light Citroen DS3 2014 1.G User Guide

53
DS3_en_Chap02_ecrans-multifonction_ed01-2014
"Personalisation-
con
figuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility" section),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o the " Visibility" section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he "Safety" section, under "
ac
tive City
Brake").
Multifunction screens

57
DS3_en_Chap02_ecrans-multifonction_ed01-2014
Vehicle parameters
This menu allows you to activate or deactivate certain   driving   and   comfort   systems,   arranged  
b

y
 c
ategory:
-
"Parking sensors "
 R

efer   to   the   "Driving"   section.
-
"Operation of rear wiper "
●
 
"R

ear wiper in reverse: O " (Rear wiper
coupled
  to   reverse   gear)
 R

efer   to   the   " Visibility"   section.
-
"Lighting configuration "
●
 
"duration of guide-me-home lighting: O "
(Automatic   guide-me-home   lighting)
 Refer  to   the   " Visibility"   section.
-

"dr iving assistance "
●
 
"A

utomatic emergency braking: OFF "
(Active
  City   Brake)
 R

efer   to   the   "Safety"   section.
●
 
"I

nitialisation of under-inflation "
(Reinitialisation of the tyre under-
inflation
  detection   system)
 R

efer   to   the   "Safety"   section.
Trip computer
This menu allows you to view information on   the   state   of   the   vehicle.   You   can   choose  
b

etween   the   following   functions:
-
"Aler t log ".
 L

ist   of   active   alerts.
-
"State of functions "
L

ist of the state of functions (activated,
deactivated or faulty)
For
  safety   reasons,   configuration   of   the  
s

creen   by   the   driver   must   only   be   done  
w

hen   stationary.
Multifunction screens

61
DS3_en_Chap03_ouvertures_ed01-2014
Locking the vehicle
Locking using the remote control
Locking is confirmed by fixed lighting of the   direction   indicators   for   approximately  
t

wo   seconds.
According
  to   version,   the   door   mirrors   fold   at  
t

he   same   time.F
 
P
ress   the   closed   padlock   to   lock  
t

he   vehicle.
If one of the doors or the boot is still
open,   the   central   locking   does   not   take  
p

lace.
When   the   vehicle   is   locked,   if   it   is  
u

nlocked   inadvertently,   it   will   relock  
a

utomatically   after   thirty   seconds  
u

nless   a   door   or   the   boot   is   open.
The   folding   and   unfolding   of   the   door  
m

irrors   using   the   remote   control   can   be  
d

eactivated by a CITR
oË
N dealer or a
qualified
 w

orkshop.
Folding the key
F First  press   this   button   to   fold   the   key.
Locking using the key
F Turn  the   key   to   the   right   in   the   driver's   door  l
ock   to   lock   the   vehicle   completely.
If you do not press the button when
folding
  the   key,   there   is   a   risk   of  
d

amage   to   the   mechanism.
Access

DS3_en_Chap03_ouvertures_ed01-2014
This is indicated by lighting of the courtesy lamps   and   flashing   of   the   direction   indicators  
f

or   a   few   seconds.
Locating your vehicle
F Press   the   closed   padlock   to  l
ocate   your   locked   vehicle   in   a  
c

ar
 par
k.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   minutes  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.-
 
P
osition   1:   Stop
-
 
P
osition   2:   Ignition
-
 
P
osition   3:   Starting
Ignition switch
keep safely the label attached to
the keys  given   to   you   on   acquisition   of  
t

he   vehicle.

DS3_en_Chap03_ouvertures_ed01-2014
Following disconnection of the vehicle battery, replacement   of   the   remote   control   battery   or  
i

n   the   event   of   a   remote   control   malfunction,  
y

ou   can   no   longer   unlock,   lock   or   locate  
y

our vehicle.
F
 
F
irst   of   all,   use   the   key   in   the   lock   to   unlock  
o

r   lock   your   vehicle.
F
 
T
hen,   reinitialise   the   remote   control.
If
  the   problem   persists,   contact   a   CITROËN  
d

ealer   as   soon   as   possible.
Remote control problem
Reinitialisation
F Switch  off   the   ignition.
F  T urn   the   key   to   position   2 (Ignition).
F
 
P
ress   the   closed   padlock   immediately   for   a  
f

ew   seconds.
F
 
S
witch   off   the   ignition   and   remove   the   key  
f

rom   the   ignition   switch.
The
  remote   control   is   fully   operational   again.
changing the battery
Battery ref.: CR1620 / 3 volts.F  U nclip   the   casing   by   inserting   a   coin   at   the  
n

otch   and   rotating.
F
 
S
lide   the   flat   battery   out   of   its   location.
F

S
lide the new battery into its location
observing
  the   original   direction.
F
 
C
lip   the   casing   in   place,   then   the   chrome  
f

inisher.
F
 
R
einitialise   the   remote   control.
If the battery is flat, you are
informed
  by   lighting   of   this   warning  
l

amp   in   the   instrument   panel,   an   audible   signal  
a

nd   a   message   in   the   multifunction   screen.
F
 
U
nfold   the   key.
F
 
R
elease   the   chrome   finisher   by   pressing  
on
  lug   A.
F
 
M
aintain   pressure   on   lug   A   and   remove   the  
c

hrome   finisher   by   sliding   it   off   at   45°.

DS3_en_Chap04_confort_ed01-2014
These have one position for use (up) and a
stowed  position   (down).
They
  can   also   be   removed.
To
  remove   a   head   restraint:
F
 
r
elease   the   backrest   using   control   1,
F
 
t
ilt   the   backrest   2   slightly   for wards,
F

p
ull the head restraint upwards to the stop,
F
 
t
hen,   press   the   lug   A.
Rear head restraints
Never drive with the head restraints
removed;
  they   must   be   in   place   and  
c

orrectly
 adj
usted.
Steering wheel ad justment
F When stationary , pull the control lever to
release   the   adjustment   mechanism.
F
 
A
djust   the   height   and   reach   to   suit   your  
d

riving   position.
F
 
P
ush   the   control   lever   to   lock   the  
a

djustment
 m
echanism.
as a s

afety precaution, these
operations should only be carried out
with
  the   vehicle   stationary.

