ignition Citroen C5 DAG 2009.5 (RD/TD) / 2.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2009.5, Model line: C5 DAG, Model: Citroen C5 DAG 2009.5 (RD/TD) / 2.GPages: 306, PDF Size: 18.91 MB
Page 7 of 306
I
26M O N I T O R I N G
A few definitions…
Range
(miles or km) Current fuel consumption
( m p g o r l / 1 0 0 k m o r k m / l )
Average fuel
consumption
( m p g o r l / 1 0 0 k m o r k m / l ) Distance travelled
(miles or km) Average speed
( m p h o r k m / h )
This indicates the distance which
can still be travelled with the fuel re-
maining in the tank in relation to the
average fuel consumption over the
last few miles (kilometres) travelled. T h i s v a l u e m a y v a r y f o l l o w i n g a
c h a n g e i n t h e s t y l e o f d r i v i n g o r
t h e r e l i e f , r e s u l t i n g i n a s i g n i fi c a n t
change in the current fuel con-
sumption.
W h e n t h e r a n g e f a l l s b e l o w 2 0 m i l e s
( 3 0 k m ) , d a s h e s a r e d i s p l a y e d . A f t e r
fi l l i n g w i t h a t l e a s t 5 l i t r e s o f f u e l ,
the range is recalculated and is dis-
p l a y e d w h e n i t e x c e e d s 6 0 m i l e s
( 1 0 0 k m ) .
I f d a s h e s a r e d i s p l a y e d c o n t i n u -
o u s l y w h i l e d r i v i n g i n p l a c e o f t h e
d i g i t s , c o n t a c t a C I T R O Ë N d e a l e r . T h i s f u n c t i o n i s o n l y d i s p l a y e d f r o m
2 0 m p h ( 3 0 k m / h ) .
This is the average fuel consump-
tion during the last few seconds.
This is the average fuel consump-
t i o n s i n c e t h e l a s t t r i p c o m p u t e r z e r o
reset.
This indicates the distance travelled
s i n c e t h e l a s t t r i p c o m p u t e r z e r o r e s e t . This is the average speed calculat-
e d s i n c e t h e l a s t t r i p c o m p u t e r z e r o
reset (ignition on).
Page 10 of 306
I!
28M O N I T O R I N G
Indicator and warning lamps
V i s u a l i n d i c a t o r s i n f o r m i n g t h e d r i v e r t h a t a s y s t e m i s i n o p e r a t
i o n ( o p e r a t i o n o r
deactivation indicator lamps) or of the occurrence of a fault (wa rning lamp).
When the ignition is switched on
C e r t a i n w a r n i n g l a m p s c o m e o n f o r a f e w s e c o n d s w h e n t h e v e h i c l e ' s i g n i t i o n
is switched on.
W h e n t h e e n g i n e i s s t a r t e d , t h e s e s a m e w a r n i n g l a m p s s h o u l d s w i t c h o f f .
I f t h e y r e m a i n o n , b e f o r e m o v i n g o f f , r e f e r t o t h e i n f o r m a t i o n o n t h e w a r n i n g l a m p c o n c e r n e d .
Associated warnings
T h e s w i t c h i n g o n o f c e r t a i n w a r n i n g l a m p s m a y b e a c c o m p a n i e d b y a n a u d i b l e
signal and a message on the multifunction screen.
Operation indicator lamps
I f o n e o f t h e f o l l o w i n g i n d i c a t o r l a m p s c o m e s o n , t h i s c o n fi r m s t h a t t h e c o r r e -
s p o n d i n g s y s t e m h a s c o m e i n t o o p e r a t i o n .
T h e w a r n i n g l a m p s m a y c o m e
o n c o n t i n u o u s l y ( fi x e d ) o r fl a s h .
C e r t a i n w a r n i n g l a m p s m a y c o m e
o n i n t w o d i f f e r e n t m o d e s . O n l y
b y r e l a t i n g t h e t y p e o f l i g h t i n g t o
the operating status of the vehicle
can it be ascertained whether the
situation is normal or whether a
fault has occurred.
Warning lamp is on Cause Action/Observations
Left-hand
direction
indicato
r fl a s h i n g w i t h
b u z z e r . The lighting stalk is pushed down.
Right-hand
direction
indicator fl a s h i n g w i t h
b u z z e r . The lighting stalk is pushed up.
