ECU DODGE CHARGER SRT 2007 6.G Owner's Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 2007, Model line: CHARGER SRT, Model: DODGE CHARGER SRT 2007 6.GPages: 350, PDF Size: 5.51 MB
Page 194 of 350

The gear shifting process is continuously adapted, de-
pendent on the driving style, the driving situation and
the road characteristics.
NOTE:
²
After selecting any driving position, wait a moment to
allow the gear to engage fully before accelerating,
especially when the engine is cold.
²If there is a need to restart the engine, be sure to cycle
the key to the LOCK position before restarting. Trans-
mission engagement may be delayed up to 10 seconds
after restart if the key is not cycled to the LOCK
position first.
²The electronically controlled transmission provides a
precise shift schedule. The transmission electronics are
self-calibrating. Therefore, the first few shifts on a new
vehicle may be somewhat abrupt or soft until after the
break-in period. This is a normal condition, and pre-
cision shifts will develop within a few shift cycles.The selector lever is automatically locked while in the P
(Park) position. To move the selector lever out of the P
(Park) position, the brake pedal must be firmly depressed
before the shift lock will release.
Shift the selector lever to the desired position only when
the engine is idling normally and the brake pedal is
applied. Do not release the brake until ready to drive. The
vehicle may otherwise accelerate quickly when the selec-
tor lever is in D (Drive) or R (Reverse) position.
WARNING!
Unintended movement of a vehicle could injure
those in and near the vehicle. As with all vehicles,
you should never exit a vehicle while the engine is
running. Before exiting a vehicle, you should always
shift the vehicle into P (Park), remove the key from
the ignition, and apply the parking brake. Once the
key is removed from the ignition, the transmission
selector lever is locked in the P (Park) position,
securing the vehicle against unwanted movement.
Furthermore, you should never leave children unat-
tended inside a vehicle.
194 STARTING AND OPERATING
Page 200 of 350

6. Move the selector lever to the desired range. If the
problem is no longer detected, the transmission will
return to normal operation.
NOTE:Even if the transmission can be reset, we
recommend that you visit a dealer at your earliest
possible convenience. Your dealer has diagnostic equip-
ment to determine if the problem could recur.
Have the transmission checked at your authorized dealer
as soon as possible.
If the problem has been momentary, the transmission can
be reset to regain all forward gears.
Permanent Transmission Limp Home Mode
Permanent Limp Home Mode will be activated if the
transmission enters temporary Limp Home Mode three
times. Follow the reset procedure described under ªTem-
porary Transmission Limp Home Modeº in this section.
In Permanent Limp Home Mode, P (Park), R (Reverse),
and N (Neutral) will continue to operate. Second gear
will operate in the D (Drive) shifter position. The mal-
function indicator light may illuminate.
AUTOSTICKT
Autosticktis a driver-interactive transmission that offers
manual gear shifting to provide you with more control of
the vehicle. Autosticktallows you to maximize engine
braking, eliminate undesirable upshifts and downshifts,
and improve overall vehicle performance. This system
can also provide you with more control during passing,
city driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations.
AutostickTOperation
By placing the selector lever in the D (Drive) position, it
can be moved from side to side. This allows the driver to
select a higher or lower range of gears. Moving the
selector lever to the Left (-) triggers a downshift and to
the Right (+) an upshift. The gear position will display in
the instrument cluster on the transmission range indica-
tor.
NOTE:
²
In Autosticktmode, the transmission will only shift
up and down when the driver manually moves the
selector lever Right (D+) or Left (D-).
200 STARTING AND OPERATING
Page 242 of 350

