key Citroen C6 2007 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2007, Model line: C6, Model: Citroen C6 2007 1.GPages: 216, PDF Size: 7.57 MB
Page 44 of 216

47
II
DO NOT RUN THE ENGINE IN A CLOSED SPACE OR IN ONE THAT IS INSUFFICIENTLY VENTILATED.
PETROL
Starting the engine
Do not touch the accelerator.
Turn the key to the drive position.
Action the starter until the engine starts up (not more than 10 sec- o n d s ) .
If the engine does not start at the fi r s t a t t e m p t , s w i t c h o f f t h e i g n i t i o n . Wait 10 seconds, then action the starter again as above.
DIESEL
Starting the engine
Turn the key to the drive position.
Wait for the preheater warning lamp to go out, if it is on, then action the starter until the engine starts (not m o r e t h a n 1 0 s e c o n d s ) .
If the engine does not start, switch off the ignition.
Recommence the operation.Note: During starting, do not touch the accelerator.
ADVICE
Diesel vehicle with turbo-chargers
Never stop the engine without fi r s t h a v i n g a l l o w e d i t t o i d l e f o r a few seconds, this being the time required for the turbochargers to return to a normal speed.
D o n o t “ fl i c k ” t h e a c c e l e r a t o r a t t h e moment you switch off the ignition as this could seriously damage the turbochargers.
Check that the automatic gear selector is in position P or N.
D R I V I N G –
S T A R T I N G T H E E N G I N E
Page 70 of 216

72
II
A
E L E C T R I C P A R K I N G B R A K E
OPERATION
To park
With the vehicle stationary, operate the parking brake by pulling then releasing the control A.Note:In all circumstances with an automatic gearbox, select the Park position P.
On steep gradients, turn the steering towards the pave-ment.
It is not possible to release the Itelectric parking brake if the key i s r e m o v e d o r i n p o s i t i o n S .
Page 80 of 216

82
III
A
LOCKING/UNLOCKING FROM THE INSIDE
A press on the control A operates the electric central locking and unlocking, provided all the doors are closed.
It is still possible to open the doors from the inside.
Remark: Control A is inactive if the vehicle has been locked using the remote control or the key.
The three statuses for locking/unlocking the vehicle are signalled by the warning lamp on the con-trol A:It fl a s h e s w h e n t h e v e h i c l e i s locked, engine stopped.
It lights up when the ignition is switched on, vehicle locked.It goes out when the vehicle is unlocked.
Page 81 of 216

83
IIIA
A C C E S S
To make it easier to open the doors, the windows automatically open by a few millimetres.Note: This movement occurs immediately you touch an interior door handle.
The window recloses, automati-cally adjusting for a perfect seal.
IMPORTANT
This function has no anti-pinch. Do not leave your hand on the window when you close the door
Any interruption of your vehicle's electrical supply will prevent the windows from opening and closing correctly.
Remark: Travelling at high speed, closing of windows may be hin-dered by the aerodynamic pres-sure. Acoustic comfort may then be adversely affected.
ELECTRICALLY-CONTROLLED CHILD SAFETY
This deactivates the controls in the rear of the vehicle, both for the rear win-dows and for opening the rear doors from the inside.
For Pack Lounge seats, the seat slide adjustments, and those fo r the front seats from the rear of the vehicle, are also deactivated.
Activation
The electric safety device is activated by pressing the control A located on t h e w i n d o w s c o n t r o l p a n e l . A m e s s a g e a p p e a r s t o c o n fi r m t h a t t h e c h i l d safety is activated.
It is still possible to open the doors from the outside and to operate the elec-tric windows from the front of the vehicle.
Before changing or repairing the battery, open all four windows.
If you unlock your vehicle using the key because of a problem with the battery, be aware that opening/closing a door wi th the window closed can seriously damage the glass, even to the point of breaking it.
Page 82 of 216

84
III
A
B
A C C E S S
BOOT
This can be unlocked, vehicle stopped:With either the remote control or the key.
Using the interior central unlock-ing button, or simply by opening a door.
Opening from the outside
Press upwards on the lever A.Note:In all cases, as soon as the vehicle is moving at more than around 10 km / h (6 mph) the boot is locked.
When the vehicle is stationary, the boot unlocks when a door is opened or if the interior cen-tral locking/unlocking button is pressed.
Page 93 of 216

95
III
A
BC
D
R E A R S E A T S
Seat cushion folded.
Stow the head restraints.
Press the control A located at the end of the backrest and fully tilt for-wards.
The benchseat backrest can be folded in two sections. When you reposition the backrest, make sure that it locks in place.
Your vehicle's boot can be kept isolated from the passenger com-partment.
To lock the access to the boot:1. Place the benchseat in its cor-rect position.The red warning lamp on con-trol A should no longer be vis-ible.
2. Insert the ignition key in the lock.3. Lock it.
Before moving the seats
So as to avoid damaging the seat belts by jamming them, take care to keep them to the sides of the backrest.
LOCKING/UNLOCKING OF THE ACCESS INTO THE BOOT VIA THE REAR BENCHSEATREAR CENTRAL SEAT BELT
For easier opening of the seat belt cover D , y o u s h o u l d fi r s t r a i s e t h e central head restraint.
I n s e r t t h e fi r s t f a s t e n i n g C into the f r o n t l e f t h a n d ( b l a c k ) b u c k l e , t h e n insert the second fastening B into the front right hand buckle.
Page 102 of 216

104
III221
2
2
I N T E R I O R L I G H T I N G
Front
INTERIOR LAMPS
1. Interior lamps
A press on button 1 of the front interior lamp, switches the interior lamps on or off.
Switching on and off is progressive after an action on the remote con-trol, but immediate after a press on button 1.
R e a r
2. Spotlamps
A press on one of the buttons 2switches the corresponding spot-lamp on or off.
These only work when the ignition is switched on.
Automatic lighting of the interior lampsThey come on when you remove the ignition key, unlock the vehicle or open a door.
They go out progressively when the doors are closed, the vehicle locked or the ignition switched on.
Deactivation/Activation of automatic lighting
A long press on button 1, deacti-vates the operaton of the inerior lamps. To reactivate them, press on the same button.
Changing bulbsTo change a front interior lamp bulb: Detach the transparent screen. Use a bulb W 5 W.To change a rear interior lamp bulb: Detach the two surrounds of the transparent screen and pull it away. Use a bulb W 5 W.