steering CITROEN C6 2005 Owners Manual

Downloaded from www.Manualslib.com manuals search engine PRESENTATION
THIS HANDBOOK summarises the specifications, adjustments, checks and special features of CITROËNprivate vehicles, not including UTILITY vehicles for which there exists a
separate handbook.
The handbook is divided into groups representing the main functions:
GENERAL - ENGINE - INJECTION - IGNITION - CLUTCH, GEARBOX, DRIVESHAFTS - AXLES, SUSPENSION, STEERING - BRAKES - HYDRAULICS - AIR CONDITIONING.
Angl-C6-Index-2005 4/02/05 17:10 Page I

Downloaded from www.Manualslib.com manuals search engine AXLES - SUSPENSION - STEERING
Wheels and tyres121 - 124
Checking and adjusting the vehicle height125 - 128
Values for checking and adjusting
the axle geometries129 - 133
Front axle134 - 135
Front axle tightening torques136 - 139
Rear axle140 - 141
Rear axle tightening torques142 - 143
Active suspension with variable damping144 - 149
Suspension tightening torques150 - 154
Draining-filling-bleeding
the hydraulic steering/suspension circuit155 - 158
Power steering specifications159 - 162
Power steering tightening torques163 - 164
Checking the steering assistance
pressure (ES9A engine)165 - 168
Bleeding the hydraulic steering
assistance circuit169AIR CONDITIONING
Quantities: aircon system R134.a 203
Special features: air conditioning circuit 204 - 205
Pollen filter206
Checking the compressor oil level207 - 208
Checking the efficiency of
the air conditioning circuit209 - 215
Air conditioning circuit: ES9A216
Air conditioning circuit: DT17217
CONTENTS
BRAKES
Brake specifications170
Braking system: general specifications171 - 173
Braking system: tightening torques174 - 177
Values for checking and adjusting
the braking system178
General feataures of
the electric parking brake179 - 189
Brake fluid checks190
Drain-fill-bleed the braking system191 - 194
HYDRAULICS
Safety requirements:
active suspension with variable damping195 - 197
Suspension spheres: general specifications 198
Suspension spheres:
specification - identification199 - 200
Depressurising the hydraulic
suspension circuit201 - 202
Angl-C6-Index-2005 4/02/05 17:10 Page IV

Downloaded from www.Manualslib.com manuals search engine 9
GENERAL
GENERAL SPECIFICATION: TOWING THE VEHICLE
WARNING: When the engine is not running,
steering and braking are no longer power-assisted.
Open the boot.
Lift the boot floor plate.
Towing eye.
The towing eye (1)is to be found in the vehicle
toolkit (2)stowed in the spare wheel.
Front of the vehicle.
Open the flap (3).
Screw in the towing eye (1).
Rear of the vehicle.
Open the flap (4).
Screw in the towing eye (1).
E2AP02RD
Front towingRear towing
E2AP02SDE2AP02TD
Angl-C6-page001-21-2005 4/02/05 17:12 Page 9

Downloaded from www.Manualslib.com manuals search engine 19
GENERAL
LUBRICANTS - TOTAL recommended oils
Gearbox oil
Engine coolant
All countriesCITROËN fluid
Protection: -35C°2Litres
5Litres
20 Litres
210Litres9979 70
9979 71
9979 76
9979 779979 72
9979 73
9979 74
9979 75 PacksCITROËN references
REVKOGEL 2000 GLYSANTIN G33 AM6 automatic gearbox All countriesJWS 3309 (ESSO)
Synthetic brake fluidAll countriesCITROËN fluid
1/2Litre
DOT 4 Packs
CITROËN references Power steering oil
Power-assisted steering All countriesLDS TOTAL H50126
Hydraulic circuit
All countriesColour
1Litre
TOTAL FLUIDE LDS Packs
CITROËN references Norm
Orange
Angl-C6-page001-21-2005 4/02/05 17:12 Page 19

Downloaded from www.Manualslib.com manuals search engine 41
ENGINE
ENGINE TIGHTENING TORQUES
Accessories
52 Screw M8 for automatic tensioner roller (accessories drive belt)2,2 ± 0,3
Screw M10 for dynamic tensioner roller (accessories drive belt)4,7 ± 0,7
53 Guide roller 4,7 ± 0,754 Accessories support 2,3 ± 0,355 Multifunction support 2,3 ± 0,356 Power steering pump pulley 2,3 ± 0,357 Power steering pump 2,3 ± 0,358 Alternator screw 5 ± 0,359 Alternator power circuit 1,4 ± 0,260 Aircon compressor screw 2,3 ± 0,3Engine: DT17BTED4
B1BP3C0D
Angl-C6-page022-82-2005 4/02/05 17:19 Page 41

