navigation system Citroen DS5 RHD 2016 1.G User Guide

The following table groups together the answers to the most frequently asked questions concerning your audio system.



QUESTION



ANSWER



SOLUTION


The route calculation is
not successful. The route settings may conflict with the current location (exclusion
of toll roads on a toll motor way). Check the route settings in the "Navigation"
menu.
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The Risk areas audible
warning does not work. The audible warning is not active. Activate audible warnings in the "Navigation"
menu.
The system does not
suggest a detour around
an incident on the route. The guidance criteria do not take account of TMC messages. Select the "Information" function in the list of
route settings.
I receive a Risk areas alert
which is not on my route. Other than guidance, the system announces all Risk areas
positioned in a cone located in front of the vehicle. It may provide
an alert for Risk areas located on nearby or parallel roads. Zoom in on the map to view the exact position of
the Risk areas. Select "On the route" to no longer
receive alerts other than navigation instructions
or to reduce the time for the announcement.
Frequently asked questions


Navigation

1 Audio and Telematics







DS Connect Nav


GPS satellite navigation - Connectivity - Multimedia audio - Bluetooth ®
telephone


Contents
First steps 2
Steering mounted controls 4
Menus 5
Voice commands 6
Navigation 12
Connected navigation 28
Connectivity 38
Radio Media 50
Te l e p h o n e 6 2
Settings 74
Frequently asked questions 84

The system is protected in such a way that it will only operate in
your vehicle.

The link below gives access to OSS (Open Source Software)
codes for the system.
http://www.psa-peugeot-citroen.com/oss
As a safety measure and because it requires sustained attention
by the driver, the pairing of a Bluetooth mobile telephone with
the Bluetooth hands-free system of your audio system must be
done with the vehicle stationary
and the ignition on.
The display of the energy economy mode message signals that
a change to standby is imminent. Refer to the Energy economy
(mode) section of your vehicle's handbook.

3 Audio and Telematics


Select the audio source (depending on
version):


- FM / DAB * / AM * stations.

- Smartphone via MirrorLink
TM
or CarPlay ®
.

- USB memory stick.

- CD player (located in front panel).

- Media player connected to the auxiliary
socket ( jack, cable not supplied).

- BluetoothTelephone connected by
Bluetooth * and using*
audio streaming.


* Depending on equipment.

Short-cuts: using the virtual buttons in the
upper band of touch screen, it is possible to
go directly to the selection of audio source,
the list of stations (or titles, depending on
the source), message notifications, emails,
mapping updates and, depending on services,
navigation notifications.

In very hot conditions, the volume may
be limited to protect the system. It may
go into standby (screen and sound off)
for at least 5 minutes.
The return to normal takes place when
the temperature in the passenger
compartment drops.



In the "Settings" menu you can create
a profile for just one person or a group
of people with common points, with
the possibility of entering a multitude of
settings (radio presets, audio sttings,
navigation history, contact favourites, ...);
these settings are taken into account
automatically.

Voice commands






First steps





Steering mounted controls





Information - Using the system


Press the Push To Talk
button and tell me what you'd
like after the tone.
Remember you can interrupt
me at any time by pressing this button.
If you press it again while I'm waiting for
you to speak, it'll end the conversation.
If you need to start over, say "cancel".
If you want to undo something, say
"undo".
And to get information and tips at
any time, just say "help". If you ask to
me do something and there's some
information missing that I need, I'll
give you some examples or take you
through it step by step.
There's more information available
in "novice" mode. You can set the
dialogue mode to "expert" when you
feel comfortable.

To ensure that voice commands are
always recognised by the system,
please obser ve the following
recommendations:


- speak in a normal tone without
breaking up words or raising your
voice.

- always wait for the "beep" (audible
signal) before speaking,

- for best operation, it is
recommended that the windows
and opening roof (if fitted) be
closed to avoid inter ference from
extraneous noises.

- before makking a voice command,
ask other passengers to not speak.


The voice commands, with a choice
of 12 languages (English, French,
Italian, Spanish, German, Dutch,
Portuguese, Polish, Turkish, Russian,
Arabic, Brazilian), are made using the
language previously chosen and set in
the system.

The voice commands in Arabic for:
"Navigate to address" and "Display POI
in the city", are not available.

Example of a "voice command" for
navigation:

"Navigate to address, 11 Regent
Street, London"
.

Example of a "voice command" for
the radio and media:

"Play ar tist" "Madonna"
.

Example of a "voice command" for
the telephone:

"Call David Miller"
.
Pressing the end of the lighting
control stalk activates the voice
commands function.

"Navigation" voice commands


These commands can be issued from any screen page after pressing the voice command or telephone button on the steering wheel, as long as
there is no telephone call in progress.

Depending on the country, give the destination instructions (address) in the language used by the system.


