differential DACIA SUPERNOVA 2004 User Guide

CV JH3 - 05021
MANUAL GEARBOX
21 - 26
The assembling surfaces must be flat (small
imperfections can be eliminated by means of a thin
file). Place the a xle and 1-2 fork assembled on the 1-
2 sliding collar of the secondary shaft.
The two shafts (primary and secondary) are taken
together with the fork and 1-2 axle and positioned
at the same time into the clutch – differential crank-
case.
The c rown and the secondary shaft are rotated
until the end of the secondary shaft fits into the bear-
ing.
Mounting the blocking roll of the shaft ˚ (A).
With the 1 – 2 axle in free position, the following
are mounted:
- synchronizing a ssembly 3 – 4 together axle
and 3 – 4 fork;
- mount the for pin 3 – 4 by means of the CV
949 device. Mount the blocking roll of the 5 th step axle ( B).
A
B
GEARBOX DISMOUNTING
CRANCKASE ASSEMBLING
vnx.su