ESP Citroen C5 RHD 2012 (RD/TD) / 2.G Owner's Manual

9
FAMILIARISATION
INSTRUMENTS AND CONTROLS



1.
Sunshine sensor.

2.
Soft diffusion air conditioning adjustment wheel.

3.
Passenger’s airbag.

4.
Side window demist vent.

5.
Passenger’s air vents.

6.
Bonnet release.

7.
Hazard warning lamps switch.

8.
Switch in the glove box:


- Passenger’s airbag activation/deactivation

9.
Glove box:


- Vehicle document storage

- Audio-video sockets

- Fusebox access fl ap

10.
ESP/Parking Sensors/Lane Departure Warning
System controls.

11 .
Suspension controls:


- Ground clearance adjustment

- Sport mode

12.
Armrest with cup-holder.

13.
Electric parking brake.

14.
Automatic gearbox SPORT/SNOW mode controls.

15.
Ashtray with cigar lighter.

16.
Gear lever.

17.
Storage.

18.
Audio and telematics system.

19.
Air conditioning controls.

20.
Storage.

21.
Multifunction screen.

22.
Emergency or assistance call controls.

16
FAMILIARISATION
MONITORING


Tyre under-inflation detection

The tyre under-infl ation detection sys-
tem is a driving aid which informs you
of the state of your tyres.
It does not replace either vigilance or
responsibility on the part of the driver.

Economy mode

After switching off the engine, some sys-tems (radio, wipers, electric windows,
opening roof, electric seats, telephone,
video, interior lighting, motorised tail-
gate, etc.) are supplied electrically for a
maximum of no more than around one
hour, so as to avoid discharging the
battery.
This period may be reduced considerably
if the battery’s state of charge is low.
Once this period is over, a message is
displayed in the instrument panel screen
and the active functions are placed on
standby.
These functions will be automatically
reactivated when the vehicle is restarted.


117




200

I
34
MONITORING




Dynamic
stability
control
(ESP/ASR)


fl ashing. The ESP/ASR regulation is
active. The system optimises traction and
improves the directional stability of
the vehicle.
fi xed, accompanied
by an audible signal
and a message in
the instrument panel
screen.
Unless it has been deactivated
with the indicator lamp in
the button on, the ESP/ASR
system has a fault. Have it checked by a CITROËN dealer or a
qualifi ed workshop.




Engine
autodiagnosis
system


fi xed. The emission control system
has a fault. The warning lamp should go off when
the engine is started.
If it does not go off, contact a CITROËN
dealer or qualifi ed workshop without delay.

fl ashing. The engine management
system has a fault. Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or
a qualifi ed workshop.

Warning lamp



is on



Cause



Action/Observations



Brake pad
wear


fi xed, accompanied
by an audible signal
and a message in
the multifunction
screen.
The brake pads are at an
advanced state of wear. Have the brake pads replaced by a
CITROËN dealer or a qualifi ed workshop.

Deactivation of
the automatic
functions of
the electric
parking brake


fi xed. The "automatic application"
(on switching off the engine)
and "automatic release"
functions are deactivated or
faulty. Activate the function (according to country)
via the vehicle confi guration menu or
contact a CITROËN dealer or a qualifi ed
workshop if automatic application/release is
not possible.
The parking brake can be released
manually using the emergency release
procedure.
For more information on the electric parking
brake, refer to the "Driving" section.

I
36
MONITORING




Front
foglamps


fi xed. The front foglamps are switched on. Turn the ring on the stalk rearwards
twice to switch off the front foglamps.




Rear
foglamps


fi xed. The rear foglamps are switched on. Turn the ring on the stalk rearwards
to switch off the rear foglamps.









Operation indicator lamps
If one of the following indicator lamps comes on, this confi rms that the corresponding system has come into operation.
It may be accompanied by an audible signal and a message on the multifunction screen.



Warning lamp



is on



Cause



Action/Observations






Left-hand
direction
indicato

r


fl ashing with
buzzer. The lighting stalk is pushed down.





Right-hand
direction
indicator


fl ashing with
buzzer. The lighting stalk is pushed up.






Sidelamps


fi xed. The lighting stalk is in the
"Sidelamps" position.




Dipped beam
headlamps


fi xed. The lighting stalk is in the "Dipped
beam headlamps" position.