CAUTION!
²Damage to the fuel system or emission control
system could result from using an improper fuel
tank filler tube cap (gas cap).
²A poorly fitting gas cap could let impurities into
the fuel system.
²A poorly fitting gas cap may cause the Malfunc-
tion Indicator Light to turn on.
²To avoid fuel spillage and overfilling, do not ªtop
offº the fuel tank after filling. When the fuel
nozzle ªclicksº or shuts off, the fuel tank is full.
WARNING!
²Never have any smoking materials lit in or near
the vehicle when the gas cap is removed or the
tank filled.
²Never add fuel to the vehicle when the engine is
running.
²A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle. You
could be burned. Always place gas containers on
the ground while filling.
NOTE:
²
Tighten the gas cap until you hear a ªclickingº sound.
This is an indication that the gas cap is tightened
properly. The Malfunction Indicator Light in the in-
strument cluster may turn on if the gas cap is not
secured properly. Make sure that the gas cap is tight-
ened each time the vehicle is refueled.
²When the fuel nozzle ªclicksº or shuts off, the fuel
tank is full.
242 STARTING AND OPERATING
Page 244 of 350

²Month Day and Hour of Manufacture (MDH)
The bar code allows a computer scanner to read the
Vehicle Identification Number (VIN).
Gross Vehicle Weight Rating (GVWR)
The GVWR is the total allowable weight of your vehicle.
This includes driver, passengers, and cargo. The total
load must be limited so that you do not exceed the
GVWR.
Gross Axle Weight Rating (GAWR)
The GAWR is the maximum capacity of the front and rear
axles. Distribute the load over the front and rear axles
evenly. Make sure that you do not exceed either front or
rear GAWR.
WARNING!
Because the front wheels steer the vehicle, it is
important that you do not exceed the maximum front
or rear GAWR. A dangerous driving condition can
result if either rating is exceeded. You could lose
control of the vehicle and have an accident.
Overloading
The load carrying components (axle, springs, tires,
wheels, etc.) of your vehicle will provide satisfactory
service as long as you do not exceed the GVWR and front
and rear GAWR.
The best way to figure out the total weight of your
vehicle is to weigh it when it is fully loaded and ready for
operation. Weigh it on a commercial scale to insure that it
is not over the GVWR.
Figure out the weight on the front and rear of the vehicle
separately. It is important that you distribute the load
evenly over the front and rear axles.
Overloading can cause potential safety hazards and
shorten useful service life. Heavier axles or suspension
components do not necessarily increase the vehicle's
GVWR.
Loading
To load your vehicle properly, first figure out its empty
weight, axle by axle and side by side. Store heavier items
down low and be sure you distribute their weight as
evenly as possible. Stow all loose items securely before
244 STARTING AND OPERATING
Page 283 of 350

²Make sure that the radiator and coolant recovery
bottle overflow hoses are not kinked or obstructed.
²Keep the front of the radiator clean. If your vehicle is
equipped with air conditioning, keep the front of the
condenser clean, also.
²Do not change the thermostat for summer or winter
operation. If replacement is ever necessary, install
ONLY the correct type thermostat. Other designs may
result in unsatisfactory coolant performance, poor gas
mileage, and increased emissions.
Hoses And Vacuum/Vapor Harnesses
Inspect surfaces of hoses and nylon tubing for evidence
of heat and mechanical damage. Hard or soft spots,
brittle rubber, cracking, tears, cuts, abrasions, and exces-
sive swelling indicate deterioration of the rubber.
Pay particular attention to those hoses nearest to high
heat sources such as the exhaust manifold. Inspect hose
routing to be sure hoses do not come in contact with any
heat source or moving component which may cause heat
damage or mechanical wear.Insure nylon tubing in these areas has not melted or
collapsed.
Inspect all hose connections such as clamps and cou-
plings to make sure they are secure and no leaks are
present.
Components should be replaced immediately if there is
any evidence of wear or damage that could cause failure.
Fuel System
The Electronic Fuel Injection high-pressure fuel system's
hoses and quick connect fittings have unique material
characteristics that provide adequate sealing and resist
attack by deteriorated gasoline.
You are urged to use only the manufacture specified
hoses with quick connect fittings, or their equivalent in
material and specification, in any fuel system servicing. It
is mandatory to replace any damaged hoses or quick
connect fittings that have been removed during service.
Care should be taken in installing quick connect fittings
to insure they are properly installed and fully connected.
See your authorized dealer for service.
MAINTAINING YOUR VEHICLE 283
7
Page 284 of 350

