maintenance DACIA SOLENZA 2004 User Guide

62
AIR CONDITIONING
62 - 9
Cold air blowing device (DSAF)
Disconnect the climate maintenance blower
connector ( 11) (pull the red part towards arrow
A).
Di smount the attachment screws of the
steering wheel half-case and release from clips
detaching. Dismount the upper part dashboard and
release it from clips.
Dismount the radio-cassettes player. Disconnec t t he c entra l l ocking swi tch
connector (if the vehicle is provided with central
locking). Dismount the right air vent.
Dismount the DSAF attachment screws on
cowl panel and a ttachment screws on climate
maintenance box and release it.
Di smount the attachment screws ( 9) o f the
connection pipe ( 10) on the distributor of RACV
AC-ventilation air and release it.
REMOU NT I NG
Perform the dismounting operations in the
reverse order, taking into consideration that filter
reservoir is to be mounted the last. Fill the air conditioning unit with refrigerant
fluid HFC 134a (0,600 Kg).
86
11
Connector
Pin Denomination 1 Control + air recycling
2 Control + air recycling
3 Blower control speed 1
4 Blower control speed 2
5 Blower control speed 3
9 Climate control blower speed signal
10 Supply + after contact
11 Supply + after contact
12 Blower control speed 4
14 Mass
15 Mass
915
5 1
vnx.su

71
CARRIAGE BODY INSIDE TRIMS
71 - 7
DISMOUNTING
Dismount :
- dashboard (see chapter 57 );
- driving post cross beam (see chapter 42 );
- centra l console ( see chapter 58);
- distributor of t he air ventilation climate maintenance RACV ( see chapter 61);
- attaching scre w of the steering column support on the dri ving post cross-beam;
- pedals support ( see chapter 37);
- partially the floor carpet ( i n the noise absorbent coveri ng area).
Detach the noise absorbent (2 ) from the cowl panel clips (1).
Cowl panel noise absorbent
REMOUNTING
Perform in the reverse orde r the dismounting opera tions.
A maximum 3 daN clips attaching effort is necessary for the noise absorbent attach-
ment clips.
21
vnx.su

CARRIAGE BODY INSIDE TRIMS
71
71 - 8
1 – cockpit carpe t
2 – clip
DISMOUNTING
Di
smount :
- front seats ( see chapter 78 );
- rear bench seat (see chapter 78);
- front seat belts lockers ( see chap-
ter 59 )
- centra l console ( see chapter 58);
- distributor of the air ventilation/cli-
mate maintenance RACV (see chapter 61 );
- front safety belts at lower part;
- accelera tion pedal limiter.
D etach from clips the cockpit carpet ( 1).
REMOUNTING
Perform the dismounting opera tions in the
reverse order.
The clips attaching is to be performed with
a maximum forc e of 3 daN.
Cockpit carpet
1
2
vnx.su

89
ELECTRIC DIAGRAMS
89 - 2
The fuse box from the engine compartment is presented in Chapter 9, that contains information
about its location on the vehicle and the functional purpose of the relays and fuse placed on it.
The functional codes of the wires are detailed explained in Chapter 12. FUNCTIONAL DIAGRAMS INTERPRETATION
The functional diagram information included in Chapter 7 are to be i nterpreted taking i nto
consideration the explanation referring to the following example:
1= vehicle class
2= manufacturing year
3= functional electric diagram denomination
4= equipment differentiation criteria for identifying the functional electric diagram ˙
5= electric connector colour ˝
6= connector graphical representation
7= electric component index number
8= number of the fuse box on which the relay or safety fuse is m ounted
9= safety fuse identification on fuse box
10 = safety fuse value
11 = identification of wiring joints
12 = electric mass identification
13 = electric connection colour between wiring ˝
14 = electric connection identification
15 = electric connection graphical representation
16 = symbol, pages containing functional diagrams
17 = wire function code
18 = wire colour ˝
19 = functional diagram number
OBSERVATION:
1. The area ( 4) specifies the differentiating elements serving to the various functional diagrams
identification, considering the following symbols:
ABCO01 = driver’s airbag
CA = climate maintenance with air conditioning
CHAUFO = climate maintenance without air conditioning
CPE = Electric locking/unlock ing doors control
DA = assisted power steering
E0, E1, E2 = levels of equipment
LV E = front windows electric control
___ ___________________________________________________________________________
General
vnx.su

89
ELECTRIC DIAGRAMS
89 - 2
The fuse box from the engine compartment is presented in chapter 9, that contains information
about its location on the vehicle and the functional purpose of the relays and fuse placed on it.
The functional codes of the wires are detailed explained in chapter 12.
FUNCTIONAL DIAGRAMS INTERPRETATION
The functional diagra m inform ation included in c hapter 7 is to be interpreted taking into
consideration the explanation referring to the following example:
1 = vehicle class
2 = manufacturing year
3 = functional electric diagram denomination
4 = equipment differentiation criteria for identifyin g the functional electric diagram ˙
5 = electric connector colour ˝
6 = connector graphical representation
7 = electric component index number
8 = number of the fuse box on which the relay or safety fuse is mounted
9 = safety fuse identification on fuse box
10 = safety fuse value
11 = identification of wiring joints
12 = electric mass identification
13 = electric connection colour between wiring ˝
14 = electric connection identification
15 = electric connection graphical representation
16 = symbol (logo), pages containing functional diagrams
17 = wire function code
18 = wire colour ˝
19 = functional diagram number
OBSERVATION
1. The area (4) specifies the differentiating elements serving to the various functional
diagrams identification , considering the following symbols:
ABCO01 = driver’s airbag CA = climate maintenance with air conditioning
CHAUFO = climate maintenance without air conditioning
CPE = Electric locking/unlock ing doors control
DA = assisted power steering
E0, E1, E2 = levels of equipment
LV E = front windows electric control
General
vnx.su