display Citroen DS3 2014 1.G Owner's Manual

DS3_en_Chap00c_eco-conduite_ed01-2014
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as
 s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
The
  gear   shift   indicator   invites   you   engage   the   most   suitable   gear:   as  
s

oon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
control the use of your electrical
equipment
If your vehicle has cruise control, make use of the system at speeds a bove   25   mph   (40   km/h)   when   the   traffic   is   flowing   well.As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  c
onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect   your   portable   devices   before   leaving   the   vehicle.

DS3_en_Chap01_controle-de-marche_ed01-2014
Petrol - Diesel instrument panels, manual, electronic 
o r   automatic   gearbox
Provided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps.
1.
R
ev counter.
I

ndicates the speed of rotation of the
engine
  (x   1   000   rpm).
2.
V

ehicle speed.
 I

ndicates   the   current   speed   of   the   moving  
v

ehicle   (mph   or   km/h).
3.
E

ngine coolant temperature.
 I

ndicates   the   temperature   of   the   engine  
c

oolant
 li
quid.
dials
7. Lighting dimmer button. Adjusts the level of the instrument and controls i
llumination   and   the   interior   mood   lighting.4. display screen.
5. F uel level.
 I

ndicates   the   quantity   of   fuel   remaining   in  
t

he   tank.
6.
di

splay management button.
 A

lternates   display   between   range   and   trip  
mil

eage
 re
corder.
 S

ervicing
 in
formation.
R

esets the selected function to zero (trip
distance
  recorder   or   service   indicator).For
  more   information,   refer   to   the  
p

aragraph   relating   to   the   button   or  
f

unction   and   its   associated   display.

19
DS3_en_Chap01_controle-de-marche_ed01-2014
Screen
E. Service indicator  (
miles   or   km),   then  

T

otal mileage recorder
T

hese two functions are displayed
successively
  when   switching   on   the   ignition
F.
E

ngine oil level indicator
 A

ppears   a   few   seconds   after   switching   on  
t

he   ignition,   then   disappears.
A. S
peed limiter
 (
mph
 
or
 
km/h)
 
or
cr

uise control.
B.
G

ear shift indicator.
c

.
E

lectronic or automatic gearbox
information.
d

.
R

ange
 (

miles
 
or
 
km)
 
or
T

rip mileage recorder.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
RACING petrol instrument panel, manual gearboxProvided with permanent back-lighting, the instrument panel groups together the vehicle's dials and indicator and warning lamps.
1.
R
ev counter.
I

ndicates the speed of rotation of the
engine
  (x   1   000   rpm).
2.
V

ehicle speed.
 I

ndicates   the   current   speed   of   the   moving  
v

ehicle   (mph   or   km/h).
3.
E

ngine coolant temperature.
 I

ndicates   the   temperature   of   the   engine  
c

oolant
 li
quid.
dials
7. Lighting dimmer button. Adjusts the level of the instrument and controls i
llumination   and   the   interior   mood   lighting.4. display screen.
5. F uel level.
 I

ndicates   the   quantity   of   fuel   remaining   in  
t

he   tank.
6.
di

splay management button
 A

lternates   display   between   range   and   trip  
mil

eage
 re
corder.
 S

ervicing
 in
formation.
R

esets the selected function to zero (trip
distance
  recorder   or   service   indicator).For
  more   information,   refer   to   the  
p

aragraph   relating   to   the   button   or  
f

unction   and   its   associated   display.

21
DS3_en_Chap01_controle-de-marche_ed01-2014
Screen
c. Service indicator  (
miles   or   km),   then  

T

otal mileage recorder
These two functions are displayed
successively
  when   switching   on   the  
ig

nition.
d. Engine oil level indicator  A
ppears   a   few   seconds   after   switching   on  
t

he   ignition,   then   disappears.
A.
S

peed limiter

 (

mph
 
or
 
km/h)
 
or

cr

uise control.
B.
R

ange

 (

miles
 
or
 
km)
 
or
T

rip mileage recorder.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vicing
 s
chedule.
Service indicator
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the   spanner   symbolising   the   service   operations  
c

omes   on.   The   distance   recorder   display   line  
i

ndicates   the   distance   remaining   before   the  
n

ext   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain  
b

efore   the   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   distance.
For
b
l

