warning Citroen C6 DAG 2007 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2007, Model line: C6 DAG, Model: Citroen C6 DAG 2007 1.GPages: 216, PDF Size: 7.61 MB
Page 38 of 216
41
II
R E M O T E C O N T R O L
FOLDING AND EJECTING THE KEY
Button D is for folding and ejecting the key from its housing in the remote control.
If you do not press on button D, you could damage the key mechanism.
Changing the remote control battery
Unclip the cover to gain access to the battery.
Battery: CR 0523 of 3 V.
After a change of battery, it may be necessary to re-initialise t he remote control. To do that, switch on the ignition and immediately action button Bon your remote control to trigger the action desired. This may ta ke some ten seconds.Note: Make a careful note of the numbers for the keys and for the remot e c o n t r o l o n t h e A S S I S T A N C E c a r d . K e e p t h i s i n a s a f e p l a c e .
Do not throw away the old batteries. They should be returned to a C I T R O Ë Ndealer or deposited at a recognised collection point (a camera shop, for e x a m p l e ) .
Except when reinitialising, the remote control cannot function while the key is in the ignition, even when switched off.
Warning: by inadvertently actioning the remote control, when for example it is in your pocket, you can unlock the vehicle without your realising it.
However, if none of the doors is opened within thirty seconds following an unlocking, the doors will automatically relock.
Warning: there is a risk of damage if the replacement batte ry is not the correct one.
O n l y u s e b a t t e r i e s t h a t a r e i d e n t i c a l o r e q u i v a l e n t t o t h o s e a p p r o v e d b y C I T R O Ë N .
GUIDE-ME-HOME LIGHTING
A press on button C operates the guide-me-home lighting (illumina-tion of the sidelamps and dipped b e a m s f o r a p p r o x . o n e m i n u t e ) .
A second press prior to the end of this timing cancels the guide-me-home lighting.
LOCATING OF THE VEHICLE
To locate the vehicle on a carpark, press button B, the interior lamps come on and the direction indica- t o r s fl a s h f o r a f e w s e c o n d s . T h e vehicle remains locked.
Page 43 of 216
46
II
S T E E R I N G L O C K – I G N I T I O N – S T A R T E R
NEVER REMOVE THE IGNITION KEY BEFORE THE ENGINE HAS COME TO A COMPLETE STOP.
IT IS ESSENTIAL ALWAYS TO DRIVE WITH THE ENGINE RUNNING, SO AS TO RETAIN STEERING AND BRAKING ASSISTANCE (risk of the steering lock engaging and loss of safety features).
When stationary, having removed the key, carefully turn the steering wheel if you wish to lock the steering.
S: STEERING LOCK
To unlock the steering, gently move the steering wheel while turning the key, without exerting undue force.
When you remove the key, turn your steering wheel to lock the steering. The key can only be removed when in position S.
M: DRIVE POSITION
The steering is unlocked (by turn-ing the key in position M, if neces- s a r y m o v e t h e s t e e r i n g w h e e l ) .
STARTING AND STOPPING THE ENGINE
See “Driving”.
ECONOMY MODE
In order not to discharge the bat-tery while the engine is stopped, your vehicle goes automatically into economy mode after a max-imum of 30 minutes. Economy mode is indicated by a message on the screen.
The electrical components relating to comfort and also the headlamps (not sidelamps or hazard warning l a m p s ) c u t o u t a u t o m a t i c a l l y . T o reactivate them, it is necessary to start the engine.
Depending on your vehicle ver-sion, the following warning lamps are tested:
If one of these warning lamps does not light up, this indicates a mal-function.
D: STARTING
Release the key as soon as the engine starts. Never turn it while the engine is running.
Page 44 of 216
47
II
DO NOT RUN THE ENGINE IN A CLOSED SPACE OR IN ONE THAT IS INSUFFICIENTLY VENTILATED.
PETROL
Starting the engine
Do not touch the accelerator.
Turn the key to the drive position.
Action the starter until the engine starts u p ( n o t m o r e t h a n 1 0 s e c o n d s ) .
If the engine does not start at the fi r s t a t t e m p t , s w i t c h o f f t h e i g n i t i o n . Wait 10 seconds, then action the starter again as above.
DIESEL
Starting the engine
Turn the key to the drive position.
Wait for the preheater warning lamp to go out, if it is on, then action the starter until the engine starts (not m o r e t h a n 1 0 s e c o n d s ) .
If the engine does not start, switch off the ignition.
Recommence the operation.Note: During starting, do not touch the accelerator.
ADVICE
Diesel vehicle with turbo-chargers
Never stop the engine without fi r s t h a v i n g a l l o w e d i t t o i d l e f o r a few seconds, this being the time required for the turbochargers to return to a normal speed.
D o n o t “ fl i c k ” t h e a c c e l e r a t o r a t t h e moment you switch off the ignition as this could seriously damage the turbochargers.
Check that the automatic gear selector is in position P or N.