Sidelamps fi x e d . The lighting stalk is in the
" S i d e l a m p s " p o s i t i o n . Turn the control to the desired
position.
Dipped beam
headlamps fi x e d . T h e l i g h t i n g s t a l k i s i n t h e " D i p p e d
beam headlamps" position. Turn the control to the desired
position.
Main beam
headlamps fi x e d . The lighting stalk is pulled towards
y o u . Pull the stalk to return to dipped
beam headlamps.
Page 11 of 306
I
29
M O N I T O R I N G
Warning lamp is on Cause Action/Observations
Front
foglamps fi x e d .
The front foglamps are switched on. Turn the ring on the stalk rearwards
twice to switch off the front foglamps.
Rear
foglamps fi x e d .
The rear foglamps are switched on. Turn the ring on the stalk rearwards
to switch off the rear foglamps.
Diesel engine
pre-heating fi x e d . The ignition switch is at the 2nd
position (ignition on). Wait until the warning lamp has
switched off before starting. The duration for which the warning lamp is
o n i s d e t e r m i n e d b y t h e c l i m a t i c c o n d i t i o n s .
Parking
brake fi x e d .
The parking brake is applied or not
p r o p e r l y r e l e a s e d . Release the parking brake to switch
o f f t h e w a r n i n g l a m p , k e e p i n g y o u r
foot on the brake pedal.
O b s e r v e t h e s a f e t y r e c o m m e n d a t i o n s .
For further information on the
p a r k i n g b r a k e , r e f e r t o t h e " D r i v i n g "
section.
fl a s h i n g .
T h e p a r k i n g b r a k e i s n o t f u l l y a p p l i e d
or is released.
Passenger's
airbag
system fi x e d . T h e c o n t r o l s w i t c h , l o c a t e d i n t h e
g l o v e b o x , i s i n t h e "
ON " position.
T h e p a s s e n g e r ' s f r o n t a i r b a g i s
activated.
I n t h i s c a s e , d o n o t i n s t a l l a r e a r -
facing child seat. Turn the control switch to the "
OFF "
position to deactivate the front
p a s s e n g e r ' s a i r b a g .
I n t h i s c a s e y o u c a n i n s t a l l a r e a r -
facing child seat.
T h e p a s s e n g e r ' s a i r b a g s y s t e m i s
a u t o m a t i c a l l y p u t i n t o s e r v i c e o n
starting the vehicle (" ON " position).
Page 17 of 306
I
35
M O N I T O R I N G
Service indicator
S y s t e m w h i c h i n f o r m s t h e d r i v e r
w h e n t h e n e x t s e r v i c e i s d u e , i n a c -
c o r d a n c e w i t h t h e m a n u f a c t u r e r ' s
servicing schedule.
The point at which the service is due
is calculated from the last indicator
z e r o r e s e t . I t i s d e t e r m i n e d b y t w o
parameters:
- t h e d i s t a n c e t r a v e l l e d ,
- the time elapsed since the last service.
More than 620 miles (1 000 km)
remain before the next service is due
For 5 seconds after the ignition is
s w i t c h e d o n , t h e s p a n n e r s y m b o l -
ising the service operations comes
o n . T h e d i s t a n c e r e c o r d e r d i s p l a y
line indicates the distance remaining
before the next service is due.
Example: 1 9 0 0 m i l e s / k m r e m a i n
before the next service is due.
For 5 seconds after the ignition is
s w i t c h e d o n , t h e d i s p l a y i n d i c a t e s : 5 seconds after the ignition is switched
o n ,
the spanner is switched off ; the
distance recorder resumes its normal
o p e r a t i o n . T h e d i s p l a y t h e n i n d i c a t e s
the total and trip distances.
Less than 620 miles (1 000 km)
remain before the next service is due
Examples: 5 0 0 m i l e s ( 9 0 0 k m ) r e -
main before the next service is due.
For 5 seconds after the ignition is
s w i t c h e d o n , t h e d i s p l a y i n d i c a t e s :
5 seconds after the ignition is
s w i t c h e d o n , t h e d i s t a n c e r e c o r d e r
resumes its normal operation. The
spanner remains on to indicate that
a service must be carried out soon. Service overdue
For 5 seconds after the ignition is
s w i t c h e d o n ,
t h e s p a n n e r fl a s h e s
to indicate that the service must be
carried out as soon as possible.
