brake light CITROEN DS3 CABRIO DAG 2015 Handbook (in English)

DS3_en_Chap00b_vue-ensemble_ed01-2014
Exterior
customising kits
These expressive stickers form part   of   a   range   of   kits,   very  
d

ifferent   one   from   another,   which  
a

llow you to create a unique
and
  attractive   exterior   for   your  
v

ehicle.
Guide-me-home lighting
After switching off the ignition, under low lighting conditions the headlamps remain   on   for   a   few   seconds   to   help   you   leave   the   vehicle.
Active city Brake
The purpose of this system is to avoid a frontal collision   or   reduce   the   speed   of   impact   if   the  
d

river   fails   to   take   action   or   does   not   take  
s

ufficient   action.
2 41
13 5 157
Stop & Start
This system puts the engine t
emporarily   on   standby   during  
s

tops   in   the   traffic   (red   lights,   traffic  
j

ams,   etc...).   The   engine   restarts  
a

utomatically   as   soon   as   you   want  
t

o   move   off.   The   Stop   &   Start   system  
r

educes   fuel   consumption,   exhaust  
e

missions   and   the   noise   level   when  
s

tationary. 118

DS3_en_Chap00c_eco-conduite_ed01-2014
Before moving off, if the passenger compartment is too warm, ventilate it by   opening   the   windows   and   air   vents   before   using   the   air   conditioning.
Above
  30   mph   (50   km/h),   close   the   windows   and   leave   the   air   vents
 ope

n.
Remember
  to   make   use   of   equipment   that   can   help   keep   the
 t

emperature   in   the   passenger   compartment   down   (sunroof   and   window
 b

linds...).
Switch
  off   the   air   conditioning,   unless   it   has   automatic   regulation,   as
 s

oon   as   the   desired   temperature   is   attained.
Switch
  off   the   demisting   and   defrosting   controls,   if   not   automatic.
Switch
  off   the   heated   seat   as   soon   as   possible.
Switch
  off   the   headlamps   and   front   foglamps   when   the   level   of   light  
d

oes   not   require   their   use.
Avoid
  running   the   engine   before   moving   off,   particularly   in   winter;   your  
v

ehicle   will   warm   up   much   faster   while   driving.
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting. During   acceleration   change   up   early.
With
  an   automatic   or   electronic   gearbox,   give   preference   to   automatic  
m

ode   and   avoid   pressing   the   accelerator   pedal   heavily   or   suddenly.
The
  gear   shift   indicator   invites   you   engage   the   most   suitable   gear:   as  
s

oon   as   the   indication   is   displayed   in   the   instrument   panel,   follow   it  
s

traight   away.
For
  vehicles   fitted   with   an   electronic   or   automatic   gearbox,   this  
i

ndicator   appears   only   in   manual   mode.
drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than   the   brake   pedal,   and   press   the   accelerator   progressively.   These  
p

ractices   contribute   towards   a   reduction   in   fuel   consumption   and   CO
2
emissions
 
and
 
also
 
helps
 
reduce
 
the
 
background
 
traffic
 
noise.
control the use of your electrical
equipment
If your vehicle has cruise control, make use of the system at speeds a bove   25   mph   (40   km/h)   when   the   traffic   is   flowing   well.As
  a   passenger,   if   you   avoid   connecting   your   multimedia   devices  
(

film,   music,   video   game...),   you   will   contribute   towards   limiting   the  c
onsumption   of   electrical   energy,   and   so   of   fuel.
Disconnect   your   portable   devices   before   leaving   the   vehicle.

