phone DODGE CHARGER SRT 2015 7.G Uconnect 5
[x] Cancel search | Manufacturer: DODGE, Model Year: 2015, Model line: CHARGER SRT, Model: DODGE CHARGER SRT 2015 7.GPages: 56, PDF Size: 1.09 MB
Page 31 of 56

Transfer Ongoing Call Between Handset And
Vehicle
1. During a call, push the VOICE COMMAND button on
the steering wheel.
2. After the BEEP, say “transfer call.”
Changing The Volume
1. Start a dialogue by pushing the PHONE button on the
faceplate, then adjust the volume during a normal call.
2. Use the radio ON/VOLUME rotary knob to adjust the
volume to a comfortable level while the Uconnect®
system is speaking. Please note the volume setting for
Uconnect® phone is different than the audio system
volume setting.
30 Uconnect® PHONE
Page 32 of 56

Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS
CONTENTS
!Uconnect® VOICE RECOGNITION. . . . . . . . . . .32
▫Introducing Uconnect®. . . . . . . . . . . . . . . . . .32
▫Get Started. . . . . . . . . . . . . . . . . . . . . . . . . . .33
▫Basic Voice Commands. . . . . . . . . . . . . . . . . .34
▫Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
▫Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
▫Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
▫Voice Text Reply. . . . . . . . . . . . . . . . . . . . . . .38
▫Additional Information. . . . . . . . . . . . . . . . . .395
Page 34 of 56

Get Started
1. VisitUconnectPhone.comto check mobile device and
feature compatibility and to find phone pairing in-
structions.
2. Reduce background noise. Wind and passenger con-
versations are examples of noise that may impact
recognition.
3. Speak clearly at a normal pace and volume while
facing straight ahead. The microphone is positioned
on the rearview mirror and aimed at the driver.
4. Each time you give a Voice Command, you must first
push either the VR or PHONE button, wait untilafter
the beep, then say your Voice Command.
5. You can interrupt the help message or system prompts
by pushing the VR or PHONE button and saying a
Voice Command from current category.
All you need to control your Uconnect® system with
your voice are the buttons on your steering wheel.
1—PushToBeginRadioOrMediaFunctions2 — Push To Initiate, Answer, Or End A Phone Call, Send Or Re-ceive A Text
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 33
Page 35 of 56

Basic Voice Commands
The basic Voice Commands below can be given at any
point while using your Uconnect® system.
Push the VR button. After the beep, say#
•Cancelto stop a current voice session
•Helpto hear a list of suggested Voice Commands
•Repeatto listen to the system prompts again
Notice the visual cues that inform you of your voice
recognition system’s status. Cues appear on the touch-
screen.1 — Push To Initiate Or To Answer A Phone Call, Send Or Re-ceive A Text2—PushToBeginRadioOrMediaFunctions3—PushToEndCall
34 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS
Page 38 of 56

TIP:Press the “Browse” button on the touchscreen to see
all of the music on your iPod® or USB device. Your Voice
Command must matchexactlyhow the artist, album,
song and genre information is displayed.
Phone
Making and answering hands-free phone calls is easy
with Uconnect®. When the Phonebook button is illumi-
nated on your touchscreen, your system is ready. Check
UconnectPhone.comfor mobile phone compatibility
and pairing instructions.
Push the PHONE button. After the beep, say one of
the following commands:
•CallJohn Smith
•Dial123-456-7890 and follow the system prompts
•Redial(call previous outgoing phone number)
•Call back(call previous incoming phone number)
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 37
Page 39 of 56

TIP:When providing a Voice Command, push the
PHONE buttonand say“Call,”then pronounce the
nameexactlyas it appears in your phone book. When
a contact has multiple phone numbers, you can say
“CallJohn Smithwork.”
Voice Text Reply
Uconnect® will announceincomingtext messages. Push the
PHONE buttonand sayListen.(Must have compat-
ible mobile phone paired to Uconnect® system.)
1.Once an incoming text message is read to you, push the
PHONE button. After the beep, say...“Reply”
2. Listen to the Uconnect® prompts. After the beep,
repeat one of the pre-defined messages and follow the
system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic. See you later.
No. Start without
me.
I’ll be late.
38 Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS
Page 40 of 56

