ECU Citroen C5 RHD 2011.5 (RD/TD) / 2.G Owner's Manual

6
FAMILIARISATION

The bonnet release should only be ope-
rated when the vehicle is stationary.



)
Open the left hand front door.

)
Pull release lever A
to unlock the
bonnet.

Opening the bonnet

ACCESS


)
Lift safety catch B
, then raise the
bonnet.
Saloon


Tourer




Spare wheel


The tools are located in a protective
holder inside the spare wheel.



179



Access to the spare wheel

To access the spare wheel:


)
Lift up the boot fl oor and fold it in
two (Saloon) or secure it using the
retractable grip (Tourer).

)
Attach the hook to the top of the
boot.

)
To remove the spare wheel, detach
the strap then push the wheel for-
wards, before lifting it out.



Temporary puncture repair kit

The kit is a complete system comprised
of a compressor and a sealant car-
tridge.



176




164

I
31
MONITORING

Return to the main instrument
panel screen display
Successive rotations of the left-hand
thumb wheel on the steering wheel
allow you to return to the main instrument
panel screen display (vehicle speed),
via the navigation information screen,
then the screen displaying only the total
mileage and the trip mileage (bottom of
screen).


Display of navigation
information on instrument
panel screen
You can display navigation informa-
tion on the instrument panel screen
by rotating the left-hand thumb
wheel on the steering wheel.










Log of alerts

This function allows you to display
the log of alerts.


)
Press on button A
.
The following messages appear
consecutively on the instrument
panel screen:


- Tyre pressure check.

- Service indicator reminder.

- Display of message alerts.

- Oil level check.

III
65
COMFORT












Storing driving positions

System which stores the settings of
the driver's seat and air conditioning.
Up to two positions can be stored
using the buttons on the side of the
driver's seat.
Storing a position

Using buttons M/1/2


)
Switch on the ignition.

)
Adjust your seat.

)
Press button M
, then press but-
ton 1
or 2
within four seconds.
An audible signal confi rms that the
settings have been stored.
Storing a new position cancels the
previous position.

Recalling a stored position

Ignition on or engine running


)
Briefl y press button 1
or 2
to re-
call the corresponding position.
An audible signal indicates the end
of the adjustment.
When the ignition is on, after a few
consecutive position recalls, the
function will be deactivated until the
engine is started, to prevent dis-
charging of the battery.
For your safety, avoid storing a
driving position while driving.









REAR HEAD RESTRAINTS

The rear head restraints can be
removed and have two positions:


- high, position for use,

- low, storage position.
To raise a head restraint, pull it up-
wards.
To lower it, press the lug then the
head restraint.
To remove it, place it in the high posi-
tion, push the lug and pull it upwards.
To r efi t it, engage the head restraint
rods in the holes taking care to re-
main in line with the seat back.
Never drive with the head restraints
removed, they must be in place and
correctly adjusted.

III
66
COMFORT











REAR SEATS

Bench seat, the left-hand (2/3) or
right-hand (1/3) section of which
can be folded to adapt the boot load
space.

Removing the seat cushion



)
Move the corresponding front
seat forwards if necessary.

)

Raise the front of the seat cushion 1
.


)
Tilt the seat cushion 1
fully
against the front seat.

)
Remove the seat cushion 1
from
its fi xings by pulling upwards.



Refitting the seat cushion



)
Position the seat cushion 1
verti-
cally in its fi xings.

)
Fold down the seat cushion 1
.

)
Press on the seat cushion to
secure it.



Folding the seat

In order to fold a rear seat without
any risk of damage, always start
with the seat cushion, never with
the seat back:



)
move the corresponding front
seat forwards if necessary,

)

raise the front of the seat cushion 1
,


)
tilt the seat cushion 1
fully against
the front seat,

)
check that the seat belt is posi-
tioned correctly on the side of
the seat back,

)
lower or remove the head re-
straints if necessary,

)
pull the control 3
forwards to re-
lease the seat back 2
,

)
tilt the seat back 2
.
The seat cushion 1
can be removed
to increase the loading volume.


Returning the seat back to its
original position
When returning the rear seat to its
original position:


)
put the seat back 2
in the upright
position and secure it,

)
fold the seat cushion 1
,

)
refi t the head restraints or put
them back in place.
When returning the rear seat to its
original position, take care not to trap
the seat belts and ensure that their
buckles are positioned correctly.
The red indicator on the control 3

should no longer be visible; if it is,
push the seat fully back.

VI
103
FITTINGS








BOOT FITTINGS (SALOON)



1.
Battery location for vehicles with
V6 HDi engine.

2.
Boot fl oor (spare wheel storage).
3.
Boot lamp.

4.
Location for 6 CD changer.







Luggage securing rings



)
Use the 4 securing rings on the
boot fl oor to secure your lug-
gage.
For safety reasons in the event of
sharp braking, you are advised to
place heavy objects as far forward
in the boot as possible.