DS3_en_Chap01_controle-de-marche_ed01-2014
Warning lampis oncau seAction / Observations
di

esel engine
pre-heating fixed.
The
  key   is   at   position   2   (ignition   on)   in  
t

he   ignition   switch.Wait
  until   the   warning   lamp   goes   off   before   starting.
The
  period   of   illumination   of   the   warning   lamp   is  
d

etermined   by   the   climatic   conditions   (up   to   about  
t

hirty   seconds   in   extreme   climatic   conditions).
If
  the   engine   does   not   start,   switch   the   ignition   off   and  
t

hen   on,   wait   until   the   warning   lamp   goes   off   again,  
t

hen   start   the   engine.
Parking brake fixed. The
  parking   brake   is   applied   or   not  
p

roperly
 r
eleased.Release
  the   parking   brake   to   switch   off   the   warning  
l

amp,   keeping   your   foot   on   the   brake   pedal.
Observe
  the   safety   recommendations.
For
  more   information   on   the   parking   brake,   refer   to   the  
c

orresponding
 s
ection.
Stop & Star t fixed. When
  the   vehicle   stops   (red   lights,
 t

raffic   jams,   ...)   the   Stop   &   Start   system
 h

as   put   the   engine   into   STOP   mode.The
  warning   lamp   goes   off   and   the   engine   restarts  
a

utomatically   in   START   mode,   as   soon   as   you   want   to  
m

ove   off.
flashes for a few
seconds,
  then   goes  
o

f f.STOP
  mode   is   temporarily  
u

navailable.
or
START
  mode   is   invoked  
au

tomatically.For
  more   information   on   special   cases   with   STOP  
m

ode   and   START   mode,   refer   to   the   "Stop   &   Start"  
s

ection.

53
DS3_en_Chap02_ecrans-multifonction_ed01-2014
"Personalisation-
con
figuration"
menu
Once this menu has been selected, you can g
ain   access   to   the   following   functions:
-
 
d
efine   the   vehicle   parameters,
-
 
d
isplay   configuration,
-
 
c
hoice   of   language.
Define the vehicle parameters
Once this menu has been selected, you can activate   or   deactivate   the   following   equipment:
-
 
w
iper   linked   to   reverse   gear   (refer   to   the  
"

Visibility" section),
-
 
g
uide-me-home   lighting   and   duration   (refer  
t

o the " Visibility" section), Example:
  setting   of   the   duration   of   the  
guide-me-home l ighting
F P ress the "5" or " 6" buttons, then the
"OK"
 

button   to   select   the   menu   required.F

P
ress the "
5" or " 6" buttons, then the
"OK"
 
button   to   select   the   "Guide-me-home  
h

eadlamps"
 l
ine.
F
P
ress the "
7" or " 8" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
 
button   to   confirm.
F
P
ress the "5" or " 6" buttons, then the
"OK" button to select the "OK"
 

box   and  
c

onfirm   or   press   the   "Back" button to
cancel.
This menu is also used to reinitialise the tyre u nder-inflation   detection   system   (refer   to   the  
"

Safety"
 s
ection).
-
 
p
arking   sensors   (refer   to   the   "Driving"  
s

ection).
-  
a
utomatic   emergency   braking   (refer   to  
t

he "Safety" section, under "
ac
tive City
Brake").
Multifunction screens

57
DS3_en_Chap02_ecrans-multifonction_ed01-2014
Vehicle parameters
This menu allows you to activate or deactivate certain   driving   and   comfort   systems,   arranged  
b

y
 c
ategory:
-
"Parking sensors "
 R

efer   to   the   "Driving"   section.
-
"Operation of rear wiper "
●
 
"R

ear wiper in reverse: O " (Rear wiper
coupled
  to   reverse   gear)
 R

efer   to   the   " Visibility"   section.
-
"Lighting configuration "
●
 
"duration of guide-me-home lighting: O "
(Automatic   guide-me-home   lighting)
 Refer  to   the   " Visibility"   section.
-

