wheel bolts DACIA SUPERNOVA 2004 Repair Manual

35
WHEELS AND TYRES
CARACTERISTICSRIMS
The wheels identification marking is represented in two ways:
- engraved marking for steel rims
- cast marking for aluminum rims
The marking enables acknowledgment of the main wheels dimensions criteria. This marking
may be:
complete,
Example: 5
1/2 B 13 4 CH 46 ; 5 1/2 J 13 4 H2 46
or simplified,
Example: 5
1/2 B 13 ; 5 1/2 J 13 H2
The wheel bolts (studs) are situated on a diameter of 100 mm.
Maximum axial runout : 1 mm measured on the rim edge ( in G ).
Maximum radial runout : 1 mm measured on the supporting side of the tires beads.
AB C D EF
Whe els Width The rim Æ Nominal Number of Tire Offset
type (in inches) edge profile rim (in inches) wholes under staffing profile (in mm) the tire bead
5
1/2B13 5 1/2B1 34C H46
4 CH48
5
1/2J13 5 1/2J1 34H 246
4H 2
35 - 1
vnx.su