ue HDi Diesel versions, the
degree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
i

s
 
also
 
taken
 
into
 
account
 
(depending
 
o

n
 
the
 
country
 
of
 
sale).
The
 
point
 
at
 
which
 
the
 
next
 
service
 
is
 
due
 
is
 
c

alculated
 
from
 
the
 
last
 
indicator
 
zero
 
reset,
 
d

epending
 
on
 
the
 
distance
 
travelled
 
and
 
the
 
t

ime
 
elapsed
 
since
 
the
 
last
 
service.
More than 1 800 miles (3 000 km)
remain before the next service is
due
When the ignition is switched on, no service i nformation   appears   in   the   screen.

DS3_en_Chap01_controle-de-marche_ed01-2014
Service indicator zero reset
After each service, the service indicator must be   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F

p
ress and hold the trip distance recorder
zero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F

w
hen the display indicates "=0" , release
the
  button;   the   spanner   disappears. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Retrieving the service
information
You can access the service information at any t
ime.
F

P
ress the trip distance recorder zero reset
button.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.

DS3_en_Chap01_controle-de-marche_ed01-2014
The total and trip distances are displayed for
thirty  seconds   when   the   ignition   is   switched   off,  
w

hen the driver's door is opened and when the
vehicle
  is   locked   or   unlocked.
distance recorders
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
When
 
traveling
 
abroad,
 
you
 
may
 
h

ave
 
to
 
change
 
the
 
units
 
of
 
distance:
 
t

he
 
display
 
of
 
road
 
speed
 
must
 
be
 
in
 
t

he
 
official
 
units
 
(miles
 
or
 
km)
 
for
 
the
 
c

ountry.
 
The
 
change
 
of
 
units
 
is
 
done
 v
ia
 
the
 
screen
 
configuration
 
menu,
 
with
 t
he
 
vehicle
 
stationary.
Trip distance recorder
It measures the distance travelled since it was r
eset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.

41
DS3_en_Chap01_controle-de-marche_ed01-2014
Black panel
System allowing certain displays to be switched off   for   night   driving.
The
  instrument   panel   remains   illuminated   with  
o

nly the vehicle speed and cruise control or
speed
  limiter   information,   if   in   use.
If
  there   is   an   alert   or   a   change   in   a   function  
o

r   to   a   setting,   the   black   panel   mode   is  
i

nterrupted.Activation
F With   the   lighting   on,   press   the   left   hand  b
utton   of   the   instrument   panel   several  
t

imes   to   progressively   reduce   the  
d

ashboard   lighting   level.
F
 
P
ress   the   button   again   to   reduce   the  
l

ighting   to   the   minimum   level   and   switch   off  
t

he   interior   mood   lighting.
F
 
P
ress   the   button   again   to   activate   the   black  
pan

el.
System
 
for
 
manual
 
adjustment
 
of
 
the
 b
rightness
 
of
 
the
 
instruments
 
and
 
controls
 
in
 r
elation
 
to
 
the
 
exterior
 
brightness.
Lighting dimmer
Activation
When the lighting is on:
F  p ress   the   button   to   change   the   brightness  
o

f   the   instruments   and   controls,
F
 
w
hen   the   level   of   brightness   required   is  
r

eached,   release   the   button.
deactivation
When the lighting is off, or in day mode on vehicles   fitted   with   daytime   running   lamps,  
p

ressing   the   button   does   not   have   any   effect.
Monitoring

DS3_en_Chap01_controle-de-marche_ed01-2014
Trip computer
Monochrome screen A
Information displays
F Press the button, located at the end of the wiper stalk ,
  to   display   the   various   items   of  
t

rip   computer   information   in   succession.The
  trip   computer   provides   the   following  
i

nformation:
-
 ra
nge,
-  
c
urrent   fuel   consumption,
-  
S
top   &   Start   time   counter,
- d istance travelled,
-  
a
verage   fuel   consumption,-
 a

verage
 s
peed.
F  
T
he   next   press   then   returns   you   to   the  
n

ormal
 d
isplay.
System   that   gives   you   information   on   the   current   journey   (range,   fuel   consumption…).
Zero reset
F Press
  the   control   for   more   than   two  s
econds to reset to zero the distance
travelled,
  the   average   fuel   consumption  
a

nd   the   average   speed.