Main beam
headlamps


fi xed.
The lighting stalk is pulled towards you. Pull the stalk to return to dipped
beam headlamps.



Hazard
warning
lamps


fl ashing with
audible signal. The hazard warning lamps switch,
located on the dashboard, has been
operated. The left-hand and right-hand direction
indicators and their associated
indicator lamps fl ash simultaneously.

I
38
MONITORING










Deactivation indicator lamps
If one of the following indicator lamps comes on, this confi rms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message on the multifunction screen.



Warning lamp



is on



Cause



Action/Observations






Passenger's
airbag
system


fi xed. The control, located in the
glove box, is set to the OFF

position.
The passenger's front airbag
is deactivated.
In this case you can install a
"rear facing" child seat. Set the control to the ON
position to
activate the passenger's front airbag.
In this case, do not fi t a child seat in the
rear-facing position.





ESP/ASR


fi xed.
The button, located in the middle
of the dashboard, is pressed.
Its indicator lamp is on.
The ESP/ASR is deactivated.
ESP: electronic stability
programme.
ASR: anti-skid regulation. Press the button to activate the ESP/ASR.
Its indicator lamp switches off.
The ESP/ASR system is activated
automatically when the vehicle is started.
If deactivated, the system is reactivated
automatically from approximately 30 mph
(50 km/h).

I
41
MONITORING















Engine oil temperature gauge

Under normal operating conditions,
the bars should be within section 1
.
In severe operating conditions, the
bars may extend into section 2
.

In this event, slow down, and if neces-
sary, stop the engine and check the
levels (see corresponding section).


Coolant temperature gauge

Under normal operating conditions,
the bars should be within section 1
.

In severe operating conditions, the
bars may extend into section 2
, the
engine coolant temperature warning
lamp A
and the STOP
warning lamp
come on, stop as soon as it is safe
to do so
. Switch off the ignition. The
cooling fan may continue to oper-
ate for a certain time
.

Contact a CITROËN dealer or a
qualifi ed workshop.

If the SERVICE
warning lamp comes on, check the levels (see corre-
sponding chapter). On horizontal ground, illumination of
the fuel low warning lamp indicates
that you are at the reserve level.
An alert message is displayed in the
instrument panel.







Fuel gauge

II
45
MULTIFUNCTION SCREENS










16/9 COLOUR SCREEN
(WITH MYWAY )

Displays on the screen

It displays the following information
automatically and directly:


- time,

- date,

- altitude,

- ambient temperature (the value
displayed fl ashes if there is a risk
of ice),

- audio functions,

- satellite navigation system infor-
mation.



Controls

From the MyWay control panel, to
select one of the applications:


)
press the dedicated "RADIO"
,
"MUSIC"
, "NAV"
, "TRAFFIC"
,
"SETUP"
or "PHONE"
button
for access to the corresponding
menu,

)
turn the dial to move the selection,

)
press the dial to confi rm the se-
lection,
or

)
press the "ESC"
button to aban-
don the current operation and re-
turn to the previous display.

* According to country. For more information on these
applications, refer to the "Audio
Equipment" section or to the spe-
cifi c user guide given to you with
the other owner's documents.


"SETUP" menu




)
Press the "SETUP"
button to
gain access to the "SETUP"

menu. This allows you to select
from the following functions:


- "System language",

- "Date & time",

- "Display",

- "Units",

- "System".



System language

This menu allows you to select the lan-guage used by the display: Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Polski, Portugues,
Türkçe * .

II
48
MULTIFUNCTION SCREENS

* According to country.


"SETUP" menu



)
Press the "SETUP"
button to gain
access to the "SETUP"
menu.
This allows you to select from
the following functions:


- "Languages and Speech",

- "Date & Time",

- "Display",

- "Units",

- "System".


Language & Speech
This menu allows you to:


- select the language used by
the display (Deutsch, English,
Espanol, Français, Italiano,
Nederlands, Polski, Portugues,
Türkçe * ),

-
select the voice recognition pa-
rameters (activation/deactivation,
advice on use, personal voice
programming, etc.),

- set the volume of the voice syn-
thesiser.

Date & Time
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the
"Audio Equipment" section or to the
specifi c user guide given to you with
the other owner's documents).