Brake System
In order to assure brake system performance, all brake
system components should be inspected periodically.
Suggested service intervals can be found in the ªMainte-
nance Schedulesº in this manual.
WARNING!
Riding the brakes can lead to brake failure and
possibly an accident. Driving with your foot resting
or riding on the brake pedal can result in abnormally
high brake temperatures, excessive lining wear, and
possible brake damage. You wouldn't have your full
braking capacity in an emergency.
Brake And Power Steering Hoses
When the vehicle is serviced for scheduled maintenance,
inspect surface of hoses and nylon tubing for evidence of
heat and mechanical damage. Hard and brittle rubber,
cracking, tears, cuts, abrasion, and excessive swelling
indicate deterioration of the rubber. Particular attention
should be made to examining those hose surfaces nearest
to high heat sources, such as the exhaust manifold.Insure nylon tubing in these areas has not melted or
collapsed.
Inspect all hose connections such as clamps and cou-
plings to make sure they are secure and no leaks are
present.
NOTE:
²
Often, fluid such as oil, power steering fluid, and
brake fluid are used during assembly plant operations
to facilitate the assembly of hoses to couplings. There-
fore, oil wetness at the hose-coupling area is not
necessarily an indication of leakage. Actual dripping
of hot fluid when systems are under pressure (during
vehicle operation), should be noted before a hose is
replaced based on leakage.
²Inspect the brake hoses whenever the brake system is
serviced and at every engine oil change. Inspect hy-
draulic brake hoses for surface cracking, scuffing, or
worn spots. If there is any evidence of cracking,
scuffing, or worn spots, the hose should be replaced
immediately! Eventual deterioration of the hose can
take place resulting in a possibility of a burst failure.
284 MAINTAINING YOUR VEHICLE
Page 304 of 350

License Light
1. Remove the screws securing the light to the rear fascia.
2. Remove the bulb and socket assembly.
3. Pull the bulb out of the socket assembly.
4. Push the replacement bulb into the socket assembly.
5. Reinstall the bulb and socket assembly.6. Reattach the light to the rear fascia, and then install the
screws.
FLUIDS AND CAPACITIES
U.S. Metric
Fuel (approximate)
6.1 Liter Engine 19 gal-
lons72 liters
Engine Oil with Filter
6.1 Liter Engine (SAE 0W-40) 7 qts. 6.6 liters
Cooling System *
6.1 Liter Engine (Mopart
Antifreeze/Coolant 5 Year/
100,000 Mile Formula) or
equivalent.15.2 qts 14.4 li-
ters
* Includes heater and coolant recovery bottle filled to
MAX level.
1 Ð License Light Bulb
2 Ð Socket 304 MAINTAINING YOUR VEHICLE
Page 336 of 350

ABS (Anti-Lock Brake System)............. 204
Adding Engine Coolant (Antifreeze)......... 280
Adding Fuel.......................... 240
Adding Washer Fluid..................97,277
Adjustable Pedals....................... 99
Air Cleaner, Engine (Engine Air Cleaner Filter) . 271
Air Conditioner Maintenance.............. 274
Air Conditioning....................175,176
Air Conditioning Controls................ 175
Air Conditioning Filter................183,275
Air Conditioning, Operating Tips........... 184
Air Conditioning Refrigerant...........274,275
Air Conditioning System........175,176,177,274
Air Pressure, Tires...................129,222
Airbag................................ 37
Airbag Deployment....................41,43
Airbag Light....................42,45,57,126
Airbag Maintenance...................... 44
Airbag, Side........................... 42
Airbag, Window (Side Curtain)...........37,42
Alarm (Security Alarm).................. 129
Alarm System (Security Alarm)............. 15
Alignment and Balance.................. 227Alterations/Modifications, Vehicle............ 7
Antenna, Satellite Radio.................. 170
Antifreeze (Engine Coolant).........279,280,304
Disposal............................ 281
Anti-Lock Brake System (ABS)..........204,208
Anti-Lock Warning Light..............130,206
Anti-Theft Security Alarm (Theft Alarm)...... 15
Anti-Theft System...................... 129
Appearance Care....................... 287
Auto Down Power Windows............... 25
Auto Up Power Windows................. 25
Automatic Dimming Mirror................ 62
Automatic Door Locks.................... 22
Automatic Headlights.................... 90
Automatic Temperature Control (ATC)....... 177
Automatic Transaxle
Special Additives..................... 287
Automatic Transmission...............196,286
Adding Fluid.....................286,306
Autostick........................... 200
Fluid and Filter Changes................ 286
Fluid Change........................ 286
Fluid Level Check..................... 286
336 INDEX
Page 346 of 350

