seat adjustment DACIA SOLENZA 2004 Repair Manual

THE M ECHANICAL ELEMENTS CONTROLS
37
37 - 16
GEARS CONTROL ADJUSTMENT
This is to be performed after mounting the engine-gearbox assembly and the assembly lever-
control case every time when : -dismounting of the engine-gearbox assembly, the control bar or the assembly lever-control
case;
- establishing of failures such as: gear change impossibility or unexpected gear uncoupling,
gears blocking.
For the gear control adjustment the CV 550 device i s to be used.
M ount the CV 550 device on the assembly lever- control case.
A ttach the control bar to the c ontrol lever end.
Place the gear lever in the device seat and fix it in this position by means of the device handle.
Tighten the attachment screw 1 of the bar to the lever at the required moment of 1.2 daNm.
Dismount the CV 550 device from the control box.
Check the gears coupling.
G ears control
SPECIAL TOOLS
CV 550 Linkage adjusting device
vnx.su

INSIDE ACCESSORIES
Dashboa rd .......................................................... 57-1
Inside rear view mirror ..................................... 57-8
S un visors ........................................................... 57-9
Central console ................................................. 57-10
Handbrake case ................................................ 57-11
Turning handle .................................................. 57-12
SECU RITY ELEMENTS
Fr ont safety belts ............................................... 59 - 1
Re ar safety belts ............................................... 59 - 2
HEATING
General .............................................................. 61-1
Operating principle ........................................... 61-2
C limate c ontrol unit .......................................... 61-4
Ve n t ilation- climate control air
distributor (RACV) .......................................... 61-5
Heating radiator ................................................ 61-6
C ontrol panel ..................................................... 61-7
C ontrol cable s ................................................... 61-9
Motor fan control resistance............................ 61-10
Diagnose ............................................................. 61-11
AIR CONDITIONING
General ............................................................... 62-1
Draining – filling the refrigerant circuit ......... 62-3
Air conditioning unit operating diagram ........ 62-4
Operating principle ........................................... 62-5
Part icles filter .................................................... 62-7
Cold ai r blowing device (DSAF) ...................... 62-8
Evaporator ........................................................ 62-10
Control panel ..................................................... 62-11
Comp ressor ........................................................ 62-12
C ondenser .......................................................... 62-13
Pressu re controller ............................................ 62-14
F ilter reser voir ................................................... 62-15
Unit piping ......................................................... 62-16
Thermostatic expansion valve ......................... 62-19
C limate c ontrol blower ..................................... 62-20
Blow er control resistance .................................. 62-21
Rec ycling flap motor fan ................................. 62-22
Diagnose ............................................................. 62-23
CARRIAGE BODY SEALING
Ca rriage body se aling ....................................... 64 - 1 OPENINGS SEALING
Opennings sealing ............................................. 65 - 1 GLASSES SEALING
Glasses gaskets .................................................. 66 - 1
Inside wipers ..................................................... 66 - 2
Outside wipers ................................................... 66 - 3
Fr ont door glass channel ................................. 66 - 4
Rear door gla ss run channel ............................ 66 - 5
CARRIAGE BODY INSIDE TRIMS
C arriage body inside trims ............................. 71-1
Upper front pillar trim ..................................... 71-2
Mi ddle pillar trim ............................................. 71-3
Rear quarter panel tr im ................................... 71-4
R oof lining ......................................................... 71-5
Trunk carpet ...................................................... 71-6
Cowl panel noise absor bent ............................. 71-7
Cockpit carpet ................................................... 71-8
LATERAL OPENINGS TRIMS
Fr ont door panel ................................................ 72-1
R ear door panel ................................................. 72-2
REAR TABLE
Lateral table ....................................................... 74-1 FRONT SEATS SLIDES GUIDES
Fr ont seat ........................................................... 75-1
Fr ont seats slides guide s ................................... 75-2
SEATS / R EAR BENCH
R ear bench ......................................................... 76-1
BATTERY - FRONT HEADLIGHTS
Battery ... ............................................................ 80-1
Headlamp assembly .......................................... 80-4
F og projectors ................................................... 80-5
Bulbs ... ................................................................ 80-6
Headlamps adjustment .................................... 80-9
Repl acement of the headlamps mechanic
adjustment control ........................................... 80-1157
Mechanisms and accesoires5
59
61
62
Climatisation6
64
65
66
71
72
74
75
76
80
Echuipment electr ique8
Garnishing and tack room7
vnx.su

75
75 - 1
FRONT SEATS SLIDES GU IDES
Front seat
75 010
TIGHTENING
MOMENTS(daNm)
Fr ont seat attachment screws 2,1
DISMOUNTIN G
Dismount the attachment screws (1) of the
front seat on the side and central cross mem-
ber in the front part.
By acting upon the lever (2) in the arrow
direction, bring the seat in front position and
dismount the attachment screws (3) of the front
seat on the side and re ar c ross-beam in the
rear part.
1 2 3
4
5
Release the front chair.
Remove the headrests by simultaneously
pushing of the buttons (4) attached on the head-
rests sleeves.
R EMOU NT I NG
Perform the dismounting operations in the
reverse order.
The front seat attachment screws are to be
tighten to the required moment of 2,1 daNm.
ADJUSTMENTS
The front seats, have two possibilities of ad-
justment:
- front or rear longitudinal movement,
w hich can be performed by lever’s operation
(2); - seat back reclining up to the horizontal
position, by rotating the round button (5).
vnx.su