Display
This menu allows you to set the
brightness of the screen, the screen
colour scheme and the colour of the
map (day/night or auto mode).

Units
This menu allows you to select the
units: temperature (°C or °F) and
distance (km or miles).

System
This menu allows you to restore the
factory confi guration, display the
software version and activate scroll-
ing text.
For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.

III
51
COMFORT
































DIGITAL AIR CONDITIONING (MONO-ZONE)

This is the normal sys-
tem operating mode.
In accordance with the
level of comfort chosen,
pressing this control,
confi rmed illumination
of indicator lamp A
, permits automatic
and simultaneous control of all of the
following functions:


- Air fl ow.

- Temperature in the passenger
compartment.

- Air distribution.

- Air intake.

- Air conditioning.
1. Automatic operation
It is advisable to leave all of the
vents open.
Simply pressing one of the controls,
with the exception of control 2
, switches
the system to manual mode.
Indicator lamp A
goes off.
2. Temperature adjustment
Turn control 2
to change
the temperature:


-
Clockwise to increase
the temperature.

- Anticlockwise to re-
duce the temperature.

The setting required is displayed.
The value indicated in the screen
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the screen confi guration.
A setting around the value 21
usu-
ally provides optimum comfort.
However, depending on your re-
quirements, a setting between 18
and 24 is normal.
On entering the vehicle, the interior
temperature may be much colder (or
warmer) than is comfortable. There
is no need to change the tempera-
ture displayed to obtain rapidly the
level of comfort required.
The automatic regulation of the air
conditioning will use its maximum
performance settings to correct the
temperature difference as quickly as
possible. The air conditioning system operates
with the engine running.

Mono-zone:
this is the overall
regulation of the temperature, distri-
bution and fl ow of air in the passenger
compartment.
The symbols and messages associ-
ated with the digital air conditioning
controls appear in the multifunction
screen.


1.
Automatic operation

2.
Temperature adjustment

3.
Air distribution adjustment

4.
Activation/deactivation of the air
conditioning

5.
Air fl ow adjustment

6.
Front demisting - defrosting

7.
Rear demisting - defrosting

8.
Air recirculation - intake of exterior
air

9.
Screen

III
52
COMFORT

Control via the manual controls
It is possible to adjust one or more
functions manually, while leaving the
other functions in automatic mode.


)
Press one of the controls, with
the exception of that which regu-
lates the temperature 2
. Indicator
lamp A
goes off.
Switching to manual mode may result
in discomfort (temperature, humidity,
odour, condensation) and may not
provide optimum comfort.
To return to automatic mode, press
the "AUTO"
control.

3. Air distribution adjustment


)
Press the controls 3

to change the distri-
bution of the air fl ow.
4. Air conditioning
The air conditioning will only oper-
ate when the engine is running. The
air blower control (air fl ow adjust-
ment) must be active to obtain air
conditioning.
Switching off the ventilation


)
Turn control 5
to the
left until the fl ow of
air stops.


)
Press control 4
.
Indicator lamp B

comes on.

5. Air fl ow adjustment


)
Turn control 5
to the
right to increase the
air fl ow or to the left
to reduce it.

6. Front demisting - defrosting
In certain cases, the
"AUTO"
mode may not
be suffi cient to demist or
defrost the windows (hu-
midity, several passen-
gers, ice).


)
Press control 6
to clear the win-
dows quickly. The indicator lamp
comes on. The "OFF"
symbol is displayed in
the multifunction screen.
This action switches off the screen
and the indicator lamps.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
Avoid driving for too long with the air
conditioning off. In order to be effective, the air
conditioning must be used with the
windows closed.
Deactivating the air conditioning may
result in discomfort (temperature,
humidity, odour, condensation).
The indicator lamps corresponding
to the distribution chosen come on:


- Windscreen and front side win-
dows.

- Front ventilation (central and
side vents and air diffusion grille
if open) and rear ventilation.

- Front and rear footwells.
Simultaneous display of the distri-
bution of air to the windscreen and
side windows and of front and rear
ventilation is not possible. The air fl ow level is indicated by the
progressive illumination of the bars
in the control panel screen 9
.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate fl ow of air is main-
tained.
To reactivate the air conditioning:


)
Press control 1
.