boot Citroen C6 DAG 2007 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2007, Model line: C6 DAG, Model: Citroen C6 DAG 2007 1.GPages: 216, PDF Size: 7.61 MB
Page 39 of 216
42
II
K E Y S
It is dangerous to operate the deadlocking when a person is in the vehicle as unlocking is impossible from the inside (without the remote control).
The key number is on the label attached to the key.
S h o u l d y o u l o s e y o u r k e y o r r e m o t e c o n t r o l , a C I T R O Ë N d e a l e r c a n s u p p l y r e p l a c e m e n t s .
If you unlock your vehicle using the key because of a problem with the battery, be aware that opening/closing a door with the window closed can ser iously damage the glass, even to the point of breaking it. See “Access”.
ELECTRONIC IMMOBILISER KEY
The key operates all the vehicle’s locks as well as the ignition.Note: For safety reasons, a buzzer will sound if you have switched off the ignition and opened the driv-er’s door without having removed the ignition key.
The key can be used to deactivate the front passenger’s airbag. See “Airbags”.
CENTRAL LOCKING USING THE KEY
A brief action with the key locks the vehicle.
Deadlocking: Central locking using the key
A second action straightaway with the key deadlocks the vehicle. It is then impossible to open the doors from either inside or outside the vehicle.Note:With the vehicle stationary and the engine switched off, locking is sig- n a l l e d b y t h e fl a s h i n g o f t h e i n t e r i o r l o c k i n g c o n t r o l w a r n i n g l a m p .If any of the doors, or the boot, is open or not properly closed , the central Iflocking does not operate.
ELECTRONIC IMMOBILISER
The ELECTRONIC IMMOBILISER device locks the engine supply system.
The system activates automatically as the key is removed from the igni tion.
All the vehicle’s keys contain an electronic immobiliser device.
After you switch on the ignition, a dialogue starts between the key and the electronic immobiliser device.
If the key is not recognised, you cannot start the vehicle .
If this occurs, leave your vehicle immobilised and contact a CITRO ËN dealer.
Page 41 of 216
44
II
A
1
A N T I - I N T R U S I O N A L A R M
Your vehicle may be equipped with an ANTI-INTRUSION ALARM. This provides:Exterior perimeter protection by Exteriormeans of detectors on the vehi-cle access points (doors, boot, b o n n e t ) a s w e l l a s o n t h e e l e c -trical supply.
Interior volumetric protection Interiorby means of ultrasonic sensors (detecting movement inside the p a s s e n g e r c o m p a r t m e n t ) . T h i s can be deactivated using the control 1.
Page 42 of 216
45
II
AB
A N T I - I N T R U S I O N A L A R M
OPERATING THE ALARM
First make sure all the doors are closed.
The alarm is armed by pressing button B on the remote control.
With the alarm armed, the protections are active after 5 s e c o n d s ( p e r i m e t e r ) a n d 4 5 s e c o n d s ( v o l u m e t r i c ) .
W h e n t h e a l a r m i s a r m e d ( o n s t a n d b y ) , a n y i n t r u s i o n will trigger the siren for 30 seconds, accompanied by the direction indicators lighting up.
The alarm then goes back on standby, but the trigger-ing remains memorised and is signalled by the rapid fl a s h i n g o f t h e w a r n i n g l a m p o n c o n t r o l 1 after you have deactivated the alarm with a press on the unlocking button A . T h e fl a s h i n g s t o p s w h e n y o u s w i t c h o n t h e ignition.
The siren is also triggered if there is a cutting of the electrical supply. To stop it, restore the electrical supply then press on the unlocking button A.Note:If you want to lock your vehicle without arming the Ifalarm, just lock with the key only.
If you lock your vehicle and a door, or the boot, is still Ifopen, the central locking does not operate but the alarm will arm itself after approx. 45 seconds.Note: The siren is automatically deactivated (for exam-ple for disconnecting the battery) as soon as the vehicle is unlocked using the remote control.
Page 48 of 216
49
II
I N S T R U M E N T P A N E L
W A R N I N G L A M P S
These warning lamps may be accompanied by a message and/or a sound signal
ESP/ASR
Operating
If either of the ESP or ASR systems is active, the warning l a m p fl a s h e s .
For a malfunction
When the vehicle is moving, the lighting of this warning lamp indi-cates a system malfunction.
Contact a CITROËN dealer.
Deactivation
The lighting of the warning lamp and of the button ESP indicates that the system is deactivated.
Electric parking brake
When the engine is run-ning, this warning lamp lights up to indicate a mal-functioning of the electric parking brake. The brake is not working properly. Place the gearbox in the P a r k p o s i t i o n ( P ) .
