Height Citroen C5 2000 (DC/DE) / 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2000, Model line: C5, Model: Citroen C5 2000 (DC/DE) / 1.GPages: 259, PDF Size: 2.29 MB
Page 9 of 259
Downloaded from www.Manualslib.com manuals search engine GENERAL
6
GENERAL SPECIFICATION : DIMENSIONS
Exterior dimensions (mm)
Dimensions and interior volumes (mm)
VehiclesAll types
(except 3.0i V6 and 2.2 HDi)2.2 HDi 3.0i V6
Wheel base A 2750
Length (overall) B 4618
Rear track on the ground C 1509 1495 1493
Front track on the ground D 1544 1530 1528
Width (overall) E 1770
Height (overall) (
*) F 1476
Front overhang G 971
Rear overhang H 897
(
*) = Vehicle in running order (vehicle empty, levels topped up).
Elbow width, front1538
Elbow width, rear1520
Height of boot below parcel shelf554
Minimum floor width1170
Boot depth at floor level985
Volume of boot below parcel shelf (dm
3)456
Page 58 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
55
CYLINDER HEAD
Engines : RHZ - RHY
Cylinder head gasket identification
Number
of notches at A Thickness
(mm) Engine
platePiston
stand-proud
(mm)
0.47 to 0.605 1.30 ± 0.06 1
0.605 to 0.655 1.35 ± 0.06 2
0.655 to 0.705 1.40 ± 0.06 3
0.705 to 0.755 1.45 ± 0.06 4
0.755 to 0.83 1.50 ± 0.06 5
RHZ
RHY
B1DP15AD
Cylinder head.
- New cylinder head height = 133 mm.
- Maximum permitted deformation = 0.03 mm.
Cylinder head gasket.
Multilayer cylinder head gasket.
Select seal thickness as a function of the piston stand-proud.
Hydraulic followers.
The hydraulic followers have automatic clearance adjustment.
Page 60 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
57
CYLINDER HEAD
Engine : 4HX
Cylinder head gasket identification
Number
of notches
At B At A Thickness
(mm) Engine
platePiston
stand-proud (mm)
0.55 to 0.60 1.25 ± 0.04 1
0.61 to 0.65 1.30 ± 0.04
12
0.66 to 0.70 1.35 ± 0.04 3
0.71 to 0.75 1.40 ± 0.04 4
4HX
Cylinder head.
- New cylinder head height = 133 mm.
- Maximum permitted deformation = 0,03 mm.
Cylinder head gasket.
Multilayer cylinder head gasket.
Select seal thickness as a function of the piston stand-proud.
Hydraulic followers.
The hydraulic followers have automatic clearance adjustment.
B1DP18XD
Page 112 of 259
Downloaded from www.Manualslib.com manuals search engine ENGINE
109
To be read together with the Petrol and Diesel correspondence tables
OIL FILTERS
PURFLUXLS 304
LS 880
SpecificationsDia. (mm)Height (mm)
LS 880 LS 3047689
6FZ RFN RLZ XFX RHY RHZ 4HX
XX X X XX
X
Page 215 of 259
Downloaded from www.Manualslib.com manuals search engine 212
AXLES
SUSPENSION
STEERING
L1
The dimension«L1» for checking front height is between the level of
the front subframe «b» and the wheel axis «a».
This method eliminates all the variations in measurement due to :
Different wheel fiittings.
Vehicle loading.
Wear or incorrect inflation of tyres.
(Measuring from the wheel axis : tool 8006-T)
AXLE GEOMETRY
General adjustment conditions
Rear height Front height
NOTE : After each movement of the vehicle body, and before each mea-
surement :
- Move the vehicle slightly forwards and backwards, by turning the road
wheel by hand.- Check the tyre pressures.
- Release the handbrake.
- Place the manual height control in the «NORMAL» position.
- Engine running.
L2
The dimension«L2»for checking rear height is between the measuring
zone «b» and the wheel axis «a».
H1 = R1 - L1
H1 = Front height(± 6 mm).
R1 =Wheel radius(mm).
L1 = Theoretical dimension between the level of the front subframe and
the wheel axis.H2 = R2 + L2
H2 = Rear height (± 6 mm).
R2 = Wheel radius(mm).
L2 = Theoretical dimension between the measuring zone on the cross-
member support and the wheel axis.
Page 216 of 259
Downloaded from www.Manualslib.com manuals search engine 213
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY
Measuring front height
The measurement of the front dimension «H1» is between ground level
and the measuring zone on the front subframe
(to the rear of the front yokes fixing the suspension arm).
L1 (mm)
Theoretical dimension between the level of the front subframe and
the wheel axis.
140L1 (mm)
Theoretical dimension between the measuring zone on the cross-
member support and the wheel axis.
140 Measuring rear height
B3BP166DB3BP168D
Page 220 of 259
Downloaded from www.Manualslib.com manuals search engine 217
AXLES
SUSPENSION
STEERING
SUSPENSION
Front suspension
Tightening torques m.daN.
(10) Arm front fixing13 ± 1.3
11) Arm rear fixing8 ± 0.8
(12) Anti-roll bar bearing fixing on subframe4.2 ± 0.6
Hydractive 3+ hydraulic suspension (Power steering)
Suspension piston diameter = 35 mm.
Anti-roll bar diameter= 23.5 mm.
Anti-roll bar colour reference= Yellow.
Suspension leg.
Bump stop, height "A" = 97 mm.
B3CP05WDB3BP167D
Page 222 of 259
Downloaded from www.Manualslib.com manuals search engine 219
AXLES
SUSPENSION
STEERING
SUSPENSION
Height control
Tightening torques m.daN.
(20)Collars0.6
B3CP06TD
Page 237 of 259
Downloaded from www.Manualslib.com manuals search engine B4CP01FP
234
HYDRAULIC
SYSTEM
HYDRAULIC SPECIFICATIONS
Location of components
(A)High pressure hydraulic circuit.
(B)Low pressure hydraulic circuit.
(C)Electric circuit.
(21)Built-in Hydro-electronic Interface (BHI).
(22) Front slimline sphere.
(23) Front suspension cylinder.
(24)Rear slimline sphere.
(25)Rear suspension cylinder.
(26)Front hydractive 3+ regulator accumulator.
(27)Front hydractive 3+ regulator.
(28)Rear hydractive 3+ regulator accumulator.
(29)Rear hydractive 3+ regulator
(30) Front height sensor.
(31)Rear height sensor.
(32) LDS fluid reservoir .
(33) Suspension switch.