87
DS3_en_Chap04_confort_ed01-2014
The heating / ventilation or air conditioning systems operates with the engine running, as well as in STOP mode with Stop & Start.
1. Temperature adjustment
F Turn  the   dial   from   blue  (
cold)   to   red   (hot)   to   adjust  
t

he   temperature   to   your  
r

equirements.
2. Air flow adjustment
F Turn   the   dial   from   position   1
to position 5 to obtain a
comfortable
  air   flow.
F

I

f you place the air flow control
in position 0 (deactivation of the
system),
  the   temperature   is   no  
l

onger   maintained   at   a   comfortable  
l

evel.   However,   a   slight   flow   of   air,  
d

ue  
t
o  
t
he  
m
ovement  
o
f  
t
he  
v
ehicle,  
c

an   still   be   felt.
3. Air distribution adjustment
Windscreen and side windows.
W indscreen, side windows and
footwells.
Footwells.
Central
  and   side   vents.
The air distribution can be
adapted
  by   placing   the   dial  
i

n   an   intermediate   position.
4. Air intake / Air recirculation
The intake of exterior air avoids the formation of   mist   on   the   windscreen   and   side   windows.
The recirculation of interior air insulates the
passenger
  compartment   from   exterior   odours  
a

nd   smoke.
Return
  to   exterior   air   intake   as   soon   as   possible  
t

o prevent deterioration of the air quality and
the
  formation   of   mist.
Manual control panel F
 
M
ove   the   manual   control   to  
t

he   left   to   be   in   the   "recycling  
i

nterior   air"   position.
F
 
M
ove   the   manual   control   to   the  
r

ight   to   return   to   the   "fresh   air  
i

ntake"   position.
comfort

DS3_en_Chap04_confort_ed01-2014
6. Air distribution adjustment
Pressing this button several times in succession enables the air flow to be
directed
  in   turn   towards:
-

t

he windscreen and the side windows
(demisting
  or   defrosting),
-

t

he windscreen, side windows and air
vents,
-

t

he windscreen, the side windows, the air
vents and the footwells,
-

t

he windscreen, the side windows and the
footwells,
-

t

he footwells,
-

t

he air vents and the footwells,
-
 
t

he
 
air   vents.
Avoid driving for long periods with the air conditioning   switched   off   (risk   of   misting a

nd   reduction   of   the   air   quality   in   the   cabin).
Press the "full fan" button to
increase   the   air   flow.
7. Air flow adjustment
The air flow symbol, the fan, fills progressively according   to   the   value   requested.
Press the "empty fan" button to
decrease
  the   air   flow.
Switching the system off
Press the air flow "empty fan"
button 7   until   the   fan   symbol  
d

isappears.
This action switches off all of the functions of
the
 
air
 
conditioning   system.
Thermal
 
comfort   is   no   longer   controlled.   A  
s

light
 
flow   of   air   resulting   from   the   movement   of  
t

he
 
vehicle,   remains   perceptible   however.
Pressing
 
the   air   flow   "full fan" button 7 or
on "AUTO"
 

reactivates   the   system   with   the  
v

alues
 
set   before   it   was   switched   off.

99
DS3_en_Chap05_amenagement_ed01
Component which protects against sunlight from  t he  f ront  o r  t he  s ide,  a lso  e quipped  w ith  a n  
i

lluminated
 v
anity
 m
irror.
F
 
W
ith   the   ignition   on,   raise   the   concealing  
f

lap;   the   mirror   is   lit   automatically.
This
  sun   visor   is   also   equipped   with   a   ticket  
h

o l d e r.
Sun visor Illuminated g love 
b

ox
This can be used to hold a water bottle.
I ts   lid   has   a   location   for   storing   the   vehicle's  
han

dbook
 pa
ck.
F
 
T
o   open   the   glove   box,   raise   the   handle.
It
  is   lit   when   the   lid   is   opened.
It
  houses   the   front   passenger's   airbag  
d

eactivation switch A .
It provides access to the ventilation nozzle B ,
distributing
  the   same   air   as   the   vents   in   the  
p

assenger
 c
ompartment.
Centre armrest
Storage
F For  access   to   the   closed   storage   box,   lift  t
he   lever   to   open   the   lid.
F
 
F
or   access   to   the   open   storage   box   below  
t

he   armrest,   lift   the   complete   armrest  
t

owards   the   rear.
These
  can   be   used   for   portable   devices   (mobile  
p

hone,   MP3   player...)   which   can   be   connected  
t

o   the   USB   port   /   auxiliary   socket   or   charged  
f

rom   the   12   V   socket   in   the   centre   console.
Comfort
  and   storage   system   for   the   driver   and  
f

ront
 p
assenger.
Fittings

103
DS3_en_Chap05_amenagement_ed01
To remove the shelf:
F  u nhook   the   two   cords,
F
 
r
aise   the   shelf   slightly,   then   unclip   it   on  
e

ach   side.
Rear parcel shelf
F Raise   the   boot   carpet   by   pulling   the   strap  u
pwards   to   gain   access   to   the   storage   box.
This
  has   areas   for   storing   a   temporary   puncture  
r

epair   kit,   a   box   of   spare   bulbs,   a   first   aid   kit,  
t

wo   warning   triangles,   ...
Storage box
F refit  the   boot   floor   carpet   by   folding   it  s
lightly   in   the   middle.
Fittings