VI
104
FITTINGS








BOOT FITTINGS (TOURER)



1.
Hook


For shopping bags.

2.
Torch


To recharge, return it to its storage
position.

3.
Storage net
or Battery compart-
ment (for vehicles with 3 litre
V6 HDi engine).


This provides access to the battery.



1.
Luggage-cover blind


(see details on following page)

2.
Luggage securing rings


Use the 4 stowing rings provided
on the boot fl oor to secure your
loads.
For safety reasons in the event
of sharp braking, you are ad-
vised to place heavy objects as
far forwards as possible.

3.
Hooks


These allow a cargo net to be
fi tted (see details on following
page).

1.
Boot lamp


2.
12 V accessories socket
(100 W maximum)

Cigarette lighter type 12 volt
socket. It is located on the rear
right-hand trim.

3.
Loading height control


You can change the height of the
vehicle to make loading or un-
loading easier.

4.
Hook


For shopping bags.

5.
Storage net
or closed housing


Location for the 6 CD changer.

VI
105
FITTINGS





LUGGAGE COVER (TOURER)


To roll up



)
Press the handle (PRESS) gently.
The luggage cover rolls up auto-
matically.
The moving part A
can be folded
along the rear bench seat backrest.


To remove



)
Compress the control 1
and lift
the luggage cover on the right
then on the left to remove it.



To install



)
Position the left-hand end of the
luggage cover roller in its loca-
tion B
behind the rear bench
seat.

)
Compress the roller control 1

and put the roller in place in its
location C
on the right.

)
Release the control to secure
the luggage cover.

)
Unroll it to its fastening on the
rear pillar.








High load retaining net
(Tourer)
Hooked onto the special upper and
lower fi xings, this permits use of the
entire loading volume up to the roof:


- behind the rear seats (row 2),

- behind the front seats (row 1)
when the rear seats are folded.
When positioning the net, check that
the strap loops are visible from the
boot; this will make slackening or
tightening easier.

VI
106
FITTINGS

Installation


)
fold down the backs of the rear
seats,

)
position the high load retaining
net roller above the two rails 1

located behind the rear seats
(2/3 bench seat). The two notch-
es 2
must be placed above the
two rails,

)
slide the two rails 1
into the
notches 2
and push the roller
(lengthways) from right to left to
secure it,

)
reposition the rear seat backs.

Row 1
Row 2
To use it in row 1:


)
fold down the
backs of the
rear seats,

)
open the cov-
ers 3
of the
corresponding
upper fi xings,

)
unroll the high load retaining net
and position one of the ends of
the net's metal bar in the cor-
responding fi xing cover. Check
that the hook is secured in the
rail located inside the cover 3
,

)
pull the high load retaining net's
metal bar to position the other
hook in the second fi xing cover.
To use it in row 2:


)
open the cov-
ers 4
of the
corresponding
upper fi xings,

)
from the rear bench seat, unroll
the high load retaining net, push-
ing it to detach it from the retaining
hooks,

)
position one of the ends of the
net's metal bar in the corre-
sponding fi xing cover. Check
that the hook is secured in the
rail located inside the cover,

)
position the other hook in the
second fi xing cover and pull the
metal bar towards you.

VII
109
CHILD SAFETY
CHILD SEATS RECOMMENDED BY CITROËN

CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt
:


Group 0+: from birth to 13 kg









L1

"RÖMER Baby-Safe Plus"
Installed in the rearwards-facing position.


Groups 2 and 3: from 15 to 36 kg








L3

"RECARO Start''






L4

"KLIPPAN Optima"
From the age of 6 years
(approximately 22 kg),
the booster is used on its own.







L5

"RÖMER KIDFIX"
Can be fi tted to the vehicle's ISOFIX mountings.
The child is restrained by the seat belt.

VII
110
CHILD SAFETY














POSITIONS FOR CHILD SEATS SECURED USING THE SEAT BELT

In conformity with European law, this table shows you the possibilities for the installation of universally approved child
seats (a) using a seat belt, depending on the weight of the child and the seating position in the vehicle.
(a) Universal child seat: child seat which can be installed in all vehicles using the seat belt.
(b) Consult the current legislation for your country before driving with your child in this seat.
(c) Group 0: from birth to 10 kg. Shells and "car cots" cannot be installed on the front passenger seat.

U:
seat position suitable for installation of universally approved rearwards-facing and/or forwards-facing child seat.

U (R):
As U
, with the vehicle seat, which must be adjusted to the highest position.

Seat position(s)



Weight of child



Groups 0 (c)
and 0+
< 13 kg


Group 1
9 to 18 kg


Group 2
15 to 25 kg


Group 3
22 to 36 kg



Row 1
Front passenger (b) with
height adjustment

U (R )

U (R)


U (R)


U (R)


Front passenger (b)
without height
adjustment

U


U


U


U


Row 2
Outer rear


U


U


U


U


Centre rear


U


U


U


U