bulb Citroen C5 2012 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2012, Model line: C5, Model: Citroen C5 2012 (RD/TD) / 2.GPages: 316, PDF Size: 9.75 MB
Page 5 of 316
CONTENTS
Direction indicators 114
Hazard warning lamps 114
Horn 114
Emergency or assistance call 114
Tyre under-infl ation detection 115
Braking assistance systems 117
Trajectory control systems 118
Seat belts 119
Airbags 122
VIII-SAFETY 11 4 Î125
Parking brake 126
Electric parking brake 127
Hill start assist 134
Manual gearbox 135
Gear shift indicator 136
6-speed electronic
gearbox system 137
Stop & Start 141
Automatic gearbox 144
Fixed centred controls
steering wheel 148
Speed limiter 150
Cruise control 152
Lane departure warning system 154
Parking space sensor 155
Parking sensors 157
Reversing camera (Tourer) 158
"Hydractive III +" electronic
suspension 159
IX - DRIVING 126 Î160
Bonnet 162
Running out of fuel (Diesel) 164
Petrol engines 165
Diesel engines 167
Checking levels 170
Checks 172
X -CHECKS 161 Î 173
Temporary puncture repair kit 174
Changing a wheel 177
Changing a bulb 181
Changing a fuse 191
Battery 196
Energy economy mode 198
Towing the vehicle 199
Towing a trailer 200
Roof bars 201
Very cold protection 202
Cold climate screen 203
Accessories 205
XI - PRACTICALINFORMATION 174 Î 206
Petrol engines 207
Petrol weights 208
Diesel engines 210
Diesel weights 212
Diesel weights -
commercial versions (Tourer) 216
Dimensions 217
Identifi cation markings 221
XII - TECHNICALDATAA 207 Î222
Emergency or assistance 223
eMyWay 225
Audio system 279
XIII - AUDIO andTELEMATICS 223 Î298
VISUALSEARCH 299 Î 304
ALPHABETICAL INDEX 305 Î 309
Page 91 of 316
V
89
VISIBILITY
Linked with the automatic
"Guide-me-home" lighting
The link with the automatic illumi-
nation of headlamps provides the
"guide-me-home" lighting with the
following additional options:
- selection of the duration of lighting
for 15, 30 or 60 seconds in the ve-
hicle parameters on the instrument
panel screen confi guration menu,
- automatic activation of "guide-
me-home" lighting when auto-
matic illumination of headlamps
is in operation.
Operating fault
In the event of a fault with the sun-
shine sensor, the lighting comes
on and a message appears in the
instrument panel screen, accompa-
nied by an audible signal.
Contact a CITROËN dealer or a quali-
fi ed workshop.
In fog or snow, the sunshine sen-
sor may detect suffi cient light.
Therefore, the lighting will not
come on automatically.
Do not cover the sunshine sen-
sor, linked with the rain sensor and
located in the centre of the wind-
screen behind the rear view mirror;
the associated functions would no
longer operate.
MANUAL HEADLAMP ADJUSTMENT
To avoid dazzling other road users,
the height of the halogen bulb head-
lamps must be adjusted according
to the load in the vehicle.
0.
1 or 2 people in the front seats.
-. 3 people.
1.
5 people.
-. Intermediate setting.
2.
5 people + maximum authorised
loads.
-. Intermediate setting.
3.
Driver + maximum authorised
loads.
Initial setting is position "0".
AUTOMATIC ADJUSTMENT OFDIRECTIONAL HEADLAMPS
Do not touch the xenon bulbs.
Contact a CITROËN dealer or a
qualifi ed workshop. If a fault occurs, this
warning lamp comes
on in the instrument
panel, accompanied by
an audible signal and a
message in the instru-
ment panel screen.
The system then places your head-
lamps in the lowest position. To avoid causing a nuisance to other
road users, this system corrects
the height of the xenon headlamp
beams automatically and when sta-
tionary, depending on the load in the
vehicle.
Page 183 of 316
XI
!
181
PRACTICAL INFORMATION
CHANGING A BULB
Front lamps
Model with Xenon headlamps (D1S)
1.
Dual-function Xenon
headlamps (dipped/main):
D1S
2.
Cornering lighting:
HP19
3.
Daytime running lamps /
sidelamps (LEDs)
For the maintenance of the front lamps
and changing HP19 and D1S bulbs
and LED lamps, contact a CITROËN
dealer or a qualifi ed workshop.
Risk of electrocution
Xenon bulbs must be replaced by
a CITROËN dealer or a qualifi ed
workshop.
You are advised to change both
D1S bulbs at the same time, if one
of them has failed. The headlamps are fi tted with
polycarbonate glass with a
protective coating:
)
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
)
use a sponge and soapy water,
)
when using a high pressure
washer on persistent marks, do
not keep the lance directed to-
wards the lamps or their edges
for too long, so as not to dam-
age their protective coating and
seals,
)
do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has been
switched off for a few minutes (risk
of serious burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb with a
new bulb with the same type and
specifi cation.
Page 184 of 316
XI
182
PRACTICAL INFORMATION
Main beam headlamps
)
Remove the protective cap A
.
)
Disengage the retaining spring.
)
Remove the bulb and replace it,
paying attention to the direction
of fi tting.
)
Refi t the retaining spring.
)
Refi t the protective cap A
.
Model with halogen headlamps
1.
Main beams:
H1
2.
Dipped beams:
H7
3.
Directional lighting:
H7
4.
Daytime running lamps /
sidelamps (LEDs)
For the maintenance of the front lamps
and changing LED lamps, contact a
CITROËN dealer or a qualifi ed work-
shop.
