ESP Citroen DS4 RHD 2015.5 1.G User Guide
[x] Cancel search | Manufacturer: CITROEN, Model Year: 2015.5, Model line: DS4 RHD, Model: Citroen DS4 RHD 2015.5 1.GPages: 436, PDF Size: 10.13 MB
Page 52 of 436

"Settings" menu
The functions available through this menu are detailed in the table below.Button Corresponding function Comments
Audio settings Adjustment of volume, balance...
Color schemes Choice of colour scheme.
Turn off screen Turns off the display in the the touch screen tablet (black screen).
Pressing the black screen restores the display.
System Settings Choice of units:
-
 
t
 emperature (°Celsius or °Fahrenheit)
-
 
d
 istance and fuel consumption (l/100 km, mpg or km/l).
Time/
d
a
 te Setting the date and time.
Languages Choice of language used: French, English, Italian, Spanish, German, Dutch, Portuguese, 
Polish, Turkish, Russian, Serb, Croat, Hungarian.
Screen settings Adjustment of the display settings (scrolling of text, animations...)
Calculator Display the calculator.
Calendar Display the calendar. 
Page 67 of 436

65
System allowing the doors to be locked and 
unlocked manually in the event of a malfunction 
of the central locking system or battery failure.
Back-up control
Locking the driver's door
F Insert the key in the door lock, then turn it to the rear.
You can also apply the procedure described for 
the passenger doors.
Unlocking the driver's door
F Insert the key in the door lock, then turn it  to the front.
Locking the front and rear 
passenger doors
F Open the doors.
F O n the rear doors, check that the child lock 
is not on (see the corresponding section).
F
 
R
 emove the black cap, located on the edge 
of the door, using the key.
F
 
I
 nsert the key in the socket without forcing 
it, then without turning it, move the latch 
sideways towards the inside of the door.
F
 
R
 emove the key and refit the cap.
F
 
C
 lose the doors and check that the vehicle 
has locked correctly from the outside.Unlocking the front and rear 
passenger doors
F Pull the interior door opening control.
Access  
Page 74 of 436

Locking the passenger doorsUnlocking the passenger  
doors
Changing the battery
F Open the doors.
F
 O n the rear doors, check that the child lock 
is not on (see the corresponding section).
F
 
R
 emove the black cap, located on the edge 
of the door, using the integral key.
F
 
I
 nsert the integral key in the socket without 
forcing it, then without turning it, move the 
latch sideways towards the inside of the 
d o o r.
F
 
R
 emove the integral key and refit the cap.
F
 
C
 lose the doors and check that the vehicle 
has locked correctly from the outside. F
 
P
 ull the interior door opening control.Battery ref.: CR2032 / 3 volts.
Battery replacement is signalled by the display 
of a message.
F
 
U
 nclip the cover using a small screwdriver 
at the cutout.
F
 
L
 ift off the cover.
F
 
R
 emove the flat battery from its location.
F
 
F
 it the new battery into its location 
observing the original direction of fitment.
F
 
C
 lip the cover onto the casing. 
Page 78 of 436

This system allows automatic simultaneous locking of the doors and boot as soon as the speed of the vehicle exceeds 6 mph (10 km/h).
Anti-intrusion security
OperationActivation /  d
e
 activation
You can activate or deactivate this function 
permanently.
F 
W
 ith the ignition on, press this button 
until an audible signal starts and a 
corresponding message is displayed.
If one of the doors or the boot is open, the 
automatic central locking does not take place.
Carrying long and voluminous 
objects
If you want to drive with the boot open, 
you should press the central locking 
button to lock the the doors. Other wise, 
every time the speed of the vehicle 
exceeds 6 mph (10 km/h), the locks 
will rebound and the alerts mentioned 
above will appear.
Pressing the central locking button unlocks 
the
 
vehicle.
Above 6 mph (10 km/h), this unlocking is 
te m p o r a r y. The state of the system stays in memory when 
switching off the ignition.
This is signalled by the sound of 
the locks rebounding, accompanied 
by illumination of this symbol in the 
instrument panel, an audible signal 
and the display of an alert message. 
Page 94 of 436

