ESP Citroen C5 2000 (DC/DE) / 1.G Owner's Guide

Downloaded from www.Manualslib.com manuals search engine 191
CLUTCH
GEARBOX
DRIVESHAFTS
ML/5 GEARBOX CONTROLS
Engines : XFX – RHZ – 4HX
Tools.
[1]Tool for positioning the gearbox control lever8605-T Tool kit 9040-T
Adjustments.
Cables should be adjusted each time the gearbox, gear controls or power unit are removed.
Adjustment principles :
- Lock the gear lever in neutral position, using tool [1].
- Position the gearbox in neutral.
- Anchor the ball-joints on the gearbox levers.
- Lock the cable lengths with the ball-joint locking keys.
Inside the vehicle.
- Remove the central console (See corresponding operation).
- Remove the plastic blank at(a).
- Insert tool [1]fully and rotate a quarter turn to lock the gear control lever.
- At neutral.
B2CP3E7C

Downloaded from www.Manualslib.com manuals search engine 197
RECOMMENDATIONS - PRECAUTIONS (AL 4 AUTOMATIC GEARBOX)
Engines : 6FZ - RFN - RHZ
Procedure to be followed prior to carrying out repairs on AL4 autoactive gearbox
CLUTCH
GEARBOX
DRIVESHAFTS
If a gearbox malfunction occurs, there are two possible configurations
depending on the seriousness of the fault :
- Gearbox in back-up mode with a replacement programme of
(the fault values are taken in substitution).
- Gearbox in back-up mode with an emergency programme
(3rd hydraulic).
WARNING : In the emergency programme, an impact is felt when
changing P/R, N/RandN/D.
Réception client.
Discuss with the customer, to find out all the malfunction symptoms..
Oil quality – Oil level.
If the gearbox has suffered a serious fault resulting in a malfunction or
the destruction of a clutch, the oil will overheat and become
contaminated with impurities : the oil is said to be «burnt».
This is characterised by a black colour and the presence of an
unpleasant smell.
ESSENTIAL : The gearbox must be replaced.Oil quality.
See corresponding operation.
An excessive oil level can result in the following consequences :
- Excessive heating of the oil.
- Oil leaks.
An insufficent level causes the destruction of the gearbox.
Top up the level of oil in the gearbox (if necessary).
Check using a diagnostic tool.
Read the fault codes (engine and gearbox).
Absence de codes défauts.
Carry out parameter measures, actuator tests and a road test.
Presence of fault codes.
Carry out the necessary repairs.
Delete the fault codes.
Carry out a road test to check the repair and, if need be, modify the
gearbox ECU parameters (this is essential after an initialisation of the ECU).

Downloaded from www.Manualslib.com manuals search engine 233
BRAKES
BLEEDING AND FILLING THE BRAKING SYSTEM
Bleeding, filling (continued).
Bleeding the secondary circuit.
NOTE : The bleeding apparatus is connected on the brake reservoir.
- Use LEXIAorPROXIAdiagnostic tools.
Select the menu corresponding to the vehicle :
- ABS menu.
- ESP menu.
- Follow the instructions on the diagnostic tool.
- At the end of the bleeding process, check and top up, if necessary, the brake fluid level.
- Check that the brake pedal travel has not been lengthened, otherwise repeat the bleeding procedure.
- Remove the tools.