radiator Citroen C5 2000 (DC/DE) / 1.G Owner's Manual

Downloaded from www.Manualslib.com manuals search engine ENGINE
101
6FZ RFN RLZ RHY RHZ
8.8 - 9.3 (*) 8.8
21dm
2
1.4 bar
89°C 83°C
1x250W (1-speed) 1x350 W (2-speed)
91°C 97°C
105°C
11 8 ° C
6 mn (Max.)
(*) = With automatic gearbox
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ – RFN - RLZ - RHY - RHZVehicle without air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
Warning
Post-cooling1.8i 16V
2.0i 16V
3.0i 16V 2.0 HDi

Downloaded from www.Manualslib.com manuals search engine 6FZ RFN RLZ XFX RHY RHZ 4HX
8.8 - 9.3 (*) 8.8 14 10.7 (*)
27 dm
221 dm2
1.4 bar
89°C 78°C 89°C
1x500 W 3-speed
1 = 97°C 10 Bars
2 = 101°C 17 Bars
3 = 105°C 22 Bars
11 5 ° C 11 2 ° C 11 5 ° C
11 8 ° C
6 minutes (Max.)
ENGINE
102
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN - RLZ - XFX - RHY - RHZ - 4HXVehicle with air conditioning
Engine plate
Capacity
Radiator surface
Pressurisation
Opening of thermostatic
regulator
Cooling fan
1st speed
2nd speed
3rd speed
Aircon cut-out
Warning
Post-cooling1.8i 16V
2.0i 16V 2.0 HPi
3.0i 16V 2.0 HDi 2.2 HDi
(*) = With automatic gearbox

Downloaded from www.Manualslib.com manuals search engine ENGINE
103
COOLING SYSTEM SPECIFICATIONS
Engines : 6FZ - RFN
(1) Venting chamber.
(2) Water pump.
(3)Heater matrix.
(4)Bleed screw, heater matrix.
(5) Drain screw, cylinder cover.
(6)Water outlet housing.
(7)Bleed screw, water outlet housing.
(8)Drain screw, cooling radiator.
(9) Plug, cooling radiator.
(10)Cooling radiator.
Thermostat tightening : 1.7 ± 0.2 m.daN
B1GP08VP

Downloaded from www.Manualslib.com manuals search engine ENGINE
104
COOLING SYSTEM SPECIFICATIONS
Engine : RLZ
(1) Venting chamber
(2) Water pump
(3)Heater matrix
(4).Bleed screw, heater matrix
(5)Drain screw, cylinder block
(6) Coolant outlet housing
(7) Bleed screw, coolant outlet housing
(8) Bleed screw, top hose.
(9) Cooling radiator.
(10) Drain screw, cooling radiator
(11)Drain screw, cooling radiator.
Thermostat tightening : 1.7 ± 0.2m.daN
B1GP08JP

Downloaded from www.Manualslib.com manuals search engine ENGINE
105
COOLING SYSTEM SPECIFICATIONS
Engine : XFX
(1)Heater matrix
(2)Venting chamber
(3) Thermostat.
(4) Coolant outlet housing
(5) Coolant inlet housing
(6) Engine cooling radiator
(7) Venting chamber
(8) Bleed screw
(9) Water / oil exchanger
(10) Thermostat
(11) Thermostat(Coolant outlet housing)
(12) Thermal switch
(10). (11)and (12): Tightening 1.7 ± 0.4 m.daN
B1GP041P

Downloaded from www.Manualslib.com manuals search engine ENGINE
106
COOLING SYSTEM SPECIFICATIONS
Engines : RHY-RHZ
(1) Venting chamber
(2) Heater matrix
(3) Coolant inlet housing
(4)Exhaust gas / coolant heat exchanger
(5)Bleed screw
(6)Cylinder block drain plug
(7) Coolant outlet housing
(8) Additional heating (Option or according to version)
(9) Radiator
(10) Coolant / oil heat exchanger
B1GP08EP

Downloaded from www.Manualslib.com manuals search engine ENGINE
107
COOLING SYSTEM SPECIFICATIONS
Engine : 4HX
(10)Heater matrix
(2) Coolant inlet housing.
(3) Exhaust gas / coolant heat exchanger
(4) Bleed screw
(5)Coolant outlet housing.
(6)Additional heating (Option or according to version)
(7) Radiator
(8)Air / coolant heat exchanger
(9) Coolant / oil heat exchanger
(10) Venting chamber
B1GP08HP

Downloaded from www.Manualslib.com manuals search engine 138
INJECTION
B1BP28ECC5FPOBLC
CHECKS : TURBO PRESSURE
Engine : 4HX
Preparation of tools : in position on the vehicle (continued).
Screw the tool [3] on the take-off of the turbo air radiator at «c».
Place the pressure gauge on the cup holder at «d».
Connect the extension [2]on the hose «b»and tool [5].
ESSENTIAL : Observe the following checking requirements.
- Start the engine.
- Engage first gear and start the vehicle.
- Engage the gears up to third gear.
- Decelerate to1500 rpm.
Accelerate gradually : the pressures should be the following :
1,1 ± 0,05 b at 2000 rpm
1,2 ± 0,05 b at 3000 rpm.
Return the vehicle to normal.
Remove the tools [1],[2], [3], [4]and [5].
Reposition the pressure sensor (3).
Couple the tube(2).
Refit and tighten the screw (1).