Rear seatsBench seat with fixed one-piece cushion and split backrests (1/3 - 2/3) which can be folded individually to adapt the load space in the boot.
F 
M
 ove the corresponding front seat for ward 
if necessary.
F
 
P
 osition the seat belt between the outer 
and centre head restraints to avoid 
trapping the belt when repositioning the 
seat backrest.
F
 
P
 lace the head restraints in the low 
position.
Folding the backrest
F Pull control 1 for wards to release the seat  back 2 .
F
 
F
 old the seat back 2 on to the cushion. F
 
S
 traighten the seat back 2 and secure it.
F  
C
 heck that the red indicator, located next to 
the control 1 , is no longer visible.
F  
P
 ut the seat belt back in place on the side 
of the seat backrest.
Repositioning the seat backrest
When repositioning the seat backrest, 
take care not to trap the seat belts. 
Page 96 of 436

Mirrors
Each fitted with an adjustable mirror glass 
permitting the lateral rearward vision necessary 
for overtaking or parking. They can also be 
folded for parking in confined spaces.
demisting - def rosting Adjustment
F Move control A to the right or to the left to 
select the corresponding mirror.
F
 
M
 ove control B in all four directions to 
adjust.
F
 
R
 eturn control A to the central position.
door mirrors
As a safety measure, the mirrors 
should be adjusted to reduce the blind 
spots.
Folding
F From outside: lock the vehicle using the remote control or the key.
F
 
F
 rom inside: with the ignition on, pull the 
control A in the central position rear wards.
If the mirrors are folded using control
 
A, 
t
hey will not unfold when the vehicle is 
unlocked. Pull again on control A .
If your vehicle is fitted with heated 
mirrors, the demisting-defrosting 
operates by switching on the heated 
rear screen.
Refer to the "Rear screen demist-defrost" 
section.
The rear screen demist - defrost can only 
operate when the engine is running. The objects observed are, in reality, 
closer than they appear.
Take this into account in order to 
correctly judge the distance of vehicles 
approaching from behind. 
Page 97 of 436

95
Unfolding
F From outside: unlock the vehicle using the remote control or the key.
F
 
F
 rom inside: with the ignition on, pull the 
control A in the central position rear wards.
The folding and unfolding of the door 
mirrors using the remote control can be 
deactivated by a CITROËN dealer or a 
qualified workshop.
If necessary the mirrors can be folded 
manually.
Automatic tilting in reverse gear
System which provides a view of the ground 
during parking manoeuvres in reverse gear.
Programming
F With the engine running, engage reverse  g e a r.
F
 
S
 elect and adjust the left-hand and right-
hand mirrors in succession.
The adjustment is stored immediately.
Switching on
F With the engine running, engage reverse  g e a r.
F
 
M
 ove control A to the right or to the left to 
select the corresponding mirror.
The glass of the mirror selected tilts 
downwards, in accordance with its 
programming.
Switching off
F Exit reverse gear and wait ten seconds.
or
F
 
R
 eturn control A to the central position.
The mirror glass returns to its initial position.
The mirror glass also returns to its initial 
position:
-
 
i
 f the speed exceeds 6 mph (10 km/h),
-
 
i
 f the engine is switched off.
Comfort  
Page 100 of 436

Recommendations for ventilation and air conditioning
If after an extended stop in sunshine, 
the interior temperature is very 
high, first ventilate the passenger 
compartment for a few moments.
Put the air flow control at a setting high 
enough to quickly change the air in the 
passenger compartment.
The air conditioning system does not 
contain chlorine and does not present 
any danger to the ozone layer.
In order for these systems to be fully effective, follow the operation and maintenance 
guidelines below:
F
 
T
o obtain an even air distribution, take care not to obstruct the exterior air intake grilles 
located at the base of the windscreen, the nozzles, the vents and the air outlets, as well 
as the air extractor located in the boot.
F
 
D
o not cover the sunshine sensor, located on the dashboard; this is used for regulation 
of the air conditioning system.
F
 