"dr iving assistance "
●
 
"A

utomatic emergency braking: OFF "
(Active
  City   Brake)
 R

efer   to   the   "Safety"   section.
●
 
"I

nitialisation of under-inflation "
(Reinitialisation of the tyre under-
inflation
  detection   system)
 R

efer   to   the   "Safety"   section.
Trip computer
This menu allows you to view information on   the   state   of   the   vehicle.   You   can   choose  
b

etween   the   following   functions:
-
"Aler t log ".
 L

ist   of   active   alerts.
-
"State of functions "
L

ist of the state of functions (activated,
deactivated or faulty)
For
  safety   reasons,   configuration   of   the  
s

creen   by   the   driver   must   only   be   done  
w

hen   stationary.
Multifunction screens

DS3_en_Chap06_conduite_ed01-2014
There is a risk of damage to the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
g

ear   lever   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   gear   lever   in
 t

he N
 

position   and   apply   the   parking   brake.
If the lever is not in position P
,
when the driver's door is opened or
approximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the lever to position P ;
 
the
 
m

essage
 d

isappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from   N to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact a CITR
oË

N dealer or a qualified
workshop
 
as   soon   as   possible.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
four
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or N 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to
 i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

DS3_en_Chap06_conduite_ed01-2014
Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Per fect
  for   urban   use,   the   Stop   &   Start   system   reduces   fuel   consumption   and   exhaust   emissions   as   well   as   the   noise   level   when   stationary.
Operation
Going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "E
cO
" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-

w

ith a manual gearbox , at speeds below
12
 
mph
 
(20
 
km/h),
 
when
 
you
 
put
 
the
 
gear
 
l

ever into neutral, and you release the
clutch
 
pedal.
-

w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
you
 
p

ress
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
lever
 
i

n position N .
A
 
time
 
counter
 
calculates
 
the
 
sum
 o

f
 
the
 
periods
 
in
 
STOP
 
mode
 d

uring
 
a
 
journey.
 
It
 
rests
 
itself
 t

o
 
zero
 
every
 
time
 
the
 
ignition
 
is
 s

witched
 
on
 
with
 
the
 
key. STOP
  mode   is   not   invoked   when:
- t he driver's door is open,
-

t
he driver's seat belt is not fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(10
  km/h)   since   the   last   engine   start   using  
t

he   key,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
Special cases: STOP mode not
available
The "EcO" warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.

Braking assistance systems
Group of supplementary systems which help you   to   obtain   optimum   braking   in   complete  
s

afety   in   emergency   situations:
-
 
a
nti-lock   braking   system   (ABS),
-
 
e
lectronic   brake   force   distribution   (EBFD),
-
 
e
mergency   braking   assistance   (EBA).Anti-lock braking system
and electronic brake force
distribution
Linked systems which improve the stability and manoeuvrability   of   your   vehicle   when   braking,  
i

n   particular   on   poor   or   slippery   sur faces.
Activation
The anti-lock braking system comes into operation   automatically   when   there   is   a   risk   of  
w

heel   lock.
Normal
  operation   of   the   ABS   may   make   itself  
f

elt   by   slight   vibration   of   the   brake   pedal.
When
  braking   in   an   emergency,   press  
v

ery   firmly   without   releasing   the  
p

ressure.
Operating fault
If this warning lamp comes on, together   with   the   STOP and ABS
warning
  lamps,   accompanied   by   an  
a

udible
 
signal   and   a   message   in   the   screen,   it  
i

ndicates
 
a   malfunction   of   the   electronic   brake  
f

orce distribution which could result in loss of
control
 
of
  the   vehicle   when   braking.
You must stop as soon as it is safe to do so.
When
  replacing   wheels   (tyres   and  
r

ims),   ensure   that   they   conform   to   the  
ma

nufacturer's
 r
ecommendations.
If
  this   warning   lamp   comes   on,  
a

ccompanied   by   an   audible   signal  
a

nd   a   message   in   the   screen,   it  
i

ndicates
 
a   malfunction   of   the   anti-lock   braking  
s

ystem
 
which   could   result   in   loss   of   control   of  
t

he
 
vehicle   when   braking.
In either case, contact a CITR
oË
N dealer or a
qualified
 w

orkshop.

