language Citroen C8 2008 1.G Owner's Manual
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2008, Model line: C8, Model: Citroen C8 2008 1.GPages: 194, PDF Size: 4.97 MB
Page 28 of 194
33
II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
Main menu
Press control
A to display the
“Main menu” for the multifunction
screen. Using this menu, you have
a c c e s s t o t h e f o l l o w i n g f u n c t i o n s :
The driver is advised not to
manipulate the controls described
b e l o w w h i l e d r i v i n g .
1 -
Time.
2 - Ambient temperature
3 - Date and Display zone
If the outside temperature is
b e t w e e n + 3 ° C a n d - 3 ° C , t h e
t e m p e r a t u r e d i s p l a y l a s h e s ( r i s k
of ice).
Note: The outside temperature
displayed may be higher than the
actual temperature if the vehicle is
standing in bright sunshine.
Radio-CD
(See radio-CD handbook)Trip computer, giving
you:
- Distance to your
destination.
- Access to log of alerts (list of the alerts that have been previously
signalled).
- Access to the status of functions, for example activation/
deactivation of automatic
headlamp lighting, daytime-
r u n n i n g l a m p s , E S P , w i n d s c r e e n
w i p e .
Personalisation -
C o n i g u r a t i o n , a l l o w i n g
you to activate or
deactivate:
- t h e t r i g g e r i n g o f r e a r w i p e
- the automatic guide-me-home lighting
- the automatic lighting of hea- dlamps
- automatic lighting of daytime- running lamps
Also to choose:
- Brightness, the time, the date, units.
- The display language.
Note : activation/deactivation of
automatic lighting of daytime-run-
ning lamps is available depending
on the country of marketing.
Controls
A
- Access to the “Main menu”
B - Scrolling in the display
menus.
C - Validation and Selection in
the menus, of the function
c h o s e n o r v a l u e m o d i i e d
D - Cancellation of the operation
or return to the previous
display.
E - Selection of the type of
i n f o r m a t i o n y o u w i s h t o s e e
permanently displayed (date,
radio-CD, trip computer) on
the right of the screen
Page 30 of 194
35
II
M U L T I F U N C T I O N D I S P L A Y
D i s p l a y C
To adjust the date and the time:
- Press on
A.
- Use B to select the icon
“ P e r s o n a l i s a t i o n - C o n i g u r a t i o n ”
t h e n c o n i r m y o u r c h o i c e w i t h a
press on C.
- S e l e c t t h e d i s p l a y c o n i g u r a t i o n using B . C o n i r m w i t h a p r e s s
on C.
- Select the date and time adjustment, using B, then
c o n i r m w i t h a p r e s s o n C.
- Use B to select the values to be
m o d i i e d . C o n i r m w i t h a p r e s s
on C.
- Make your adjustments using B,
v a l i d a t i n g e a c h a d j u s t m e n t w i t h
a press on C.
- Validate on “OK” on the display. To choose units:
- Press on
A.
- Use B to select the icon
“ P e r s o n a l i s a t i o n - C o n i g u r a t i o n ”
t h e n c o n i r m y o u r c h o i c e w i t h a
press on C.
- S e l e c t t h e d i s p l a y c o n i g u r a t i o n using B . C o n i r m w i t h a p r e s s
on C.
- Then select the sub-menu for U n i t s . C o n i r m w i t h a p r e s s
on C.
- Using B, select the unit to
b e m o d i i e d ( T e m p e r a t u r e o r
C o n s u m p t i o n ) t h e n v a l i d a t e w i t h
a press on C.
- Validate on “OK” on the display.
Note: This choice concerns all
the types of information (fuel
consumption, speed, etc.) that
appear on the displays.
To choose the language:
- Press on A.
- Use B to select the icon
“ P e r s o n a l i s a t i o n - C o n i g u r a t i o n ”
t h e n c o n i r m y o u r c h o i c e w i t h a
press on C.
- Select the choice of language, using B.
- Using B, select the desired
language and validate your
c h o i c e w i t h a p r e s s o n C.
- Validate on “OK” on the display.
To adjust the display
brightness:
- Press on
A.
- Use B to select the icon
“ P e r s o n a l i s a t i o n - C o n i g u r a t i o n ”
t h e n c o n i r m y o u r c h o i c e w i t h a
press on C.
- S e l e c t t h e d i s p l a y c o n i g u r a t i o n using B . C o n i r m w i t h a p r e s s
on C.
- Select the adjustment of b r i g h t n e s s . C o n i r m w i t h a p r e s s
on C.
