service indicator CITROEN DS3 2018 Handbook (in English)

9
Instrument panel
Dials
1.Rev counter.
Indicates the engine speed (x 1,000
rpm).
2. Speed of the vehicle.
Indicates the current speed of the moving
vehicle (km/h or mph).
3. Coolant temperature.
Indicates the engine coolant temperature.
4. Display screen.
5. Fuel level.
Indicates the amount of fuel in the tank.
6. Display management button.
Alternates display of range and the trip
distance recorder.
Recalls servicing information.
Resets the selected function to zero (trip
distance recorder or service indicator).
7. Lighting dimmer button.
Acts on the brightness of the instruments
and controls and the interior mood
lighting.
01
Instruments

10
A.Speed limiter
(mph or km/h) or
Cruise control.
B. Gear efficiency indicator.
C. Electronic or automatic gearbox
information.
D. Range
(miles or km) or
Trip distance recorder.
E. Service indicator
(miles or km) then,
Odometer.
These two functions are displayed
successively when switching on the
ignition.
F. Engine oil level indicator.
Appears a
few seconds after switching on
ignition, then disappears.
Display screen
01
Instruments

11
PERFORMANCE
instrument panel
Dials
1.Rev counter.
Indicates the engine speed (x 1,000
rpm).
2. Speed of the vehicle.
Indicates the current speed of the moving
vehicle (km/h or mph).
3. Coolant temperature.
Indicates the engine coolant temperature.
4. Display screen.
5. Fuel level.
Indicates the amount of fuel in the tank.
6. Display management button.
Alternates display of range and the trip
distance recorder.
Recalls servicing information.
Resets the selected function to zero (trip
distance recorder or service indicator).
7. Lighting dimmer button.
Acts on the brightness of the instruments
and controls and the interior mood
lighting.
01
Instruments

12
A.Speed limiter
(mph or km/h) or
Cruise control.
B. Range
(miles or km) or
Trip distance recorder.
C. Service indicator
(miles or km) then,
Odometer.
These two functions are displayed
successively when switching on the
ignition.
D. Engine oil level indicator.
Appears a
few seconds after switching on
ignition, then disappears.
Warning and indicator
lamps
Visual identifiers informing the driver that
a system is in operation, switched off (on/
off indicator lamps) or has developed a
fault
(warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
s econds when the ignition is switched on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off refer to the
information on the warning lamp concerned.
The passenger airbag system operation
indicator lamp remains lit for one minute after
the ignition is on, even after the engine is
started.
Associated warnings
The lighting of certain indicator lamps may
be accompanied by an audible signal and
a
message on the multifunction screen. The warning lamp may come on
continuously (fixed) or flash.
Some warning lamps may have both types
of lighting. Only by relating the type of
illumination to the operating status of the
vehicle can it be ascertained whether the
situation is normal or whether a
fault has
occurred.
Warning lamps
When the engine is running or the vehicle is
being driven, illumination of one of the following
warning lamps indicates a
fault which requires
action on the part of the driver.
Any fault resulting in the illumination of
a


warning lamp must be investigated
further by reading the associated
message.
If you encounter any problems, contact the
dealer network or a
qualified workshop.
Display screen
01
Instruments

16
Warning/indicator lampStateCause Action/Observations
Engine
diagnostic
system Flashing.
The engine management system has
a


fault.The catalytic converter may be destroyed.
Have it checked in the dealer network or by
a


qualified workshop.
Fixed. The emission control system has
a


fault.
The warning lamp should go off when the engine is started.
If it does not go off, contact the dealer network or a
qualified workshop without delay.
ServiceTemporarily on. A minor fault has occurred for which
there is no specific warning lamp. Identify the fault by reading the message shown in
the screen, such as, for example:
-

e
ngine oil level,
-

s
creenwash fluid level,
-
r

emote control battery,
-

p
article filter saturation on Diesel vehicles.
For any other faults, contact the dealer network or
a


qualified workshop.
Fixed. A major fault has occurred for which
there is no specific warning lamp. Identify the fault by reading the message shown in
the screen and then contact the dealer network or a
qualified workshop.
Anti-lock
Braking System
(ABS) Fixed.
The anti-lock braking system has
a


fault.The vehicle retains conventional braking.
Drive carefully at reduced speed and contact the
dealer network or a
qualified workshop without delay.
01
Instruments