Consult a CITROËN dealer as soon as possible.
ABS
The ABS warning lamp lights up when you switch on the ignition: it should go out after a few seconds. If it does not go out, there could be a sys-tem malfunction. See “Brakes”.
Puncture(s)
If this warning lamp comes on, it indicates a puncture on one or more wheels.
The screen displays an image which shows you which wheel is affected. Contact a CITROËN which shows you which wheel wheel
dealer.
Door open
If this warning lamp comes on while the engine is run-ning, it tells you that one of the doors and/or the boot is open.
Electric parking brake, b r a k e fl u i d l e v e l , b r a k -ing distribution mal-function
With the engine running, the light-ing of this warning lamp indicates that the parking brake is on or not properly released, that the brake fl u i d l e v e l i s l o w o r t h a t t h e b r a k i n g system is malfunctioning.
If the warning lamp remains on even after you have released the parking brake, stop immediately and contact a CITROËN dealer.parking brake, stop immediately stop immediately
See “Brakes”.
SERVICE
This warning lamp remains on for a serious fault. Con-sult a CITROËN dealer as soon as possible.
This warning lamp remains on only for a short time for faults that are minor. Contact a CITROËN dealer if necessary.
To learn the origin of the corre-sponding alert, refer to the log of alerts (See chapter “Multifunction screen” or your NaviDrive instruc- t i o n s ) .
STOP warning lamp
If this warning lamp comes on, it is imperative to stop the vehicle and to switch the engine off. The warn-ing lamp is accompanied by the STOP symbol on the screen as well as on the Head-up display.
Contact a CITROËN dealer as soon as possible.
Page 63 of 216
66
II
T R I P C O M P U T E R
T y r e d e fl a t i o n a l e r t
The SERVICE warning lamp comes on and a vehicle outline is displayed.
T h e l o c a t i o n o f t h e w h e e l ( s ) c o n c e r n e d i s c l e a r f r o m t h e v e h i c l e o u t l i n e , o n w h i c h t h e a f f e c t e d w h e e l ( s ) w i l l b e fl a s h -ing. Check the tyre pressures as soon as possible.
Colour screen CNaviDrive colour display
T y r e v e r y d e fl a t e d
T y r e d e fl a t e d
Stop immediately, avoiding any sudden actions with the steering wheel or the brakes.
C h a n g e t h e w h e e l w i t h t h e a f f e c t e d t y r e ( w h e t h e r p u n c t u r e d o r v e r y d e fl a t e d ) , t h e n h a v e t h e t y r e r e p a i r e d a n d all the pressures checked at the earliest opportunity.
The wheel with a damaged tyre (either in the boot or under repair) can no longer be detected (information given by the vehicle outline or by a message) nor is the spare wheel able to be detected.
Puncture
The “STOP” a n d t y r e ( s ) p u n c t u r e d w a r n i n g l a m p s l i g h t u p , a n d a v e h i c l e o u t l i n e i s d i s p l a y e d . T h e l o c a t i o n o f t h e w h e e l ( s ) c o n c e r n e d i s c l e a r f r o m t h e v e h i c l e o u t l i n e , o n w h i c h t h e a f f e c t e d w h e e l ( s ) w i l l b e fl a s h i n g .
Colour screen CNaviDrive colour display
Page 82 of 216
84
III
A
B
A C C E S S
BOOT
This can be unlocked, vehicle stopped:With either the remote control or the key.
Using the interior central unlock-ing button, or simply by opening a door.
Opening from the outside
Press upwards on the lever A.Note:In any event, as soon as the vehicle is moving at more than around 10 km / h (6 mph), the boot is locked.
When the vehicle is stationary, the boot unlocks when a door is opened or if the interior cen-tral locking/unlocking button is pressed.
Page 84 of 216
86
III
A U T O M A T I C A I R C O N D I T I O N I N G
AIR CONDITIONING
This system automatically adjusts the temperature, the fl o w o f a i r a n d t h e d i s t r i b u t i o n o f a i r i n s i d e t h e c a b i n , depending on your desired comfort level.
Provided you retain automatic mode (by pressing button “AUTO ” ) a n d a l l t h e a i r v e n t s a r e o p e n , y o u w i l l m a i n -tain an optimum comfort level, also removing humidity and misting, whatever the ambient climatic conditions.
The temperature inside the cabin cannot be lower than the temperature outside if the air conditioning is not operating.
