Citroen JUMPY MULTISPACE DAG 2009.5 2.G Owner's Manual
Manufacturer: CITROEN, Model Year: 2009.5, Model line: JUMPY MULTISPACE DAG, Model: Citroen JUMPY MULTISPACE DAG 2009.5 2.GPages: 231, PDF Size: 11.46 MB
Page 191 of 231
9.46
0 3
1
2
3
6
5
4
N A V I G A T I O N - G U I D A N C E
SELECTING A DESTINATION
Press the NAV button again or select the NAVIGATION MENU function and p r e s s t h e d i a l t o c o n fi r m .
Select the DESTINATION INPUT f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
Select the letters of the town one by o n e c o n fi r m i n g e a c h t i m e b y p r e s s i n g the dial.
Once the country has been selected, turn the dial and select the town f u n c t i o n . P r e s s t h e d i a l t o c o n fi r m .
N A V I G A T I O N M E N U
DESTINATION INPUT
Insert the SD card in the front panel reader and leave it there to use the Navigation functions. The navigation SD card data must not be changed. The map data updates are available from CITROËN de alers.
A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e country selected can be accessed via the LIST butto n ontton on the virtual keypad.
Select the NEW DESTINATION INPUT function and press the dial to c o n fi r m .
NEW DESTINATION INPUT
The list of the last 20 destinations appears under the NAthe NAVIGATION MENU function.
Page 192 of 231
7
8
10
9
9.47
During guidance, pressing the end of the lights stalk repeats the last guidance instruction.
Repeat steps 5 to 7 for the STREET and N° functions.
Turn the dial and select OK. P r e s s t h e d i a l t o c o n fi r m .
Select the SAVE TO ADDRESS BOOK function to recoo record the a d d r e s s e n t e r e d i n a d i r e c t o r y fi l e . P r e s s t h e d i a l t o c o n fi r m t h e a d d r e s s e n t e r e d i n a d i r e c t o r y fi l e . P r e s s t h e d i a l t o c o n fi r m t h e selection. M y W a y p e r m i t s t h e r e c o r d i n g o f u p t o 4 0 0 0 c o n t a c t fi l e s . M y W a y p e r m i t s t h e r e c o r d i n g o f u p t o 4 0 0 0 c o n t a c t fi l e s .
To speed up the process, the post code can be ente redtered directly after selecting the POST CODE function. Use the virtual keypad to enter the letters and digits.
Select the route type: FAST ROUTE, SHORT ROUTE or OPTIMISED ROUTE and press the d i a l t o c o n fi r m .
Then select START ROUTE GUIDANCE and the press the dial to c o n fi r m .
You can zoom in/zoom out on the map using the dial . It is possible to scroll the map or select its orientation viaion via the short-cut menu of the FULL SCREEN MAP. Press the dial theial then select M A P S E T T I N G S o r Z O O M / S C R O L L a n d c o n fi r m .
It is also possible to select a destination FROM A DDREDRESS BOOK or FROM LAST DESTINATIONS.
FROM ADDRESS BOOKFROM LAST DESTINESTINATIONS
START ROUTE GUIDANCE
Page 193 of 231
9.48
0 3
5
6
7
1
2
3
4
N A V I G A T I O N - G U I D A N C E
ROUTE OPTIONS
Select the "Route dynamics" function. This function gives access to the " T r a f fi c i n d e p e n d e n t " o r " S e m i -dynamic" options.
Select the "Avoidance criteria" function. This function provides access to the AVOID options (motorways, toll roads, ferries).
Turn the dial and select the "Recalculate" function to take into account the route options selected. P r e s s t h e d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Route type" function and p r e s s t h e d i a l t o c o n fi r m . T h i s f u n c t i o n allows you to change the route type.
Select the "Route options" function a n d p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
ROUTE OPTIONS
ROUTE TYPE
ROUTE DYNAMICS
A V O I D A N C E C R I T E R I A
RECALCULATE
The route selected by the MyWay audio/telephone depends directly on the route options. Changing these options may change the route comple tely.
Page 194 of 231
5
6
7
1
2
3
4
9.49
A D D I N G A S T O P O V E R
Enter a new address, for example.