Example: t h e s e r v i c e i s o v e r d u e b y
3 0 0 m i l e s / k m .
For 5 seconds after the ignition is
s w i t c h e d o n , t h e d i s p l a y i n d i c a t e s :
5 seconds after the ignition is
s w i t c h e d o n , t h e d i s t a n c e r e c o r d e r
resumes its normal operation. The
spanner remains lit .
T h e d i s t a n c e r e m a i n i n g m a y b e
w e i g h t e d b y t h e t i m e f a c t o r , d e p e n d -
i n g o n t h e d r i v e r ' s d r i v i n g h a b i t s .
T h e r e f o r e , t h e s p a n n e r m a y a l s o
c o m e o n i f y o u h a v e e x c e e d e d t h e
t w o y e a r s e r v i c e i n t e r v a l .
Page 18 of 306
I
36M O N I T O R I N G
Service indicator zero reset
A f t e r e a c h s e r v i c e , t h e s e r v i c e i n d i -
c a t o r m u s t b e r e s e t t o z e r o .
T h e p r o c e d u r e f o r r e s e t t i n g t o z e r o
is as follows:
s w i t c h o f f t h e i g n i t i o n ,
press and hold the trip distance
r e c o r d e r z e r o r e s e t b u t t o n ,
switch on the ignition; the dis-
t a n c e r e c o r d e r d i s p l a y b e g i n s a
c o u n t d o w n ,
w h e n t h e d i s p l a y i n d i c a t e s "=0" ,
release the button; the spanner
disappears.
F o l l o w i n g t h i s o p e r a t i o n , i f y o u w i s h
t o d i s c o n n e c t t h e b a t t e r y , l o c k t h e
v e h i c l e a n d w a i t a t l e a s t fi v e m i n u t e s
f o r t h e z e r o r e s e t t o b e t a k e n i n t o a c -
count. Engine oil level indicator
S y s t e m w h i c h i n f o r m s t h e d r i v e r
whether the engine oil level is cor-
rect or not.
This information is indicated for a
few seconds when the ignition is
s w i t c h e d o n , a f t e r t h e s e r v i c e i n f o r -
mation.
T h e l e v e l r e a d w i l l o n l y b e c o r r e c t i f
the vehicle is on level ground and
the engine has been off for more
t h a n 1 5 m i n u t e s .
Oil level correct
Oil level low
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level incorrect".
I f t h e l o w o i l l e v e l i s c o n fi r m e d b y a
c h e c k u s i n g t h e d i p s t i c k , i t i s e s s e n -
tial that the level is topped up to pre-
vent damage to the engine. Oil level gauge fault
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level measurement in-
v a l i d " . C o n s u l t a C I T R O Ë N d e a l e r .
Page 19 of 306
I
36M O N I T O R I N G
Service indicator zero reset
A f t e r e a c h s e r v i c e , t h e s e r v i c e i n d i -
c a t o r m u s t b e r e s e t t o z e r o .
T h e p r o c e d u r e f o r r e s e t t i n g t o z e r o
is as follows:
s w i t c h o f f t h e i g n i t i o n ,
press and hold the trip distance
r e c o r d e r z e r o r e s e t b u t t o n ,
switch on the ignition; the dis-
t a n c e r e c o r d e r d i s p l a y b e g i n s a
c o u n t d o w n ,
w h e n t h e d i s p l a y i n d i c a t e s "=0" ,
release the button; the spanner
disappears.
F o l l o w i n g t h i s o p e r a t i o n , i f y o u w i s h
t o d i s c o n n e c t t h e b a t t e r y , l o c k t h e
v e h i c l e a n d w a i t a t l e a s t fi v e m i n u t e s
f o r t h e z e r o r e s e t t o b e t a k e n i n t o a c -
count. Engine oil level indicator
S y s t e m w h i c h i n f o r m s t h e d r i v e r
whether the engine oil level is cor-
rect or not.
This information is indicated for a
few seconds when the ignition is
s w i t c h e d o n , a f t e r t h e s e r v i c e i n f o r -
mation.
T h e l e v e l r e a d w i l l o n l y b e c o r r e c t i f
the vehicle is on level ground and
the engine has been off for more
t h a n 1 5 m i n u t e s .
