automatic transmission Citroen DS3 2014 1.G Owner's Manual

237
DS3_en_Chap10_info-pratiques_ed01-2014
F On  the   front   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
P
lace   the   gear   lever   in   neutral   (position   N
for
  an   electronic   or   automatic   gearbox). F
 O n   the   rear   bumper,   unclip   the   cover   by  p
ressing   at   the   bottom.
F
 
S
crew   the   towing   eye   in   fully.
F
 
I
nstall   the   towing   bar.
F
 
S
witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M
ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Towing your vehicleTowing another vehicle
Failure to observe this special condition
could
  result   in   damage   to   certain  
c

omponents   (braking,   transmission...)  
a

nd   the   absence   of   braking   assistance  
t

he   next   time   the   engine   is   started.
F
 
U

nlock   the   steering   by   turning   the   key   one  
n

otch   in   the   ignition   switch   and   release   the  
par

king
 b
rake.
F
 
S

witch   on   the   hazard   warning   lamps   on  
b

oth   vehicles.
F
 
M

ove   off   gently   and   drive   for   a   short  
d

istance
 o
nly.
Practical information

05
DS3_en_Chap13b_RT6-2-8_ed01-2014
Principal TMc symbols
Red and yellow triangle: traffic information, for example:
Black   and   blue   triangle:   general   information,   for   example:
Weather reports
Modified
  signage
Risk
  of   explosion Traffic
  reports
Narrow   carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
a

ccident
Danger
Parking
Delay
No entry Snow
  /   ice
Roadworks
Traffic
  jam
Receiving TA messages
The TA (Traffic  Announcement)   function   gives   priority   to  T A  alert  messages.
 T o   operate,   this   function   needs   good   reception   of   a  
radio

  station   transmitting   this   type   of   message.   When   a   traffic   report  
is

  transmitted,   the   current   audio   source   (Radio,   CD,   USB,   ...)   is  
interrupted

  automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

  the   audio   source   resumes   at   the   end   of   the   transmission   of   the  
message.Press

RA d IO   to   display   the   menu.
Select "Service announcements" then
confirm.
a

ctivate or deactivate "TA "
  then   confirm.
The
  volume   setting   for  
T
A
 
messages   can   be   adjusted   only   during   the  
transmission

  of   this   type   of   alert.
Activate
  or   deactivate   the   function   at   any   time   by   pressing  
the

  button.
During
  a   message,   press   the   button   to   interrupt   it.
TRAFFIc INFORMATION

04
DS3_en_Chap13c_RD45_ed01-2014
AUdIO
Insert circular compact discs only.
Some   anti-pirating   systems,   on   original   discs   or   CDs   copied   using   a  
personal

  recorder,   may   cause   faults   which   are   no   reflection   on   the  
quality

  of   the   vehicle's   player.
Without
  pressing   the   EJECT
 
button,   insert   a   CD   in   the   player,   play  
begins

  automatically.
cd
Playing
a cd
To play a disc which has already been
inserted, press the S o URCE button
several
  times   in   succession   and  
select

  CD.
Press one of the buttons to select a
track
  on   the   CD.
Press
 
the
 
LIST
 
REFRESH   button   to   display   the   list   of   tracks   on   the  
CD.Press and hold one of the buttons for
fast

  forwards   or   fast   backwards.
Receiving TA messages
Press the Ta button to activate or
deactivate   traffic   messages.
The
 
T

A
 

(Traffic  
Announcement)
  function   gives   priority   to  
T
A
 
alert  
messages.

 
T
o   operate,   this   function   needs   good   reception   of   a  
radio

 
station
  transmitting   this   type   of   message.   When   a   traffic  
report

 
is
 
transmitted,   the   current   audio   source   (Radio,   CD,   ...)   is  
interrupted

 
automatically   to   play   the  
T
A
 
message.   Normal   playback  
of

 
the
 
audio
  source   resumes   at   the   end   of   the   transmission   of   the  
message.

06
347
DS3_en_Chap13c_RD45_ed01-2014
Initiate the pairing between the telephone and the  vehicle.  This   pairing   can   be   initiated   from  
the

  vehicle's   telephone   function   menu   or   via   the  
telephone's

  keypad.   Refer   to   the   steps   in   "Pairing  
a

  telephone"   on   the   previous   pages.   During   the  
pairing

  phase,   the   vehicle   must   be   stationary   with  
the

  key   in   the   ignition.
Select
  the   telephone   to   be   connected   from   the   telephone   function   menu.
The
  audio   system   connects   to   a   newly   paired   telephone  
automatically

.
Bluetooth audio streaming*
Wireless transmission of music files on the telephone, played via the  audio   equipment.  The   telephone   must   be   able   to   manage   the  
appropriate

  Bluetooth   profiles   (Profiles  
A2DP 
/  
A
VRCP).
*
 
Depending   on   the   compatibility   of   the   telephone.
**
  
In

 
certain   cases,   playing   of   the  
Audio
  files   must   be   initiated   from   the  
keypad.
***

 
If
 
the   telephone   supports   the   function.
Activate
  the   streaming   source   by  
pressing

  the   SOURCE   button**.  
The

  tracks   to   be   played   can   be  
controlled as usual via the buttons on
the

  audio   system   control   panel   and  
the

  steering   mounted   controls***.  
The

  contextual   information   can   be  
displayed

  on   the   screen.
During
 
a
 
call,
 
press
 
this
 
button
 
for
 
more
 
than
 
2

 
seconds.
Confirm
 
with
 
OK
 
to
 
end
 
the
 
call.
Ending a call
BLUETOOTH FUNcTIONS