AUX DACIA SOLENZA 2004 Repair Manual

FRONT AX LES ELEMENTS
31
31 - 1
Chara cteristics
The front axle is composed of two joint half axles with independents wheels, designed for the
suspension type Mc.Pherson.
The joints of front half axle arm are done by means of an elastic bearing (chassis side) and by
means of a suspension ball joint (wheel side)
The transmission of the motion to the wheels is done by means of two planetary a xles, not
equal, with homocinetic tripod joints.
The wheel hub is assembled in the steering knuckle by means of a sealed bearing.
The brake disks a re ventilated.
TIGHTENING MOMENTS (daNm)
Wheel attachment screw 7.5
Suspension arm shaft nuts 10.5
Attachment nut of the ball joint screw 6.2
The nut of the attachment screw of the steering knuckle with the shock absorber 10.5
Transmissio n nut 28.0
Steering ball joint nut 4.0
Attachment anti roll bar screws 4.0
Connecting strap screws 2.7
Attachment screws of the suspension ball joint on the arm 7…..7.5
Attachment screws of the disk on the hub 1.4
Aux.connecting rod- assembled connecting rod end stop nut 5.0
Assembled connecting rod end- rack joint body 5.0
vnx.su

33
REAR A XLES ELEMENTS
33 - 11
Brake shoes
C
B
H
Dismount
the auxiliary connecting rod ( B)
connection from the adjustment lever (C).
Bring the adjustment lever in the initial
position. Rotate the compre ssion shoe with 90
degrees. Dismount the lower spring.
Remove the (front) compression shoe, then
the tensioning one.
R EMOU NT I NG
Perform in reverse order the dismount-
ing operations.
REMARK:
The adjustment of the device for the
automatic clearance taking over, is de-
pendi ng of the spring tensi oning (E),
that i s caught between the rear shoe and
the auxiliary connecting rod.
Measure the value H=1mm, between the
auxiliary connecting rod and the front shoe. If
the value H is not correct, replace t he auxil-
iary connecting rod spring ( E) and the shoes
return springs.
vnx.su