D R I V I N G –
S T A R T I N G T H E E N G I N E
Page 45 of 216
48
IISTOP
STOP
0
STOP
STOP
49/54
ADBCA
STST
B
KJIHGFEB
KJIHGFEB
CAB
STST
DA
B
I N S T R U M E N T P A N E L
Remark: Certain types of screen may adversely affect the readability of t he instrument panel.
A Signalling warning lampsB Operational warning lampsC Cruise control/speed limiter informationD Fuel gaugeE Trip mileage recorderF Total mileage recorder, maintenance indicator
G Speed indicatorH Display of automatic gearbox informationI Display of suspension sport modeJ Rev counterK Reset button for trip mileage recorder and mainte-nance indicator
INSTRUMENT PANEL - PETROL VERSION
INSTRUMENT PANEL - DIESEL VERSION
Page 46 of 216
53
II
00
00A
A
I N S T R U M E N T P A N E L
Maintenance intervals
If you use your vehicle in par- t i c u l a r l y d i f fi c u l t c o n d i t i o n s , it is essential to have recourse to the service schedule for “special con-ditions” comprising shorter inter-vals between services. See “Main-tenance Guide”.
Reset to zero
Your CITROËN technician resets the indicator to zero after each service. However, if you do your own servicing, the procedure for resetting to zero is as follows:1. Switch off the ignition.2. Press on button A and keep it pressed.3. Switch on the ignition.4. Keep button A pressed down until the screen indicates “=0” and the maintenance symbol disappears.
Note: If the maximum time between two oil changes is reached before the mileage has been covered, the mainte-nance spanner lights up and the instrument panel indicates “0instrument panel indicates “instrument panel indicates “”.
MILEAGE RECORDER
Display
When the driver's door is opened or the vehicle is unlocked with the remote control, for around 30 sec-onds there is display of the mile-age recorders and sometimes the maintenance spanner.
Trip mileage recorder reset
This can operate when the ignition is switched on.
With a long press on the zero reset button A, the trip mileage dis-played resets to zero.
FUEL GAUGE
If the fuel low warning lamp comes on permanently on horizontal ground, accompanied by a sound signal, there remain around 9 l of f u e l ( p e t r o l v e r s i o n ) o r 8 l of fuel ( D i e s e l v e r s i o n ) .
When the second-to-last bar dis-appears, you still have approx. 5 lof fuel.
REV COUNTER
When you approach maximum engine speed, crossing into the red zone indicates the need to engage a higher gear.
Page 48 of 216
49
II
I N S T R U M E N T P A N E L
W A R N I N G L A M P S
These warning lamps may be accompanied by a message and/or a sound signal
ESP/ASR
Operating
If either of the ESP or ASR systems is active, the warning l a m p fl a s h e s .
For a malfunction
When the vehicle is moving, the lighting of this warning lamp indi-cates a system malfunction.
Contact a CITROËN dealer.
Deactivation
The lighting of the warning lamp and of the button ESP indicates that the system is deactivated.
Electric parking brake
When the engine is run-ning, this warning lamp lights up to indicate a mal-functioning of the electric parking brake. The brake is not working properly. Place the gearbox in the P a r k p o s i t i o n ( P ) .
Consult a CITROËN dealer as soon as possible.
ABS
The ABS warning lamp lights up when you switch on the ignition: it should go out after a few seconds. If it does not go out, there could be a sys-tem malfunction. See “Brakes”.
Puncture(s)
If this warning lamp comes on, it indicates a puncture on one or more wheels.
The screen displays an image which shows you which wheel is affected. Contact a CITROËN which shows you which wheel wheel
dealer.
Door open
If this warning lamp comes on while the engine is run-ning, it tells you that one of the doors and/or the boot is open.
Electric parking brake, b r a k e fl u i d l e v e l , b r a k -ing distribution mal-function
With the engine running, the light-ing of this warning lamp indicates that the parking brake is on or not properly released, that the brake fl u i d l e v e l i s l o w o r t h a t t h e b r a k i n g system is malfunctioning.
If the warning lamp remains on even after you have released the parking brake, stop immediately and contact a CITROËN dealer.parking brake, stop immediately stop immediately
See “Brakes”.
SERVICE
This warning lamp remains on for a serious fault. Con-sult a CITROËN dealer as soon as possible.
This warning lamp remains on only for a short time for faults that are minor. Contact a CITROËN dealer if necessary.
To learn the origin of the corre-sponding alert, refer to the log of alerts (See chapter “Multifunction screen” or your NaviDrive instruc- t i o n s ) .
STOP warning lamp
If this warning lamp comes on, it is imperative to stop the vehicle and to switch the engine off. The warn-ing lamp is accompanied by the STOP symbol on the screen as well as on the Head-up display.
Contact a CITROËN dealer as soon as possible.
Page 49 of 216
50
II
I N S T R U M E N T P A N E L
W A R N I N G L A M P S
Front passenger's air-bag deactivation
See “Airbags”.
Left hand direction indicator
See “Signalling”.
Right hand direction indicator
See “Signalling”.