PRE-DEFINED VOICE TEXT REPLY RESPONSES
Okay. Where are you? I will be
late.Call me. Are you there
yet?
I’ll call you
later.
I need direc-
tions.
See you in
minutes.I’m on my way. Can’t talk right
now.I’m lost. Thanks.
TIP:Your mobile phone must have the full implementa-
tion of theMessage Access Profile (MAP)to take advan-
tage of this feature. For details about MAP, visit
UconnectPhone.com. Apple iPhone® iOS6 or later sup-
ports reading incoming text messages only.
Additional Information
© 2014 Chrysler Group LLC. All rights reserved. Mopar®
and Uconnect® are registered trademarks and Mopar
Owner Connect is a trademark of Chrysler Group LLC.
Android is a trademark of Google Inc. SiriusXM and all
related marks and logos are trademarks of SiriusXM
Radio Inc. Yelp, Yelp logo, Yelp burst and related marks
are registered trademarks of Yelp®.
DriveUconnect.com
Uconnect® System Support 1-877-855-8400
Mon. – Fri., 7:00 am – 12:00 am, ET
Sat., 8:00 am – 10:00 pm, ET
Sun., 9:00 am – 5:00 pm, ET
Uconnect® Access Services Support 1-855-792-4241.
Please have your Uconnect® Security PIN ready when
you call.
5
Uconnect® 5.0 VOICE RECOGNITION QUICK TIPS 39
Page 42 of 56

SETTINGS MAIN MENU
CONTENTS
!SETTINGS MAIN MENU. . . . . . . . . . . . . . . . . .42
▫Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
▫Voice — If Equipped. . . . . . . . . . . . . . . . . . . .43
▫Clock & Date. . . . . . . . . . . . . . . . . . . . . . . . .43
▫Safety/Assistance — If Equipped. . . . . . . . . . .43
▫Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
▫Auto-On Comfort — If Equipped. . . . . . . . . . .44
▫Doors & Locks — If Equipped. . . . . . . . . . . . .44
▫Heated Seats — If Equipped. . . . . . . . . . . . . . .44
▫Engine Off Options. . . . . . . . . . . . . . . . . . . . .44
▫Compass Settings. . . . . . . . . . . . . . . . . . . . . .45
▫Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
▫Phone/Bluetooth®. . . . . . . . . . . . . . . . . . . . .46
▫SiriusXM Setup. . . . . . . . . . . . . . . . . . . . . . . .46
6
Page 46 of 56

Compass Settings
Compass Variance
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences the variance should be set for the zone where
the vehicle is driven, per the zone map. Once properly
set, the compass will automatically compensate for the
differences, and provide the most accurate compass
heading.
NOTE:Keep magnetic materials away from the top of the
instrument panel, such as iPod’s, Mobile Phones, Laptop
Computers and Radar Detectors. This is where the com-
pass module is located, and it can cause interference with
the compass sensor, and it may give false readings.
Compass will not show if vehicle has GPS activated.
Compass Variance Map6
SETTINGS MAIN MENU 45
Page 47 of 56

Compass Calibration
Press the “Compass Calibration” button on the touch-
screen to change this setting. This compass is self-
calibrating, which eliminates the need to manually reset
the compass. When the vehicle is new, the compass may
appear erratic and it may need to be calibrated. You may
also calibrate the compass by pressing the “Yes” button
on the touchscreen popup and completing one or more
360-degree turns (in an area free from large metal or
metallic objects) until the CAL indicator displayed in the
EVIC turns off. The compass will now function normally.
Audio
Refer to the “Operating Instructions/Radio” section in
this manual for details.
Phone/Bluetooth®
Refer to the “Uconnect® Phone” section in this manual
for details.
SiriusXM Setup
Refer to the “Radio” section in this manual for details.
46 SETTINGS MAIN MENU