To be effective, the air conditioning should only be used with the windows closed. If after a lengthy stop in bright sunlight the interior temperature is excessive, air the passenger compartment by opening the windows for a few moments, then close them again.
To keep the air conditioning compressor well sealed, it is essential to operate the air conditioning at least once in every month.
The air conditioning operates by using power from the engine. This results in a slight increase in fuel con-sumption.
Sensors
The automatic regulation of the air conditioning inside the cabin uses a number of sensors (sunlight, ambient t e m p e r a t u r e , i n s i d e t e m p e r a t u r e , e t c . ) r e l i e v i n g y o u o f the need to make your own adjustments within a normal temperature range.
The humidity sensor is there to prevent misting inside the vehicle.
Be careful not to obstruct the sensors A and C.
Air inlet
Check that the exterior grille for the air inlet, at the bot-tom of the windscreen, is clean and free of dead leaves, snow, etc.
If washing the vehicle with a high pressure jet, avoid targeting the air inlet zone.
Air circulation
For your comfort we advise you to maintain a proper distribution of air within the cabin, both at the front and at the rear.
The air vents to the face have thumbwheels so that you c a n a d j u s t t h e fl o w o f a i r , a n d g r i l l e s t o o r i e n t t h e d i r e c -tion.
T h e r e a r e a i r v e n t s o n t h e fl o o r u n d e r n e a t h t h e f r o n t seats and on the rear control panel, for enhanced heat-ing of the rear seat positions.
Do not obstruct the air outlets located in the boot area.
D u s t / p o l l e n fi l t e r
T h e r e i s a fi l t e r f o r e x c l u d i n g p o l l e n a n d d u s t .
T h i s fi l t e r h a s t o b e c h a n g e d a c c o r d i n g t o t h e v e h i c l e maintenance schedule. See “Maintenance Guide”.
Additional heating
Vehicles with an HDi engine may be provided with auto-matic additional heating for enhanced comfort.
It is normal to notice slight odours or smoke emissions, especially when the vehicle is idling or stationary.
Page 93 of 216
95
III
A
BC
D
R E A R S E A T S
Seat cushion folded.
Stow the head restraints.
Press the control A located at the end of the backrest and fully tilt for-wards.
The benchseat backrest can be folded in two sections. When you reposition the backrest, make sure that it locks in place.
Your vehicle's boot can be kept isolated from the passenger com-partment.
To lock the access to the boot:1. Place the benchseat in its cor-rect position.The red warning lamp on con-trol A should no longer be vis-ible.
2. Insert the ignition key in the lock.3. Lock it.
Before moving the seats
So as to avoid damaging the seat belts by jamming them, take care to keep them to the sides of the backrest.
LOCKING/UNLOCKING OF THE ACCESS INTO THE BOOT VIA THE REAR BENCHSEATREAR CENTRAL SEAT BELT
For easier opening of the seat belt cover D , y o u s h o u l d fi r s t r a i s e t h e central head restraint.
I n s e r t t h e fi r s t f a s t e n i n g C into the f r o n t l e f t h a n d ( b l a c k ) b u c k l e , t h e n insert the second fastening B into the front right hand buckle.
Page 110 of 216
112
III
5
4
4
1
3
2
6
1 P u l l s t r a p ( s p a r e w h e e l s t o w a g e ) .2 Boot lamp.To change the bulb, detach the cover and use a bulb W 5 W.
3 Elastic straps.4 1 2 V a c c e s s o r i e s s o c k e t ( f u n c t i o n s w i t h t h e i g n i t i o n s w i t c h e d o n ) .5 Boot lateral net.6 Changer for 6 CDs.
B O O T
Page 122 of 216
124
IV
CD CHANGER
This equipment S ( i f p r e s e n t ) i s l o c a t e d in the vehicle boot and comprises a magazine that holds up to 6 CDs.
TO INSERT/REMOVE A CD1. Remove the magazine from the CD changerOpen the sliding door of the CD changer.Press on the “EJECT” button to eject the magazine partially.
Remove the magazine carefully.
Close the sliding door.2. Removing a compartmentTake out just one drawer at a time.
3. Inserting/removing a CDInsert a single CD, printed side sertupwards. Otherwise the CD changer will not operate.
Pull out the CD by pulling on the part that is showing.
4. Repositioning the compartment R e fi t t h e d r a w e r b y p u s h i n g i t i n t o the magazine. Do not push directly on the CD.
5. Repositioning the magazineOpen the sliding door.
Hold the magazine, narrow side towards the opening of the CD changer.
Push the magazine gently into the aperture of the changer until there is a click.
Reclose the sliding door to prevent entry of dust or of foreign bodies.