If the hazard lamps are activated, this means that the direction indica- t o r s fl a s h o n b o t h s i d e s a t t h e s a m e t i m e .
Sidelamps
See “Signalling”.
Front foglamps
See “Signalling”.
Dipped beams
I f t h i s w a r n i n g l a m p fl a s h e s , it indicates that the direc-tional headlamps are mal-functioning.
Contact a CITROËN dealer.
Foglamps (rear)
See “Signalling”.
Main beams
See “Signalling”.
Driver's seat belt not fastened
If this warning lamp comes on, it is reminding the driver to fasten his seat belt. While the vehicle is stationary it remains on until the belt is fastened.
See “Seat belt not fastened warn-ing lamp”.
Depollution system
I f t h i s w a r n i n g l a m p fl a s h e s or lights up while you are driving, this indicates a problem with the depollution sys-tem.
Consult a CITROËN dealer as soon as possible.
Diesel engine preheater
See method for starting the engine.
See “Driving”.
Fuel low
If this warning lamp comes on, permanently on level ground, there remain around 9 l of fuel for a Petrol vehi-cle, or around 8 l of fuel for a Die-sel vehicle.
Diesel preheating
Page 51 of 216
52
II
I N S T R U M E N T P A N E L
MAINTENANCE INDICATOR
It informs you when the next routine service is due in accordance with the vehicle servicing schedule in the Main-tenance Guide. This information is dependent on two parameters: the mileage covered, and the time elapsed since the last visit.
Operation
From switching on the ignition and for a few seconds, the span-ner symbolising maintenance operations lights up ; the instru-ment panel tells you the distance remaining to the next service.
Example: there remain up to the next service:
A few seconds after this, the engine oil level indicator is displayed, then the total mileage recorder resumes its normal role. The instrument panel gives the total and trip mile-ages.
Operation if the distance to the next service is less than 1 000 km (600 miles)
Each time you switch on the igni-tion and for 5 seconds, the span- n e r a n d t h e d i s t a n c e fl a s h .
Example: there remain up to the n e x t s e r v i c e : 5 0 0 k m ( 3 0 0 m i l e s ) . On switching on the ignition and for 5 seconds, the instrument panel indicates:
A few seconds after this, the engine oil level indicator is displayed, then the total mileage recorder resumes its normal role and the mainte-nance symbol remains lit up.
This is a warning to you that a service must be carried out at the earliest opportunity.
The instrument panel gives the total and trip mileages.
Operation if the service interval has been passed
Each time you switch on the igni-tion, the maintenance symbol and the distance covered (preceded b y a m i n u s ) b e y o n d t h e r e c o m - m e n d e d i n t e r v a l fl a s h .
Example: You have exceeded the s e r v i c e i n t e r v a l b y 3 0 0 k m ( 3 0 0 m i l e s ) .
The routine service on your vehi-cle needs to be carried as soon as possible.
A few seconds after switching on the ignition, the total mile-age recorder resumes its normal role and the maintenance symbol remains lit up.
Page 53 of 216
56
II
CB
DG
FE
A
H E A D - U P D I S P L A Y
CONTENT OF THE HEAD-UP DISPLAYA “Fuel low” alertB “STOP” warning lampC “ESP” warning lampD Navigation instructionsE “SERVICE” warning lampF Main beams warning lampG Vehicle speed
T o b e a w a r e o f t h e s i g n i fi c a n c e o f the information projected on the screen, see “Warning lamps”.
Remark: when navigation is in operation, direction arrows will fl a s h . S e e N a v i D r i v e i n s t r u c t i o n s .
To suspend display of a cer-tain type of information:Press button 4.
Rotate the control 1 to select the type of information you wish to suspend.Press button 1.
T h e i n f o r m a t i o n fl a s h e s ; i t w i l l n o longer be displayed.
To quit the selection mode, press button 4.Note: The vehicle speed informa-tion, the “STOPthe “the “” warning lamp and the “ESPthe “the “” warning lamp cannot be suspended.
To restore display of a type of information:Press button 4.Rotate the control to select the information you wish to restore, w h i c h fl a s h e s .
Press button 1.
T h e i n f o r m a t i o n s t o p s fl a s h i n g : i t will be displayed.
To quit the selection mode, press button 4.
Page 61 of 216
64
II
T R I P C O M P U T E R
This gauge informs you of the temperature of the oil in your engine.
OIL TEMPERATURE (NAVIDRIVE COLOUR DISPLAY)
If the temperature is too high, the gauge indicates the maximum l e v e l a n d t h e l a s t , r e d b a r fl a s h e s .
Contact a CITROËN dealer.
This gauge informs you of the temperature of the c o o l a n t fl u i d i n y o u r e n g i n e .
If the temperature is excessive, the gauge indicates a maximum level, the “STOP” warning lamp comes on in the instrument panel as well as on the Head-Up display.
Stop and contact a CITROËN dealer.
COOLANT TEMPERATURE
Colour screen CNaviDrive colour display