Restraint, Head......................... 86
Restraints, Child........................ 46
Restraints, Occupant..................... 29
Rocking Vehicle When Stuck.............. 257
Rotation, Tires......................... 229
Safety Checks Inside Vehicle............... 56
Safety Checks Outside Vehicle.............. 57
Safety Defects, Reporting................. 331
Safety Information, Tire.................. 213
Safety Tips............................. 55
Satellite Radio......................163,167
Satellite Radio Antenna.................. 170
Schedule, Maintenance................... 308
Seat Belt Maintenance................... 290
Seat Belt Reminder...................... 34
Seat Belts.............................. 29
Adjustable Upper Shoulder Anchorage...... 33
And Pregnant Women.................. 36
Child Restraint.................46,47,48,52
Extender............................ 36
Front Seat.........................29,30
Operating Instructions.................. 30Pretensioners......................... 34
Rear Seat............................ 29
Reminder........................... 127
Untwisting Procedure................... 34
Seats................................. 84
Heated.............................. 86
Lumbar Support....................... 86
Power.............................. 84
Rear Folding......................... 88
Reclining............................ 85
Security Alarm (Theft Alarm)............15,129
Selection of Coolant (Antifreeze).........279,305
Sentry Key (Immobilizer).................. 12
Service Assistance...................... 328
Service Contract........................ 330
Service Engine Soon Light (Malfunction
Indicator)............................. 131
Service Manuals........................ 331
Setting the Clock.................146,152,163
Settings, Personal....................... 140
Shifting.............................. 193
Automatic Transmission.............193,196
Shoulder Belt Upper Anchorage............. 33
346 INDEX
Page 347 of 350

Shoulder Belts.......................... 29
Side Airbag............................ 42
Signals, Turn........................93,126
Slippery Surfaces, Driving On............. 202
Snow Chains (Tire Chains)................ 227
Snow Tires............................ 228
Spark Plugs........................... 270
Speed Control (Cruise Control)............. 100
Speedometer.......................... 124
Starting.............................. 190
Automatic Transmission................ 190
Engine Fails to Start................... 191
Starting and Operating................... 190
Starting Procedures..................... 190
Steering
Column Controls...................... 93
Linkage............................ 276
Power...........................207,276
Tilt Column.......................... 98
Wheel, Tilt........................... 98
Steering Wheel Mounted Sound System
Controls.............................. 171
Storage............................ 115,297Storage, Vehicle.....................182,297
Storing Your Vehicle..................... 297
Sun Roof............................. 109
Sunglasses Storage...................... 104
Supplemental Restraint System - Airbag....... 37
System, Navigation..................... 162
Tachometer........................... 124
Telescoping Steering Column............... 98
Temperature Control, Automatic (ATC)....... 177
Temperature Gauge, Engine Coolant......125,249
Tether Anchor, Child Restraint.............. 49
Theft Alarm (Security Alarm)............... 15
Theft System (Security Alarm).............. 15
Tilt Steering Column..................... 98
Tire and Loading Information Placard.....217,218
Tire Identification Number (TIN)........... 216
Tire Markings......................... 213
Tire Safety Information................... 213
TIREFIT.............................. 249
Tires ...........................57,221,332
Aging (Life of Tires)................... 225
Air Pressure......................... 221
INDEX 347
10