"Voice command"



Help message



Navigate home

To start guidance or add a stopover, say "navigate to" and then the address or contact
name.
For example, "navigate to address 11 Regent Street, London", or "navigate to contact, John
Miller".
You can specify if it's a preferred or recent destination. For example, "navigate to preferred
address, Tennis club", "navigate to recent destination, 11 Regent Street, London".
Other wise, just say, "navigate home".
To see points of interest on a map, you can say things like "show hotels in Banbury" or
"show nearby petrol station".
For more information you can ask for "help with route guidance".
Navigate to work


Navigate to preferred address <...>


Navigate to contact <...>


Navigate to address <...>


Show nearby POI <...>


Remaining distance

To get information about your current route, you can say "tell me the remaining time",
"distance" or "arrival time".
Try saying "help with navigation" to learn more commands.
Remaining time


Arrival time


Stop route guidance

1
1
8

Choosing a new destination


Select " Enter address
".

Select " See on map
" to select the
" Guidance criteria
".
Select the " Country
".

Press on " Confirm
" to select the
" Guidance criteria
".

Press on " Confirm
" to start
navigation.
Press on " Confirm
" to start
navigation.

And / Or
Press on Navigation
to display the
primary page.

Press on the " MENU
" button to go to
the secondary page.


Towards a new destination

Towards a recent destination


Select " My destinations
".
Press on Navigation
to display the
primary page.

Press on the " MENU
" button to go to
the secondary page.

Enter the " City
", the " Street
" and the
" Number
" and confirm by pressing
on the suggestions displayed.
Select the " Recent
" tab.

Select the address chosen in the list to display
the " Guidance criteria
".
To use the navigation system, it is
necessary to enter the " City
", the
" Street
" and the " Number
" using the
virtual keypad, or to take them from the
list of " Contacts
" or from the " History
"
of addresses.

Without confirmation of the street
number, you will be guided to one end
of the street.


Select " Position
" to see the point of
arrival geographically.

27 Audio and Telematics








TMC (Traffic Message
Channel)

TMC (Traffic Message Channel) is a
European standard on the broadcasting
of traffic information via the RDS
system on FM radio, transmitting traffic
information in real time.
The TMC information is then displayed
on a GPS Navigation system map and
taken into account straight away during
navigation, so as to avoid accidents,
traffic jams and closed roads.

The display of danger areas depends
on the legislation in force and
subscription to the ser vice.

29 Audio and Telematics


As a safety measure and because it
requires sustained attention by the
driver, using a smartphone when
driving is prohibited.
All operations must be done with the
vehicle stationary
.


Connected navigation connection


The principles and standards
are constantly changing. For
communication between your
smartphone and the system to operate
correctly, we recommend that you
keep your smar tphone's operating
system up to date, and the time and
date on your smar tphone and the
system correct.



The ser vices offered with connected
navigation are as follows.
A connected ser vices pack:


- Weather,

- Filling stations,

- Car park,

- Tr a f f i c ,

- POI, local search.
A Danger area pack. Activate the Bluetooth function on the
telephone and ensure that it is visible
to all (see the "Connectivity" section). Connect the USB cable.
The smartphone is in charge mode
when connected by USB cable.

The system is automatically
connected to the modem included
for the "Emergency or assistance
calls" ser vices and does not require
a connection provided by the user
via their smartphone.
On the arrival of "TOMTOM
TR AFFIC", the ser vices are
available.

For access to connected navigation,
you can use the connection provided
by the vehicle via the "Emergency or
assistance call" services or use your
smartphone as a modem.

Activate and enter settings for
sharing the smar tphone connection.



Restrictions of use:


- With CarPlay
®
, connection sharing
is only with a Wi-Fi connection.

- With MirrorLink
TM
, connection
sharing is only with a USB
connection.


The quality of ser vices depends on the
quality of the network connection. Select a Wi-Fi connection found by
the system and connect to it (see the
"Connectivity" section).

USB connection



Network connection provided by
the vehicle
Network connection provided by
the user



Bluetooth connection



Wi-Fi connection

7
28
27
26
29
30
31 Audio and Telematics



Level 1



Level 2



Level 3



Comments




Navigation


Select the orientation of the map; north up,
vehicle direction up or perspective.


Navigation



TOMTOM TR AFFIC

On connection of the system to a network,
"TOMTOM TR AFFIC" is displayed instead of
"TMC", for use of all of the options available, in
real time.


Navigation


Weather

Select the options.
The map display the route chosen, depending on
options.
Stations


Car park


Tr a f f i c


Danger area


Map color
Select the display mode for the map.

POI on map
Commercial
Select the POIs available. Geographic
Leisure
Public
Tr a v e l
Confirm Save the options.

View map
Modify city Select or change a city.
Zoom out.
Zoom in.

37 Audio and Telematics


To distribute information on the
declaration of danger zones, you
should check the option: " Allow
declaration of danger areas
".

You can download updates to the
system, danger zones and mapping,
from the brand's website.
The download procedure can be found
in the same place.



Declaration of "Danger
areas"

Press on Navigation
to display the
primary page.

Press on the "Declare a new danger
area" button located in the upper bar
of the touch screen.

Select the option " Ty p e
" to choose
the type de "Danger area".

Select the " Speed
" option and enter
it using the virtual keypad.

Press on " Confirm
" to save and
distribute the information.