Oil level correct
Oil level low
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level incorrect".
I f t h e l o w o i l l e v e l i s c o n fi r m e d b y a
c h e c k u s i n g t h e d i p s t i c k , i t i s e s s e n -
tial that the level is topped up to pre-
vent damage to the engine. Oil level gauge fault
T h i s i s i n d i c a t e d b y d i s p l a y i n g o f t h e
message "Oil level measurement in-
v a l i d " . C o n s u l t a C I T R O Ë N d e a l e r .
Page 42 of 306
III
59
C O M F O R T
FRONT SEATS
ELECTRIC ADJUSTMENTS
To adjust the electric seats, switch on the ignition or start the engine if the vehicle
has gone into economy mode.
Seat adjustments are also possible for a short period after ope ning one of the
front doors or switching off the ignition.
2. Adjustment of the backrest
angle
Move the control forwards or backwards to adjust the backrest
angle.
3. Adjustment of the angle of the
top of the backrest
Move the control forwards or backwards to adjust the angle of
the top of the backrest.
1. Adjustment of the seat height
and angle, and longitudinal
adjustment
Raise or lower the front of the
control to adjust the seat cush-
ion angle.
Raise or lower the rear of the
control to raise or lower the seat.
Simultaneously raise or lower
the front and rear of the control
in order to raise or lower the
entire seat.
4. Adjustment of lumbar support
This function allows you to inde- pendently adjust the height and
level of lumbar support.
Move the control:
Forwards or backwards to in-
crease or reduce the lumbar
support.
Upwards or downwards to raise
or lower the lumbar support
zone.
Head restraint height and
angle adjustments on electric
seats
To adjust the angle of the head
restraint, push back or pull for-
ward section C of the head re-
straint until you reach the desired
position.
To raise it, pull upwards.
To lower it, press on the control D
to unlock it, and simultaneously on
the head restraint itself.
To remove it, press on the control D
to unlock it, then pull it upwards.
Page 43 of 306
III
60
C O M F O R T
This function provides the driver with
a back massage. It only operates
when the engine is running.
Press on button A .
The warning lamp comes on and the
massage function is activated for a
period of 1 hour. During this time,
massage is performed in cycles of
6 minutes (4 minutes of massage fol-
lowed by 2 minutes break). In total,
the system will perform 10 cycles.
After 1 hour, the function is deacti-
vated. The warning lamp goes out.
Massage function The Welcome function
The welcome function assists entry
and leaving the vehicle.
After switching off the ignition and
opening the driver’s door, the seat
moves back automatically and then
stays in this position, ready for the
next entry to the vehicle.
When switching on the ignition, the
seat moves forward to the memo-
rised driving position.
When moving the seat, take care
that no person or object hinders the
automatic movement of the seat.
This function is deactivated by de-
fault. You may activate or deactivate
this function using the "Main Menu"
on the instrument panel screen. To
do so, select "Vehicle parameters/
Comfort/Driver welcome".
Deactivation
You can deactivate the massage
function at any time by pressing on
button A .
Heated seats control
With the engine running, the front
seats can operate separately.
Use the corresponding adjust-
ment dial, placed on the outer
side of each front seat, to switch
on and select the level of heating
required:
0 : Off.
1 : Low.
2 : Medium.
3 : High.
Page 44 of 306
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints
removed, they must be in place
and correctly adjusted.
Page 45 of 306
III
61
C O M F O R T
Storing driving positions
System which takes into account the
settings of the driver's seat and air
conditioning. It enables you to store
up to two positions using the buttons
on the side of the driver's seat. Storing a position
Using buttons M/1/2
Switch on the ignition.
Adjust your seat.
Press button M , then press but-
ton 1 or 2 within four seconds.
An audible signal is heard indicating
that the settings have been stored.
Storing a new position cancels the
previous position.
Recalling a stored position
Ignition on or engine running
B r i e fl y p r e s s b u t t o n 1 or 2 to re-
call the corresponding position.
An audible signal is heard indicating
the end of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery. For your safety, avoid storing a
driving position while driving.
REAR HEAD RESTRAINTS
The rear head restraints can be re-
moved and have two positions:
- high, position for use,
- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high
position, push the lug and pull it
upwards.
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints
removed, they must be in place
and correctly adjusted.