Page 185 of 316
XI
183
PRACTICAL INFORMATION
Dipped beam
headlamps
)
Remove the protective cap B
.
)
Disconnect the connector by
pressing it between the thumb
and index fi nger.
)
Free the bulb from its two metal
clamps.
)
Take out the bulb.
)
Replace the bulb, exerting a slight
axial force.
)
Refi t the connector, until it is all
the way in.
)
Refi t the protective cap B
.
Directional lamp
)
Remove the protective cap C
.
)
Disconnect the connector by
pressing it between the thumb
and index fi nger.
)
Free the bulb from its two metal
clamps.
)
Take out the bulb.
)
Replace the bulb, exerting a
slight axial force.
)
Refi t the connector, until it is all
the way in.
)
Refi t the protective cap C
.
Page 186 of 316
XI
184
PRACTICAL INFORMATION
Front foglamps
)
Remove the fi xing screw of
cover A
using a torx tool, tip the
cover over and remove.
)
Remove the fi xing screw of
lamp B
using a torx tool and pull
the headlamp unit to remove it
from the bumper.
)
Disconnect the connector D
.
)
Remove the bulb by performing
a quarter of a turn.
)
Replace the bulb.
)
Refi t the connector D
.
)
Refi t the headlamp unit in the
bumper.
)
Refi t the lamp screws.
)
Position the cover using its
guides and refi t the screws.
Bulbs:
H8
Direction indicators
)
Remove the fi xing screw of
cover A
using a torx tool, tip the
cover over and remove.
)
Remove the fi xing screw of
lamp B
using a torx tool and pull
the headlamp unit to remove it
from the bumper.
)
Detach the bulb C
by pressing
on bars 1
and 2
.
)
Disconnect the connector (pull
whilst pressing on the grey
tongue using a fl at screwdriver).
)
Replace the bulb.
)
Refi t the connector (push the
grey tongue in well).
)
Refi t the headlamp unit in the
bumper.
)
Refi t the lamp screws.
)
Position the cover using its
guides and refi t the screws.
Bulbs:
HP24W
Page 187 of 316
XI
185
PRACTICAL INFORMATION
The side repeater is sealed.
If the bulb is faulty, replace the side
repeater.
Contact a CITROËN dealer or a
qualifi ed workshop.
Side repeaters
Rear lamps (Saloon)
Identify the failed bulb.
1.
Brake lamps and sidelamps:
P 21 W / 5 W
2.
Sidelamps:
R 5 W
3.
Reversing
lamps
:
H 21 W
4.
Foglamps:
H 21 W
5.
Direction indicators:
PY 21 W
)
Open the boot.
)
Using a fl at screwdriver, remove
the 3 clips which fi x the trim in
the lamp area.
)
Partially remove the trim F
.
)
Disconnect the connector G
.
Boot-mounted lamps
)
Unclip the bulb holder H
.
)
Replace the bulb.
)
Refi t the bulb holder H
.
)
Check that the bulb holder H
is se-
cured correctly by the two clips 6
.
)
Refi t the connector G
.
)
Replace and fi x the trim F
with its
clips.
When refi tting, take care not to
trap the electrical cables.
Page 188 of 316
XI
186
PRACTICAL INFORMATION
Wing-mounted lamps
)
Remove the lateral boot trim
fl ap A
. To do so, pull it towards
the inside of the boot, then pull it
upwards.
)
Disconnect connector B
.
)
Unscrew the 2 fi xings C
.
)
Remove the lamp from its housing.
)
Detach the bulb holder D
.
)
Replace the bulb.
)
Refi t the bulb holder D
.
)
Place the lamp in its housing.
)
Screw in the 2 fi xings C
.
)
Refi t connector B
.
)
Refi t the trim A
.
You can use the wheelbrace to
screw or unscrew the fi xings C
.
Page 189 of 316
XI
187
PRACTICAL INFORMATION
Boot-mounted lamps
)
Open the boot.
)
Using a fl at screwdriver, remove
the plastic cover F
.
)
Disconnect the connector G
.
)
Unscrew the fi xing nut H
.
)
Disengage the lamp from its
housing.
Rear lamps (Tourer)
Identify the failed bulb.
1.
Brake lamps and sidelamps:
P 21 W / 5 W
2.
Sidelamps:
R 5 W
3.
Reversing
lamps
:
H 21 W
4.
Foglamps:
H 21 W
5.
Direction indicators:
PY 21 W
)
Unclip the bulb holder J
.
)
Replace the bulb.
)
Refi t the bulb holder J
ensur-
ing that it is correctly clipped in
place.
)
Position the lamp in its housing.
)
Tighten the fi xing nut H
.
)
Refi t the connector G
.
)
Position and clip in place the
plastic cover F
.
You can use the wheelbrace to screw
or unscrew the fi xing nut H
.
Page 190 of 316
XI
188
PRACTICAL INFORMATION
Wing-mounted lamps
Remove the lateral boot trim A
.
To do so:
)
Pull it towards towards the inside
of the boot.
)
Pull it upwards.
)
Disconnect the connector B
.
)
Unscrew the fi xing nut C
.
)
Remove the lamp from its housing.
)
Detach the bulb holder D
.
)
Replace the faulty bulb.
)
Refi t the bulb holder D
.
)
Place the lamp in its housing.
)
Screw in the fi xing nut C
.
)
Refi t the connector B
.
)
Refi t the trim A
.
You can use the wheelbrace to screw
or unscrew the fi xing nut C
.