oil viscosity DODGE CALIBER 2009 1.G Owners Manual

While cruising, brief full-throttle acceleration within the
limits of local traffic laws, contributes to a good break-in.
Wide-open throttle acceleration in low gear can be detri-
mental and should be avoided.
The engine oil installed in the engine at the factory is a
high-quality energy conserving type lubricant. Oil
changes should be consistent with anticipated climate
conditions under which vehicle operations will occur.
The recommended viscosity and quality grades are
shown under “Engine Oil”, under “Maintenance Proce-
dures” in section 7 of this manual. NON-DETERGENT
OR STRAIGHT MINERAL OILS MUST NEVER BE
USED.
A new engine may consume some oil during its first few
thousand miles (kilometers) of operation. This should be
considered as a normal part of the break-in and not
interpreted as an indication of difficulty.
SAFETY TIPS
Transporting Passengers
NEVER TRANSPORT PASSENGERS IN THE CARGO
AREA.
WARNING!
•It is extremely dangerous to ride in a cargo area,
inside or outside of a vehicle. In a collision, people
riding in these areas are more likely to be seri-
ously injured or killed.
•Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat
belts.
•Be sure everyone in your vehicle is in a seat and
using a seat belt properly.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71
2

American Petroleum Institute (API) Engine Oil
Identification Symbol
This symbol means that the oil has
been certified by the American
Petroleum Institute (API). The
manufacturer only recommends
API Certified engine oils.
Engine Oil Viscosity (SAE Grade)
SAE 5W-20 engine oil is recommended for all operating
temperatures. This engine oil improves low temperature
starting and vehicle fuel economy. Your engine oil filler
cap also states the recommended engine oil viscosity
grade for your engine.Lubricants which do not have both the engine oil certi-
fication mark and the correct SAE viscosity grade num-
ber should not be used.
Synthetic Engine Oils
You may use synthetic engine oils provided the recom-
mended oil quality requirements are met, and the recom-
mended maintenance intervals for oil and filter changes
are followed.
Materials Added To Engine Oils
The manufacturer strongly recommends against the ad-
dition of any additives (other than leak detection dyes) to
the engine oil. Engine oil is an engineered product and its
performance may be impaired by supplemental
additives.
Disposing Of Used Engine Oil and Oil Filters
Care should be taken in disposing of used engine oil and
oil filtersfrom your vehicle. Used oil and oil filters,
indiscriminately discarded, can present a problem to the
346 MAINTAINING YOUR VEHICLE

Malfunction Indicator Light (Check Engine) . . 175,342
Manual, Service......................... 405
Manual Transaxle .................. 249,251,362
Downshifting ......................... 253
Fluid Level Check ..................... 362
Frequency of Fluid Change ............... 362
Lubricant Selection ..................... 362
Map/Reading Lights ..................... 130
Master Cylinder (Brakes) .................. 359
Mirrors ................................ 79 Automatic Dimming ..................... 80
Electric Powered ....................... 81
Outside .............................. 80
Rearview ............................. 79
Vanity ............................... 83
Modifications/Alterations, Vehicle ............. 7
Monitor, Tire Pressure System ............... 293
Mopar Parts ......................... 343,404
Multi-Function Control Lever ............... 126New Vehicle Break-In Period
................ 70
Occupant Restraints (Sedan) ................. 36
Octane Rating, Gasoline (Fuel) .............. 301
Odometer ............................. 174
Trip ............................. 174,176
Oil Change Indicator ..................... 174
Oil, Engine ......................... 344,377
Capacity ............................ 377
Change Interval ....................... 345
Checking ............................ 344
Disposal ............................ 346
Filter ............................... 347
Identification Logo ..................... 346
Materials Added to ..................... 346
Recommendation ................... 345,377
Synthetic ............................ 346
Viscosity ............................ 346
Onboard Diagnostic System ..............341,342
INDEX 419
10