- Use B to select normal or other
display mode, then validate
w i t h a p r e s s o n C. To adjust
the brightness, select the
symbols “+” or “-” a n d c o n i r m
y o u r a d j u s t m e n t w i t h a p r e s s
on C.
- Validate on “OK” on the display.
Page 113 of 194
11 IV
After a lengthy disconnection of the battery, it may be necessa
ry to reinitialise the following functions:
- the electric windows anti-pinch and sequential systems,
- the sun roof anti-pinch system,
- the multifunction display parameters (date, time, language, units of distance and temperature),
- the radio stations,
- the navigation reception (see NaviDrive instructions).
W A R N I N G : i f d i s c o n n e c t i n g t h e b a t t e r y , c h e c k t h a t t h e n a v i g a t i o n r e a d e r h a s i n i s h e d r e c o r d i n g i n f o r m a t i o n
after switching off the ignition : the warning lamp should h ave gone out.
S t a r t i n g t h e e n g i n e f o r t h e i r s t t i m e a f t e r d i s c o n n e c t i n g a n d
connecting the battery
- Turn the ignition key.
- Wait about a minute before operating the starter to allo
w the electronic
systems to be reinitialised. B A T T E R Y
Page 147 of 194
99
M A I N M E N U
To keep the display clean, it is recommended to wipe with a soft, non-abrasive cloth (e.g. for spectacles) without any cleaning product added.
HOW TO ACCESS THE MAIN MENU ?
Press on the MENU button.
TR AFFIC INFORMATION: TMC in-formation, messages, etc
AUDIO: radio, CD, Jukebox source , options, etc
T E L E M A T I C S : t e l e p h o n e , directory, SIM, services, etc
CONFIGUR ATION: vehicle param-eters, display, time, languages, voice, auxiliary socket, etc
VIDEO: activation, parameters, etc
VEHICLE DIAGNOSIS: log of alerts, etc
NAVIGATION - GUIDANCE: GPS, stages, options, etc
M AP: or ientation, details, display, etc
Page 161 of 194
232323
III T M C t r a f fi c i n f o r m a t i o n c o n s i s t s o f m e s s a g e s transmitted by FM radio stations. A s o p p o s e d t o t h e r o a d i n f o r m a t i o n fl a s h e s b r o a d c a s t b y r a d i o ( T A ) , T M C ( T r a f fi c M e s -sage Channel) messages are coded and s i l e n t . Y o u c a n fi l t e r t h e t y p e s o f i n f o r m a t i o n that interest you.Your NaviDrive issues messages written in the selected language (including in a foreign country where your language is not that of the local radio stations).The messages contain:The date and the time of the broadcastthe nature of the incidentthe locationthe namet h e d i r e c t i o n o f t r a f f i c o n t h e a r t e r y concerned.A message is sent when an event occurs. You are again informed of the event when you are coming into proximity. The messages are classed according to the distance of the event from your vehicle.The list of messages is updated every 15 minutes approximately.
Page 189 of 194
515151
VI
A1A2A3
ABCD
A1
A2
A3
B2
D1D2
D1
A4
B1B2B3
D2
A4
B1
B3
C
A
B
D
D3D3
C O N F I G U R A T I O N
A C C E S S I N G T H E M E N U - S T R U C T U R E
T h e C o n fi g u r a t i o n m e n u e n a b l e s y o u t o p r o g r a m m e y o u r N a v i D r i v e as well as certain functions of your vehicle.
WHAT ARE THE FUNCTIONS OF THE CONFIGURATION MENU ?
CONFIGURING THE DISPLAY OF YOUR NAVIDRIVE
Choose the colour of the display.
Adjust the brightness of the display.
A d j u s t t h e d a t e a n d t h e t i m e a n d d e fi n e t h e f o r m a t 1 2 H o r 2 4 H .
Choose a feminine voice or a masculine voice and adj ust the voice synthesiser volume.
CONFIGURE THE VOICE OF YOUR NAVI DRIVE
CHOOSE THE LANGUAGE OF THE VOICE SYNTHESISER AND OF THE DISPLAY
Activate or deactivate the automatic lighting of head lamps and/or guide-me-home lighting.
DEFINE THE VEHICLE PARAMETERS (ACCORDING TO EQUIPMENT )DEFINE THE V THE
Choose system of measurement: metric or imperial.
Activate or deactivate the voice commands.
Activate or deactivate the audio/video auxiliary inpu t.
Activate or deactivate the automatic triggering of th e rear wiper when you engage reverse gear.
HOW TO ACCESS THE CONFIGURATION MENU ?
Press button MENU. R o t a t e t h e c o n t r o l t o s e l e c t t h e C o n fi g u r a t i o n i c o n .Press on the control to validate.