Once the new address has been entered, select OK and press the dial t o c o n fi r m .
Select "Recalculate" and press the d i a l t o c o n fi r m .
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Add stopover" function(5 stopovers maximum) and press the d i a l t o c o n fi r m .
Select the "Stopovers" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
S T O P O V E R S
A D D S T O P O V E R
ADDRESS INPUT
OK
The stopover must be completed or deleted in order for er for the guidance to continue to the next destination. Otherwise, the MyWa MyWay will always return you to the previous stopover.
Stopovers can be added to the route once the destination has been selected.
RECALCULATE
Page 195 of 231
9.50
0 3
1
2
3
4
7
8 5
6
N A V I G A T I O N - G U I D A N C E
SEARCHING FOR POINTS OF INTEREST
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "POI nearby" function to search for POIs around the vehicle.
Select the "POI search" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
POI SEARCH
POI NEARBY
Select the "POI in city" function to search for POIs in the city required. Select the country then enter the name of the city using the virtual keypad.
Select the "POI near route" function to search for POIs near the route.
Select the "POI in country" function to search for POIs in the country required.
Select the "POI near destination" function to search for POIs near the point of arrival of the route.
POI NEAR DESTINATION
POI IN COUNTRY
POI NEAR ROUTE
A list of cities present in the country selected can be accbe accessed via the LIST button on the virtual keypad.
POI IN CITY
The points of interest (POIs) indicate all of the service locations in the vicinity (hotels, various businesses, airports...).
Page 196 of 231
0 3
9.519.51
N A V I G A T I O N - G U I D A N C E
List of POIs
* According to availability in the country.
This icon appears when several POIs are grouped together in the same area. Zooming in on this icon shows details of the POIs.
Page 197 of 231
9.52
0 3
6
4
5
1
2
3
N A V I G A T I O N S E T T I N G S
Select the "Navi volume" function and turn the dial to set the volume of each v o i c e s y n t h e s i s e r ( t r a f fi c i n f o r m a t i o n , alert messages…).
Select "Set parameters for risk areas" to gain access to the "Display on map", "Visual alert" and "Sound alert" functions.
Select the "POI categories on Map" function to select the POIs to be displayed on the map by default.
N A V I V O L U M E
Press the NAV button.
Press the NAV button again or select the "Navigation" Menu function and p r e s s t h e d i a l t o c o n fi r m .
Select the "Settings" function and p r e s s t h e d i a l t o c o n fi r m .
" N A V I G A T I O N " M E N U
SETTINGS
POI CATEGORIES ON MAP
SET PARAMETERS FOR RISK AREAS
N A V I G A T I O N - G U I D A N C E
Contact a CITROËN dealer for details of the procedure for obtaining the HAZARDOUS LOCATION POIs. Updating of the HAZARDOUS LOCATION POIs requires a n SDHC (High Capacity) compatible reader.
Page 198 of 231
0 4
1
2
5
4
3
9.53
TRAFFIC INFORMATION
CONFIGURE THE FILTERING AND
DISPLAY OF TMC MESSAGES
T h e n s e l e c t t h e r a d i u s o f t h e fi l t e r (in miles (km)) required in accordance with the route, press the dial to c o n fi r m . When all of the messages on the route are selected, the addition of a g e o g r a p h i c a l fi l t e r i s r e c o m m e n d e d (within a radius of 3 miles (5 km) for example) to reduce the number of messages displayed on the map. T h e g e o g r a p h i c a l fi l t e r f o l l o w s t h e movement of the vehicle.
Press the TRAFFIC button again or s e l e c t t h e " T r a f fi c " M e n u f u n c t i o n a n d p r e s s t h e d i a l t o c o n fi r m .
G E O . F I L T E R
Press the TRAFFIC button.
T h e fi l t e r s a r e i n d e p e n d e n t a n d t h e i r r e s u l t s a r e c u m u l a t i v e . W e r e c o m m e n d a fi l t e r o n t h e r o u t e a n d a fi l t e r a r o u n d t h e v e h i c l e o f : - 2 m i l e s ( 3 k m ) o r 3 m i l e s ( 5 k m ) f o r a r e g i o n w i t h h e a v y t r a f fi c , - 6 m i l e s ( 1 0 k m ) f o r a r e g i o n w i t h n o r m a l t r a f fi c , - 30 miles (50 km) for long journeys (motorway).
