radio Citroen C6 2008 1.G Owner's Guide

303030
IVThe RDS (Radio Data System) function allows you:to listen to the same station even though you are travelling through different regions (on condition that the transmitters for this station cover the area being travelled through),to listen to traffi c announcement fl ashes on a temporary basisto have the station name displayed, etc.

313131
IV
J
K
Press on the TA / PT Y but ton to activate automatic broadcasting of traffi c announcem-nts.
During broadcasting of traf fi c announce -ments, the sound volume can be adjusted independent ly of t he gener al r adio vol -ume.Rotate the control or press on the controls at the steering wheel J and K to increase or decrease the volume.
The “TA” function lets you switch automati-TATAcally on a temporary basis to an FM station broadcasting road information.The radio station, or the audio source being listened to at that moment, is paused. Once the traffi c information is fi nished, the system switches back to the radio station or audio source initially being listened to.
Press on the TA /PTY button to stop listening to a message being broadcast.
CONDITIONS FOR RECEIVING TRAFFIC ANNOUNCEMENTS
You have to be in FM.The station you are tuned to must confi rm through the RDS system that it broadcasts road information.Stations organised in a network (EON) have regional transmitters sending their own programmes. While listening to one of these stations you can switch to any station on the network that is broadcasting traffi c information messages.

363636
IV
A1
A2
A3
A4
B1
B2
B3
B4
A1A2A3A4
ABC
B1B2B3B4
C
A
B
WHAT ARE THE FUNCTIONS OF THE AUDIO MENU ?
SETTING PARAMETERS FOR RADIO SOURCE
Manually enter the frequency of a station.
Activate or deactivate RDS search.
Activate or deactivate regional search mode.
To activate or deactivate display of the text informa tion broadcast by the station being listened to (name of singer, title of song, etc.).
SETTING PARAMETERS FOR CD AND JUKEBOX SOURCES
Activate or deactivate playback of the start of eac h track of the CD/CD MP3.
Activate or deactivate playback of all the tracks of t he CD or of all the directory of the Jukebox.
Activate or deactivate distribution of the current album or CD-cover.
Activate or deactivate display of the information on the CD (Name of the album, artist, etc.).
COPY OR STOP COPYING A CD OR A CD MP3
A U D I O
S T R U C T U R E O F T H E M E N U ( 1 / 2 )

555555
IX
F R E Q U E N T LY - A S K E D Q U E S T I O N S
QUESTIONSANSWERSSOLUTIONS
There is a discrepancy in sound quality between the different audio sources (radio, CD, CD changer etc.).
To achieve an optimum listening quality, the audio a djustments (Volume, Bass, Treble, Ambiance, Loudness) can be ad apted to each of the dif ferent sound sources, which c an produce audible shif ts when you change the sourc e (radio, C D, CD changer etc.).
Check that the AUDIO adjustments ( Volume, Bass, Treble, Ambiance and Loudness) are adapted to your wishes for each of the audio sources.
The CD immediately ejects.The CD is the wrong way up, is unplayable, does not con tain audio data or contains an audio format that the radio cannot play back.
Check that you have inser ted the CD the right way up in the CD player.
Check the condition of the CD: the CD cannot be played back if it is too damaged.
Check the contents if it is a burnt CD: refer to the advice given in the chapter on Audio System.
For reasons of poor quality, some burnt CDs will not be played back by the audio system.
The CD changer does not play back DVDs.
The CD changer does not play back MP3 CDs.
T h e C D p l a y e r s o u n d i s d o w n -graded.The CD is scratched or of poor quality.Inser t only CDs of good quality and keep them in good condition.
The pre-set stations do not work (no sound, 87,5 Mhz is displayed, etc.).The waveband selected is not the correct one.Press on the BND but ton to retrieve the waveband ( A M , F M1, F M 2 , F M A S T ) w h e r e t h e s t a t i o n s a r e memorised.
Traf fi c A nnouncements ( TA) is dis-played. I do not receive any traffi c infor-mation or public announcements.
The par ticular radio station is not in the regional traf fi c informa-tion network.Change to a radio station that does broadcast traf fi c information.
The table below brings together the answers to the que stions that are the most frequently asked.

565656
IX
F R E Q U E N T LY - A S K E D Q U E S T I O N S
QUESTIONSANSWERSSOLUTIONS
T he rec eption qualit y of the radio station being listened to gradually deteriorates.
The vehicle is too distant from the transmitter, or no transmitter is present in the geographical area you are passing th rough.
Activate the RDS function to allow the system to chec k whether a more power ful transmitter is to be found in the geographical area.
The environment (hills, high buildings, tunnels, underground car parks, etc.) is blocking reception, even in RDS mode.This phenomenon is normal and does not imply anythi ng wrong with the radio.
The aerial is absent or has been damaged (for example after going through a car wash or in an underground car park).Have the aerial checked by a CITROËN dealer.
Cutting of sound for 1 to 2 seconds in radio mode.
The RDS system during this brief sound cut- of f is s earching for a better frequency that might of fer improved reception of the station.
Deactivate the RDS function if the phenomenon occur s too frequently and always on the same journey.
When the engine is not running, the radio stops after a few minutes.
When the engine is switched off, the working time for the radio depends on the batter y charge. The interruption is nor mal: the radio goes into economy mode, cutting off in order to save the vehicle’s batter y.
You have to star t the engine so as to increase the bat-ter y charge.
The message “ the audio system is overheating” appears on the screen.
In order to protect the audio equipment in excessiv e ambient temperatures, the radio goes into an automatic thermic protection mode which results in a reduction in sound volume or stopping of the CD player.
Switch off the audio system for a few minutes in order to allow the system to cool down.
Why is one not informed in real time of a hold-up on the route even though the option for guidance by “traffi c info” is activated ?
When you star t up, the system takes a few minutes to c apture the traf fi c information via RDS-TMC.Wait for the traf fi c information to be safely received (pictogrammes displayed on the map) and make sure that you use the major ar terial roads to have “inform ed” navigation.
Only the major ar terial roads (motor ways and some d ual car-riageways) are featured in RDS-TMC traf fi c information).
It may happen that a hold-up is not repor ted by the tr af fi c info provider.
Why is a diversion not suggested when I have selected traf fi c info ?
Do not confuse the “traf fi c info” guidance option which can sug-gest a diversion (the “diver t” button appears in the w indow) with the menus “Display of traf fi c messages” or “Reading of traf fi c messages” which af fect only the display without recalculating the itinerar y (no “diver t” button in the window).
To have “informed” navigation with the detour proposi-tion, it is essential to activate the guidance option with “traf fi c info”.