19
Warning/indicator lampStateCause Action/Observations
AdBlue
®
(BlueHDi Diesel)Fixed, on switching
on the ignition,
accompanied by an
audible signal and
a
message indicating the
remaining driving range.The remaining driving range is
between 370 miles and 1,500 miles
(600
km and 2,400 km). Have the AdBlue® tank topped up as soon as
possible: go to a

member of the dealer network or
a

qualified workshop, or carry out this operation
yourself.
+
Flashing, associated with
the SERVICE warning
light, accompanied by
an audible signal and
a message indicating the
remaining driving range.The remaining driving range is
between 0 and 370 miles
(0
and 600 km). You must top up the AdBlue® tank to avoid
a
breakdown : go to a

member of the dealer network
or a

qualified workshop, or carry out this operation
yourself.
Flashing, associated with
the SERVICE warning
lamp, accompanied
by an audible signal
and a
message
indicating that starting is
prevented.The AdBlue® tank is empty: the
starting inhibition system required
by legislation prevents starting of the
engine. To be able to start the engine, you must top up the
AdBlue® tank: go to the dealer network or a qualified
w
orkshop, or carry out this operation yourself.
It is essential to add at least 4
litres of AdBlue
® to the
corresponding tank.
For topping up or for more information
on AdBlue
®, refer to the corresponding
section.
01
Instruments

20
Warning/indicator lampStateCause Action/Observations
+
+ SCR emissions
control system
(BlueHDi Diesel)
Fixed, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a
message.A fault with the SCR emissions
control system has been detected.
This alert disappears once the exhaust emissions
return to normal levels.
Flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied by
an audible signal and
a


message indicating
the remaining driving
range.After confirmation of the fault with
the emissions control system,
you can continue driving for up to
685
miles (1,100 km) before the
engine start inhibition system is
triggered. To avoid a
breakdown, contact the dealer network
or a qualified workshop without delay.
Flashing, on switching
on the ignition,
associated with the
SERVICE and engine
diagnostic warning
lamps, accompanied
by an audible signal
and a

message. You have exceeded the authorised
driving limit following confirmation
of a
fault with the emissions control
system: the engine start inhibition
system prevents starting of the
engine. To be able to restart the engine, you must
call on the
dealer network or a
qualified workshop.
01
Instruments

25
Service indicator
Warning/indicator lampStateCause Action/Observations
Service spanner Fixed, temporary
when the ignition is
switched on. Between 1,860
miles (3,000 km) and
620
miles (1,000 km) remain before
the next ser vice is due. The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-

t
he distance recorder displays a line showing the
distance remaining (in kilometres or miles) before
the next ser vice is due.
-

a
n alert indicates the distance remaining (in
kilometres or miles) as well as the period before
the next ser vice is due.
The service spanner disappears after a


few seconds.
The alert may be triggered close to the due date.
Fixed, when the
ignition is switched
on. Less than 620
miles (1,000 km)
remain before the next ser vice is
due. The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-

t
he distance recorder display line indicates the
distance remaining before the next ser vice is due.
-

a
n alert message indicates the distance remaining
as well as the period before the next ser vice is
due.
The ser vice spanner remains on to show that
a
ser vice is required very soon.
The alert may be triggered close to the due date.
01
Instruments

26
Warning/indicator lampStateCause Action/Observations
Service spanner Flashing then fixed,
when the ignition is
switched on. Service is overdue.
The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-

t
he total distance recorder displays a line showing
the distance travelled since ser vice was due. The
value is preceded by the "-" sign.
-

a
n alert message indicates that ser vice is
overdue.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
+ Flashing then fixed,
when the ignition
is switched on,
associated with the
Ser vice warning
lamp.Ser vice is overdue for diesel
BlueHDi versions.
The ser vice indicator is displayed for a
few seconds
in the instrument panel. Depending on the version:
-

t
he total distance recorder displays a line showing
the distance travelled since ser vice was due. The
value is preceded by the "-" sign.
-

a
n alert message indicates that ser vice is
overdue.
The ser vice spanner remains on until the ser vice has
been performed.
The alert is triggered when the due date has passed.
The distance indicated (in kilometres
or miles) is calculated according to the
mileage covered and the time elapsed
since the last ser vice.
01
Instruments

27
Resetting the service indicator
After each service, the service indicator must
be reset to zero.
The procedure for resetting to zero is as
follows:
F
S
witch off the ignition.
F

P
ress and hold the trip distance recorder
reset button.
F

S
witch on the ignition; the distance recorder
display begins a


countdown.
F

W
hen the display indicates "=0", release the
button; the spanner disappears.
Following this step, if you wish to
disconnect the battery, lock the vehicle
and wait at least five minutes for the reset
to be taken into account.
Retrieving the service information
You can access the ser vice information at any
time.
F
P
ress the trip distance recorder reset
button. The ser vice information is displayed
for a
few seconds, then disappears.
Engine oil level indicator
Oil level correct
Low oil level
(Depending on version) The level read will only be correct if the
vehicle is on level ground and the engine
has been off for more than 30
minutes.
It is indicated by "OIL" flashing, accompanied
by the Ser vice warning lamp lighting up, an
audible signal and a

message.
If the low oil level is confirmed by a
check using
the dipstick, the level must be topped up to
avoid damage to the engine.
For more information on Checking levels ,
refer to the corresponding section.
On versions fitted with an electric oil level
indicator, the state of the engine oil level is
displayed in the instrument panel for a
few
seconds after switching the ignition on, after
the servicing information.
01
Instruments