O
perate the air conditioning system for at least 5 to 10 minutes, once or twice a month 
to keep it in per fect working order.
F
 
E
nsure that the passenger compartment filter is in good condition and have the filter 
elements replaced regularly.
 W
e recommend the use of a combined passenger compartment filter. Thanks to its 
special active additive, it contributes to the purification of the air breathed by the 
occupants and the cleanliness of the passenger compartment (reduction of allergic 
symptoms, bad odours and greasy deposits).
F
 
T
o ensure correct operation of the air conditioning system, you are also advised to have 
it checked regularly as recommended in the maintenance and warranty guide.
F
 
I
f the system does not produce cold air, switch it off and contact a CITROËN dealer or 
a qualified workshop.
When towing the maximum load on a steep gradient in high temperatures, switching off the 
air conditioning increases the available engine power and so improves the towing ability. The condensation created by the air 
conditioning results in a discharge 
of water under the vehicle which is 
per fectly normal.
Stop & Start
The heating and air conditioning systems only work when the engine is running. To maintain 
a comfortable temperature in the passenger compartment, you can temporarily deactivate 
the Stop & Start system (see the corresponding section). 
Page 105 of 436

103
2. driver's side adjustment 4.  A utomatic visibility 
programme
For maximum cooling or heating of the 
passenger compartment, it is possible 
to exceed the minimum value 14 or the 
maximum value 28.
F
 
T
 urn control 2 or 3 to the left 
until
  "LO" is displayed or to  
the right until "HI"  is displayed.
See "Front demisting - defrosting".
3. Passenger's side adjustment
The driver and front passenger can 
each adjust the temperature to their 
requirements.
The value indicated on the display 
corresponds to a level of comfort and not to a 
temperature in degrees Celsius or Fahrenheit.
F
 
T
urn control 2 or 3 to the left or to the right 
respectively to decrease or increase this 
value.
A setting around the value 21 provides 
optimum comfort. However, depending on your 
requirements, a setting between 18 and 24 is 
normal.
You are advised to avoid a left / right setting 
difference of more than 3.
Manual operation
If you wish, you can make a different choice 
from that offered by the system by changing 
a setting. The the "AUTO"  indicator lamps go 
off; the other functions will still be controlled 
automatically.
F
 
P
 ressing the "AUTO"  button returns the 
system to completely automatic operation.
With Stop & Start, when demisting has 
been activated, the STOP mode is not 
available.
Comfort  
Page 114 of 436

This connection box comprises a USB port and 
a Jack auxiliary socket.For more information, refer to the 
corresponding part of the "Audio and 
telematics" section.
USB port
The USB port allows the connection of a 
portable device, such as a digital audio player 
of the iPod
® type or a USB memory stick.
The USB player reads your audio files, which 
are transmitted to your audio system and 
played via the vehicle's speakers.
The management of these files is from the 
steering mounted controls or the audio system.
USB Player
When connected to the USB port, the 
portable device charges automatically.
While charging, a message is displayed 
if the power consumption of the 
portable device exceeds the current 
delivered by the vehicle.
Jack auxiliary socket
The Jack auxiliary socket allows the connection 
of a portable device, such as a digital audio 
player, so that your audio files can be heard 
through the vehicle's speakers.
The management of these files is from the 
portable device. The USB also allows a telephone to be 
connected by a MirrorLink™ connection, so 
that use can be made in the touch screen tablet 
of certain applications on the telephone.
The connection of an electrical device 
not approved by CITROËN, such as a 
USB charger, may adversely affect the 
operation of vehicle electrical systems, 
causing faults such as poor telephone 
reception or inter ference with displays 
in the screens.
F
 
T
o use the cigarette lighter, press it in and wait 
a few seconds until it pops out automatically.
F
 
T
o connect a 12 V accessory 
 
(max power:
 
120 W), remove the cigarette 
lighter and connect a suitable adaptor.
You can use this socket to connect a telephone 
charger, a bottle warmer...
After use, put the cigarette lighter
 
back into 
place straight away.
Cigarette lighter / 12 V 
accessory socket