239
DS3_en_Chap10_info-pratiques_ed01-2014
RAcING towbar
Your vehicle cannot be fitted with a
towbar.  The   space   occupied   by   the  
s

port   diffuser   prevents   this.
Ty r e s
F Check  the   tyre   pressures   of   the   towing  v
ehicle   and   of   the   trailer,   observing   the  
re

commended
 p
ressures.
cooling
Towing a trailer on a slope increases the temperature   of   the   coolant.
As
  the   fan   is   electrically   controlled,   its   cooling  
c

apacity   is   not   dependent   on   the   engine   speed.
F
 
T
o   lower   the   engine   speed,   reduce   your  
s

peed.
The
  maximum   towed   load   on   a   long   incline  
d

epends   on   the   gradient   and   the   ambient  
t

emperature.
In
  all   cases,   keep   a   check   on   the   coolant  
t

emperature.
Braking
Towing a trailer increases the braking distance.
T o   avoid   overheating   of   the   brakes   on   a   long  
m

ountain   type   of   descent,   the   use   of   engine  
b

raking   is   recommended.
Lighting
F Check   the   electrical   lighting   and   signalling  o
n   the   trailer.
The
  rear   parking   sensors   will   be  
d

eactivated   automatically   if   a   genuine  
C

ITROËN   towbar   is   used.
F
 
I

f
 
the
 
warning
 
lamp
 
and
 
the
 
S

TOP
 

warning
 
lamp
 
come
 
on,
 
s

top the vehicle and switch off
the
 
engine
 
as
 
soon
 
as
 
possible.
Practical information

DS3_en_Chap11_verifications_ed01-2014
Manual gearbox
Automatic gearboxBrake pads
Brake wear depends on the style o
f   driving,   particularly   in   the   case o

f vehicles used in town, over short
distances.
  It   may   be   necessary   to   have
 t

he   condition   of   the   brakes   checked,
 e

ven   between   vehicle   services.
The
 
gearbox
 
does
 
not
 
require
 
any
 m
aintenance
 
(no
 
oil
 
change).
Refer
 
to
 
the
 
maintenance
 
and
 
w

arranty
 
guide
 
for
 
the
 
checking
 
i

nterval
 
for
 
this
 
component.
Only
  use   products   recommended   by  
C

ITR
oË
N or products of equivalent
quality
 an

d
 sp
ecification.
In
  order   to   optimise   the   operation   of  
u

nits   as   important   as   those   in   the  
b

raking   system,   CITROËN   selects   and  
o

ffers   very   specific   products.
The
 
gearbox
 
does
 
not
 
require
 
any
 
m

aintenance
 
(no
 
oil
 
change).
Refer
 
to
 
the
 
maintenance
 
and
 
w

arranty
 
guide
 
for
 
details
 
of
 
the
 
level
 
c

hecking
 
interval
 
for
 
this
 
component.
Electronic gearbox
The gearbox does not require any m aintenance   (no   oil   change).
Refer
  to   the   maintenance   and  
w

arranty   guide   for   details   of   the  
c

hecking   interval   for   this   component. For
  information   on   checking   brake  
d

isc wear, contact a CITR
oË
N dealer
or
  a   qualified   workshop.
Brake disc wearParking brake
If excessive travel or a loss of e
ffectiveness   of   this   system   is  
n

oticed,   the   parking   brake   must   be  
c

hecked,   even   between   two   services.
Unless
 
there
 
is
 
a
 
leak
 
in
 
the
 
circuit,
 
a
 
drop
 
in
 
t

he
 
brake
 
fluid
 
level
 
indicates
 
that
 
the
 
brake
 
p

ads
 
are
 
worn. Checking
 
this   system   must   be   done   by   a  
C

ITROËN   dealer   or   a   qualified   workshop.
After
 
washing
 
the
 
vehicle,
 
dampness,
 
o

r
 
in
 
wintry
 
conditions,
 
ice
 
can
 
form
 
o

n
 
the
 
brake
 
discs
 
and
 
pads:
 
braking
 
e

fficiency
 
may
 
be
 
reduced.
 
Make
 
light
 
b

rake
 
applications
 
to
 
dry
 
and
 
defrost
 
t

he
 
brakes.