationary   or   at   very   low   speed,   the  
g

earbox   automatically   engages   1st
 g
e a r.
In
  manual   mode,   it   is   not   necessary   to   release  
t

he   accelerator   pedal   when   changing   gear.
The
  change   from   one   gear   to   another   is   only  
e

ffected   if   the   conditions   of   vehicle   speed   and  
e

ngine   speed   allow;   other wise   the   automatic  
l

aws   of   operation   are   imposed   temporarily.
If
  the   engine   speed   is   too   high   or   too   low,  
t

he   display   of   the   gear   selected   flashes   for   a  
f

ew   seconds,   then   the   new   gear   engaged   is  
d

isplayed.It
  is   possible   to   change   mode   at   any  
t

ime,   by   moving   the   gear   selector  
f

rom D to M   or   the   other   way   round.
Driving

153
The system is reactivated automatically every   time   the   engine   is   started   by  
t

he driver.
Reactivation
Press this button again.
Operating fault
Have it checked by a CITROËN dealer or a q ualified w orkshop.
In
  the   event   of   a   fault   in   STOP   mode,   the  
v

ehicle   may   stall.
All of the instrument panel warning lamps come on.Depending on version, an alert message may also   be   displayed,   asking   you   to   place   the   gear  
s

elector lever on position N   and   put   your   foot  
o

n   the   brake   pedal.
It
  is   then   necessary   to   switch   off   the   ignition  
a

nd   start   the   engine   again   using   the   "START/
STOP"
  button.In
 
t
he  
e
vent  
o
f  
a
 
f
ault  
w
ith  
t
he  
s
ystem,  
t

he   symbol   for   the   button   changes  
t

o   alert   mode   and   the   warning   lamp  
f

lashes   for   a   few   moments   then  
c

omes   on   continuously.
The
 
system
 
is
 
active
 
again;
 
this
 
is
 
c

onfirmed
 
by
 
the
 
indicator
 
lamp
 
in
 
the
 
b

utton
 
going
 
off
 
and
 
illumination
 
of
 
t

his
 
symbol.
The  Stop   &   Start   system   makes   use   of  
a

dvanced   technology.   For   any   work   on  
t

he   system   go   to   a   qualified   workshop  
w

ith   the   skills   and   equipment   required,  
w

hich   a   CITROËN   dealer   is   able   to  
pro

vide.
Before
  doing   anything   under   the  
b

onnet,   deactivate   the   Stop   &   Start  
s

ystem   to   avoid   any   risk   of   injury  
r

esulting   from   automatic   operation   of  
S

TART   mode.
Maintenance
This system requires a 12 V battery with a special   specification   and   technology   (reference  
n

umbers   available   from   CITROËN   dealers).
Fitting
  a   battery   not   listed   by   CITROËN  
i

ntroduces   the   risk   of   malfunction   of   the  
s

ystem.
For
  charging,   use   a   12   V   charger   and   do   not  
r

everse   the   polarity.
4
Driving

154
Display of inter-vehicle time
Using a radar located at the front of the vehicle, this   system   helps   the   driver   maintain   a   safe  
d

istance   between   their   vehicle   and   the   one   in  
f

ront,   by   displaying   the   current   inter-vehicle  
t

ime   in   the   instrument   panel.
It
  is   the   time   interval,   expressed   in   seconds,  
t

hat   separates   two   vehicles   in   line.   The  
r

ecommended   safe   value   is   about   2   seconds:  
r

efer   to   the   legislation   or   highway   code   in   force  
i

n   your   country.Conditions for display
The measurement is displayed for information   only:   the   system   takes   no a

ction   on   the   vehicle.
This
  system   does   not   in   any
 c

ircumstances   replace   the   need   for
 v

igilance   on   the   part   of   the   driver   who
 m

ust   remain   in   control   of   the   vehicle   at
 a

ll   times.
The
  system   is   not   designed   for   urban
 u

se
 
nor
 
for
 
more
 
dynamic
 
driving
 
(bends,
 a

cceleration,   harsh   braking…)   but   rather
 w

hen   driving   at   a   steady   speed.
The
  system   is   active   in   a   speed   range  
b

etween   42   and   93   mph   (70   and  
1

50 km/h).
Stationary   vehicles   and   certain   other  
r

oad   users   (such   as   bicycles   for  
e

xample)   are   not   detected.
The   system   displays   inter-vehicle   time  
v

alues   of   between   3   seconds   and   0.5   of  
a

  second.
Below   0.5   of   a   second,   the   value  
d

isplayed   is   maintained   at   this   level,  
e

ven   if   the   true   inter-vehicle   time   is   less.
The   active   cruise   control   must   not  
b

e   selected   (the   active   cruise   control  
i

nformation   is   displayed   instead   of   that  
f

or   the   inter-vehicle   time).
The   system   is   only   available   with   the  
"

DRIVING"   display   mode   of   the   type   2  
in

strument
 pan
el.
Driving