Select the "Geo. Filter" function and p r e s s t h e d i a l t o c o n fi r m .
T h e l i s t o f T M C m e s s a g e s a p p e a r s u n d e r t h e " T r a f fi c " M e n u s o r t e d T h e l i s t o f T M C m e s s a g e s a p p e a r s u n d e r t h e " T r a f fi c " M e n u s o r t e d in order of proximity.
S e l e c t t h e fi l t e r o f y o u r c h o i c e :
MESSAGES ON ROUTE
ONLY WARNINGS ON ROUTE
ALL WARNING MESSAGES
ALL MESSAGES
The messages appear on the map and on the list. To exit, press ESC.
"TRAFFIC" MENU
The TMC icon, at the bottom left of the scthe screen, may appear in 3 different forms: - No TMC station available, - TMC station available, no message on re on route, - TMC station available and messages onges on route (if guidance is active).
Page 199 of 231
9.54
11
2
3
0 5
SELECTING A STATION
When the current radio station is displayed on the screen, press the dial.
The radio source short-cuts menu appears and providesovides access to the following short-cuts:
Select the function required and press t h e d i a l t o c o n fi r m t o g a i n a c c e s s t o the corresponding settings.
TRAFFIC INFO (TA)
The RDS, if displayed, allows you to continue listening tning to the same station by automatic retuning to alternative freque ncies.ncies. However, in certain conditions, coverage of an RDS station may not y not be assured throughout the entire country as radio stations do not conot cover 100 % of the territory. This explains the loss of reception of the stathe station during a journey.
The external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS following mode. This ph enomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a failure of the audio equipment.
RDS - REGIONAL MODE - TRAFFIC INFO
Press the RADIO button to display the list of stations received locally sorted in alphabetical order. Select the station required by turning t h e d i a l a n d p r e s s t o c o n fi r m .
While listening to the radio, press one of the buttons to select the previous or next station on the list.
Press one of the buttons on the numeric keypad for moor more than2 seconds to store the current station. Press the button on the numeric keypad to recall the stothe stored radio station.
RDS
RADIOTEXT
R E G I O N A L P R O G .
AM
RADIO
A long press of one of the buttons starts the automatic search for a station with a lower or higher frequency.
Page 200 of 231
0 6
9.55
MUSIC MEDIA PLAYERS
C D , M P 3 / W M A C D
I N F O R M A T I O N A N D A D V I C E
In order to be able to play a recorded CDR or CDRW, wRW, when recording it is preferable to select the ISO 9660 level 1, vel 1, 2 or Joliet standard. If the disc is recorded in another format it may not be plat be played correctly. It is recommended that the same recording standard is ard is always used for an individual disc, with as low a speed as possible (4ible (4x maximum) for optimum sound quality. In the particular case of a multi-session CD, the Joliet stoliet standard is recommended.
T h e M y W a y w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n " . m p 3 " w i t h T h e M y W a y w i l l o n l y p l a y a u d i o fi l e s w i t h t h e e x t e n s i o n " . m p 3 " w i t h a speed of between 8 Kbps and 320 Kbps and the extee extension ".wma" with a speed of between 5 Kbps and 384 Kbps.
The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 A 2.5 Audio Layer 3 and the WMA format, an abbreviation of Windows Medi Media Audio and the property of Microsoft, are audio compression standastandards which p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c . p e r m i t t h e r e c o r d i n g o f s e v e r a l t e n s o f m u s i c fi l e s o n a s i n g l e d i s c .
It also supports the VBR (Variable Bit Rate) mode. N o o t h e r t y p e o f fi l e ( . m p 4 , . m 3 u . . . ) c a n b e p l a y e d .
I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f I t i s a d v i s a b l e t o r e s t r i c t fi l e n a m e s t o 2 0 c h a r a c t e r s , w i t h o u t u s i n g o f special characters (e.g.: " " ? ; ù) to avoid any p laying anying and displaying problems.