Downloaded from www.Manualslib.com manuals search engine 51
ENGINE
51
CHECKING THE VALVE TIMING
Engine: ES9A
Tools.
[1]Camshaft setting pegs: (-).0187.B
[2]Crankshaft setting peg: (-).0187.A
[3]Fuel pressure take-off union: 4192-T
[4]Belt retaining pin: (-).0187.J
[5]Exhaust camshaft hubs immobilising tool: (-).0187.F
[6]Inlet camshaft hubs immobilising tool: FACOM D12
[7]SEEM belt tension measuring equipment: 4122-T
Remove components as necessary for this operation.
Remove the auxiliaries drive belt (see corresponding operation).
Checking the valve timing.
Remove:
- The power steering pulley.
- The roller/dynamic tensioner assembly (11).
- The crankshaft pulley (12).
- The upper timing covers (9)and (10).
- The lower timing cover (13).
B1BP2BKC
Angl-C6-page022-82-2005 4/02/05 17:19 Page 51

Downloaded from www.Manualslib.com manuals search engine 52
ENGINE
CHECKING THE VALVE TIMING
Engine: ES9A
B1EP15UDB1EP08TC
Checking the valve timing (continued).
Peg the crankshaft, using tool [1].
Check that the tool [2]engages without effort in the cylinder heads at the camshaft pulleys.
Remove the tools [1]and [2].
Refit:
- The lower timing cover (13).
- The upper timing covers (9)and (10).
- The crankshaft pulley (12).
- The roller/dynamic tensioner assembly (11).
- The power steering pulley.
Complete the refitting of components.
Initialise the ignition injection ECU.
Angl-C6-page022-82-2005 4/02/05 17:19 Page 52

Downloaded from www.Manualslib.com manuals search engine 84
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9A
Synopsis.
(15) Canister purge electrovalve
(16)Cooling fan
(17)Pencil type ignition coil (x6)
(18)Petrol injector (x6)
(19)Variable timing electrovalve (x2)
(20)Downstream oxygen sensor (x2)
(21)Upstream oxygen sensor (x2)
(22)Engine coolant temperature sensor
(23)Knock sensor (x2)
(24) Power steering pressure sensor
(25)Integrated pressure sensor
(26)Accelerator pedal position sensor
(27)Inlet air temperature sensor
(28)Diagnostic connector
(29)Ignition injection ECU
B1HP1Z9P
Angl-C6-page83-100-2005 4/02/05 17:22 Page 84

Downloaded from www.Manualslib.com manuals search engine 87
INJECTION
BOSCH ME 7.4.7 INJECTION SYSTEM
Engine: ES9AAir circuit
Component Location Supplier Reference Observations
Integrated pressure sensor 25DS-S2 03-way greyconnector
261 260 140 Integrated in the inlet manifold
Motorised butterfly housing 14DVE56-way blackconnector
BOSCH 0 280 750 041 Fixing, on the inlet manifold
Accelerator pedal 14 43 336-way blackconnector
position sensor26 Supply, 5 volts
Fixing, on the accelerator
Electrical circuit
ME 7.4.7.128-wayconnector
Ignition injection
29 BOSCH0 261 B00 736 Sequential injection
ECU"Flash"type Eprom (reprogrammable eprom)
Installation, in the electronic ECU compartment
280 9112-way blueconnector
Opening of contact at 20 bars
Power steering pressureFor ECU information
sensor 24 BITRON(steering on full lock)
Marking mauve ring seal
Fixing : on the power steering high pressure
pump outlet pipe
Angl-C6-page83-100-2005 4/02/05 17:22 Page 87

Downloaded from www.Manualslib.com manuals search engine 121
AXLES
SUSPENSION
STEERING
WHEEL AND TYRES
Engine plate
Tyre/circumference S
Type
WheelT
A
Name of rim
Normal operating pressure:
front/rear
Pressure for maximum load :
front/rear
Pressure: loaded, high speed:
front/rear
Tyre S
Spare wheel T
Normal operating pressure
Pressure for maximum load
Pressure: loaded, high speed 3.0i 24S 2,7 24V
XFV UHZ
225/55 R17 97W/2,071 m 245/45 R18 100W/2,065m 245/45 R18 100W/2,065m
Michelin PRIMACY
7 J17-CH5-32 8 J18-CH5-33 8 J18-CH5-33
SATURNE SAN MARIN 2 SAN MARIN 2
2,4/2,4 2,4/2,4 2,4/2,4
2,6/2,6 2,4/2,4 2,6/2,6
2,4/2,4 2,4/2,4 2,6/2,6
225/55 R17 97W
7 J17-5-32
2,6 2,4 2,6
2,6 2,4 2,6S =Standard fitting.T =Steel wheel.A=Alloy wheel.
NOTE:The label indicating the recommended tyre pressures is affixed to the front LH door pillar.
Angl-C6-page121-169-2005 4/02/05 17:31 Page 121