tailgate CITROEN DS3 CABRIO DAG 2015 Handbook (in English)

71
DS3_en_Chap03_ouvertures_ed01-2014
boot
Opening
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   press   the  
o

pening   control   and   raise   the   tailgate.
closing
F Lower  the   tailgate   using   the   interior   grab  han
dle.
If
  the   tailgate   is   not   closed   correctly:
-

when the engine is running , this
warning   lamp   comes   on,   accompanied b

y   a   message   on   the   multifunction
 s

creen for a few seconds,
- when the vehicle is moving (speed above 6   mph   (10   km/h)),   this   warning   lamp   comes  
o

n,   accompanied   by   an   audible   signal   and  
a

  message   on   the   multifunction   screen   for  
a

  few   seconds. System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
Tailgate release
Unlocking
F Fold  back   the   rear   benchseat   to   gain  a
ccess   to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   tailgate.
Access

DS3_en_Chap07_visibilite_ed01-2014
B. Rear  wiper   selection   ring:
Rear wiper
If a significant accumulation of snow or i
ce   is   present,   or   when   using   a   tailgate  
b

icycle  
c
arrier,  
d
eactivate  
t
he  
a
utomatic  
r

ear   wiper   via   the   multifunction   screen  
c

onfiguration
 m
enu. park,
intermittent
 w

ipe,
wash-wipe   (set   duration).
Reverse gear
When reverse gear is engaged, the rear wiper w
ill   come   into   operation   if   the   windscreen  
w

ipers   are   operating.
Programming
The function is activated or deactivated via the
vehicle  configuration   menu.
This
  function   is   activated   by   default.
Windscreen wash
Pull the wiper stalk towards you. The windscreen wash, then the windscreen
wipers,
  operate   for   a   pre-determined   time.

201
DS3_en_Chap10_info-pratiques_ed01-2014
Important: if your vehicle's a
dblu e® tank is completely empty - w
hich
 
is
  confirmed   by   the   alert  
m

essages   and   the   impossibility   of  
s

tarting
 
the   engine,   you   must   add   at  
l

east
 
3.8   litres   (so   two   1.89   litre   bottles).If any additive is split or splashed, wash
immediately
  with   cold   water   or   wipe  
w

ith   a   damp   cloth.
If the additive has crystallised, clean it
off   using   a   sponge   and   hot   water.Important:
 i
n the event of a top-up after
a breakdown because of a lack of
additive ,   signalled   by   the   message   "Top
 u

p   emissions   additive:   Starting   prevented",
 y

ou   must   wait   around   5   minutes   before
 s

witching  
o
n  
t
he  
i
gnition,  
w
ithout opening
the driver's door, locking the vehicle
or introducing the key into the ignition
switch .
Switch   on   the   ignition,   then,   after
 1

0 seconds,   start   the   engine.
F
o
b

tain a bottle of a
dbl
ue
®. After first c
hecking
 
the
 
use-by
 
date,
  read   carefully  
t

he instructions on use on the label before
pouring
 
the
 
contents
 
of
 
the   bottle   into   your  
v

ehicle's
a
d
blu

e
® tank. N ever dispose of a
dbl
ue
® additive
bottles
 
in
 
the
 
household
 
waste.   Place  
t

hem
 
in
 
a
 
special
 
container   provided  
t

his
 
purpose
 
or
 
take
 
them
  to   your  
d

ealer.
F
 
A

fter
 
emptying
 
the
 
bottle,
 
wipe
 
away
 
any
 
s

pillage
 
around
 
the
 
tank
 
filler
 
using
 
a
 
damp
 
c

loth.
F
 
R

efit
 
the
 
blue
 
cap
 
to
 
the
 
tank
 
and
 
turn
 
it
 
a


6
th of a turn clockwise, to its stop.
F
 R
efit   the   black   cap   and   turn   it   a   quarter   of  
a

 
turn   clockwise   without   pressing.   Ensure  
t

hat the indicator on the cap lines up with
the
 
indicator   on   the   support.
F
 
D

epending   on   equipment,   return   the   spare  
w

heel   and/or   the   storage   box   to   the   bottom  
o

f
 
the   boot.
F
 
R

efit   the   boot   carpet   and   close   the   tailgate.
Practical information