wheel size Citroen C5 2008.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008.5, Model line: C5, Model: Citroen C5 2008.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.9 MB
Page 46 of 306
63
3
C O M F O R T
As a safety precaution, it is impera-
tive that these operations are carried
out while the vehicle is stationary.
STEERING WHEEL ADJUSTMENT
The height and depth of the steer-
ing wheel can be adjusted to adapt
the driving position to the size of the
driver.
Adjustment
First, adjust the driver's seat to
the most suitable position.
When stationary, pull the con-
trol A to unlock the steering
wheel.
Adjust the height and depth.
Push the control to lock the
steering wheel.
A f t e r l o c k i n g , i f y o u p r e s s fi r m l y o n
the steering wheel, a slight click may
be heard.
Page 167 of 306
167
11
P R A C T I C A L I N F O R M A T I O N
Wheel for temporary use
Y o u r v e h i c l e m a y b e fi t t e d w i t h a
spare wheel which is different to
t h o s e o n t h e v e h i c l e . W h e n fi t t i n g
the spare wheel, it is normal to no-
tice that the wheel bolt washers do
not come into contact with the wheel
rim. The spare wheel is secured by
the conical tapering of the wheel
bolt’s shaft.
W h e n r e fi t t i n g t h e o r i g i n a l w h e e l ,
ensure that the wheel bolt contact
surfaces are clean and in good con-
dition. Fitting a wheel
Fit the wheel on the hub, using
the centring guide. Make sure
that the contact surface between
the hub and the wheel is clean.
Screw in the bolts but do not fully
tighten them.
Lower the jack and remove it.
Tighten the wheel bolts, using
the wheelbrace.
R e fi t t h e p r o t e c t o r s o n t h e b o l t s .
Return the ground clearance to
the normal position.
Ensure the tyre pressure is cor-
rect and have the balancing
checked.
Deflation detection
These wheels have tyre pressure
sensors. It is essential to have re-
pairs carried out by a CITROËN
dealer.
Anti-theft bolts
Each wheel is equipped with one
anti-theft bolt.
To remove it:
Remove the protector using tool 3 .
Use the anti-theft socket with the
wheelbrace. I f y o u r v e h i c l e i s fi t t e d w i t h
a spare wheel of a different
size to those on the vehi-
c l e , y o u m u s t n o t e x c e e d 5 0 m p h
(80 km/h) whilst using the spare
wheel.
T h e w h e e l b o l t s a r e s p e c i fi c t o t h e
type of wheel.
If the type of wheel is changed,
check with your CITROËN dealer
that the wheel bolts are compatible
with the new wheels.
Take care to note down the code
number engraved on the head of
the anti-theft bolt socket. This will
enable you to obtain a replace-
ment anti-theft bolt socket from a
CITROËN dealer .
Page 168 of 306
167
11
P R A C T I C A L I N F O R M A T I O N
Wheel for temporary use
Y o u r v e h i c l e m a y b e fi t t e d w i t h a
spare wheel which is different to
t h o s e o n t h e v e h i c l e . W h e n fi t t i n g
the spare wheel, it is normal to no-
tice that the wheel bolt washers do
not come into contact with the wheel
rim. The spare wheel is secured by
the conical tapering of the wheel
bolt’s shaft.
W h e n r e fi t t i n g t h e o r i g i n a l w h e e l ,
ensure that the wheel bolt contact
surfaces are clean and in good con-
dition. Fitting a wheel
Fit the wheel on the hub, using
the centring guide. Make sure
that the contact surface between
the hub and the wheel is clean.
Screw in the bolts but do not fully
tighten them.
Lower the jack and remove it.
Tighten the wheel bolts, using
the wheelbrace.
R e fi t t h e p r o t e c t o r s o n t h e b o l t s .
Return the ground clearance to
the normal position.
Ensure the tyre pressure is cor-
rect and have the balancing
checked.
Deflation detection
These wheels have tyre pressure
sensors. It is essential to have re-
pairs carried out by a CITROËN
dealer.
Anti-theft bolts
Each wheel is equipped with one
anti-theft bolt.
To remove it:
Remove the protector using tool 3 .
Use the anti-theft socket with the
wheelbrace. I f y o u r v e h i c l e i s fi t t e d w i t h
a spare wheel of a different
size to those on the vehi-
c l e , y o u m u s t n o t e x c e e d 5 0 m p h
(80 km/h) whilst using the spare
wheel.
T h e w h e e l b o l t s a r e s p e c i fi c t o t h e
type of wheel.
If the type of wheel is changed,
check with your CITROËN dealer
that the wheel bolts are compatible
with the new wheels.
Take care to note down the code
number engraved on the head of
the anti-theft bolt socket. This will
enable you to obtain a replace-
ment anti-theft bolt socket from a
CITROËN dealer .