DODGE DURANGO 2004 2.G Owners Manual

then the system will turn off. Thus, a maximum of four
hours of operation until the system is reactivated.
If the low heat setting is initially selected, the system will
operate for two hours and then turn off.
If the indicator lamp on the heated seat switch does not
light when the switch is depressed or if heated seats does
not operate, the system should be serviced by a qualified
technician.
Second Row 40/20/40 Seat Ð Fold and Tumble
The 40/20/40 seat configuration is standard on all mod-
els. This seat is equipped with a unique fold-and-tumble
feature. The 40 % seatbacks have spring loaded hinges
which assist with the folding of the seatbacks.
To fold the 40 % seats, operate the latches by a single
lever on the outboard side of each seat. Upon raising the
lever slowly, the seatback releases first, allowing theseatbacks to fold with spring assistance. In this position,
the back is horizontal and aligned to the rear floor.
Second row leather seats have seatback recliners at the
40% seating positions. Raising the lever allows the seat-
back to be reclined an additional 11degrees.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91
3

Raising the lever allows third row seat passengers to fold
the seatbacks and release the latches when exiting the
vehicle. Once the seatback is in a folded position continue
raising the lever fully to release the cushion latches and
tumble the seat. This folding and tumbling action pro-
vides easy access to the third row seat.NOTE:The secondary lever on the rear of each cushion
allows third row-seat passengers to release the latches
and fold the seatbacks when exiting the vehicle.
NOTE:The head restraints must be lowered but do not
have to be removed to fold and tumble the seats.
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Third Row Seat Bench Ð If Equipped
To Fold The Seats
Folding the third seat occurs in two stages: the cushion is
lifted and moved forward then the back is folded. Pull up
and forward on either one of the 2 straps at the front of
the cushion. The cushion rises on the ends of the
U-shaped bracket that pivots on the floor underneath the
cushion. If you continue to pull forward, the cushion
drops back to the floor directly behind the second seat.
Once the cushion has been moved forward, the seatback
is free to fold forward flush with the floor.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93
3

Flat Load Floor
Unsnap the flipper panels on the third row seats and flip
them forward on the back(s) of the second row seat(s).
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Achieve Maximum Cargo Capacity
Pull up the release handles and strap on the second row
seats and fold the seat backs flat. Then fold the third row
seat flat. Unsnap the flipper panel on the third row seat
and flip it forward on the backs of the second row seats.
NOTE:When returning the second row seats to their
upright position, always snap the third row seat flipper
panel(s) back to the third row seat first.
NOTE:The head restraints must be lowered when
folding the back but do not have to be removed.
NOTE:The seat belt buckles are hinged to fold with the
back.WARNING!
Make sure the cushion is properly engaged under
the seatback to properly lock the seatback in the
riding position.
Do not sit in the 3rd row seat with the second row
seatbacks folded or with the second row seats folded
and tumbled. In a collision, you could slide under
the seat belt and be seriously or even fatally injured.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
3

Third Seat 50/50 Split Seat Ð If Equipped
To Fold Down The Seat(s)
Folding the third row 50/50 seats requires one step. Pull
up the release handle and move the seatback forward.
This can be done from either in front of or behind the
third row seat. The seatback and seat cushion movesimultaneously into a flat load floor position. The cush-
ion and back will move forward together resting on the
floor behind the second row seats. The seat belt buckles
are hinged to fold with the seatback.
To extend the load floor, unsnap the straps and flip the
flipper panel(s) on the third row seat forward on the
back(s) of the second row seat(s).
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

To Return The Seat(s) To An Upright Position
Snap the flipper panel(s) on the seat back. Then pull on
the pull strap on the seat back to reposition the seat(s) to
an upright position.
NOTE:Make sure the seatback is properly engaged to
lock the seatback to a upright position. This can be
verified by pulling/pushing forward on the seatback.
The seatback will not move forward.
DRIVER MEMORY SYSTEM Ð IF EQUIPPED
Once programmed, the memory buttons 1 and 2 on the
driver's door panel can be used to recall the driver's seat
position, driver's outside mirror position, adjustable
brake and accelerator pedals position, Automatic Tem-
perature Control (ATC) temperature and radio station
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97
3

preset settings. Your Remote Keyless Entry transmitters
can also be programmed to recall the same positions
when the UNLOCK button is pressed.
Your vehicle was delivered with two Remote Keyless
Entry transmitters. One or both transmitters can be
linked to either memory position. The memory systemcan accommodate up to two transmitters, each transmit-
ter linked to either of the two memory positions.
Setting Memory Positions and Linking Remote
Keyless Entry Transmitter to Memory
NOTE:Each time the SET (S) button and a numbered
button (1 or 2) are pressed, you erase the memory settings
for that button and store new settings.
1. Adjust the driver's seat, recliner, and both side view
mirrors to the desired positions.
NOTE:Not all motors may be moved at one time.
Please refer to the 8-way power seat description.
2. Adjust the brake and accelerator pedals to the desired
positions.
3. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

4. Adjust the Automatic Temperature Control (ATC)
while the ATC is in Auto mode.
5. Press and release the SET (S) button located on the
driver's door.
6. Within 5 seconds, press and release memory button 1
or 2 on the driver's door. The next step must be per-
formed within 10 seconds if you desire to also use a
Remote Keyless Entry transmitter to recall memory po-
sitions.
7. Press and release the LOCK button on one of the
transmitters.
8. Insert the ignition key and turn the ignition switch to
the ON position.
9. Repeat the above steps to set the next memory posi-
tion using the other numbered memory button or to link
another Remote Keyless Entry transmitter to memory.Memory Position Recall
NOTE:
²The driver's seat belt must be unbuckled to recall
memory positions.
²The vehicle must be in Park to recall memory posi-
tions.
²Not all motors may be moved at one time. Please refer
to the 8-way power seat description.
To recall the memory settings for driver one, press
memory button number 1 on the driver's door or the
Unlock button on the Remote Keyless Entry transmitter
linked to memory position 1.
To recall the memory setting for driver two, press
memory button number 2 on the driver's door or the
Unlock button on the Remote Keyless Entry transmitter
linked to memory position 2.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99
3

A recall can be cancelled by pressing any of the memory
buttons on the drivers door during a recall (S, 1, or 2), or
pressing any one of the power seat buttons, or pressing
the adjustable pedals button, or pressing either the LOCK
or UNLOCK button on the remote keyless entry trans-
mitter when not in the ignition switch. When a recall is
cancelled, the driver's seat, and the pedals stop moving.
A delay of one second will occur before another recall can
be selected.
To Disable A Transmitter Linked to Memory
1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release the memory SET (S) button located
on the driver's door.
3. Within 10 seconds, press and release the UNLOCK
button on the Remote Keyless Entry transmitter.To disable another transmitter linked to either memory
position, repeat steps 1-3 for each transmitter.
NOTE:The capability to link Remote Keyless Entry
transmitters to memory is enabled when delivered from
the factory. The capability to link Remote Keyless Entry
transmitters to memory can be disabled (or later reen-
abled) by a qualified DaimlerChrysler representative.
Self-Limiting Control
To improve vehicle reliability, the memory system in-
cludes a self-limiting control for full travel positioning of
power seat and Adjustable Pedal movement (all direc-
tions). This self-limiting control may however develop an
unintended movement limitation if an obstruction is
encountered at sometime during usage. One example of
such an occurrence may include a box or package ob-
structing the full rearward movement of the driver's seat.
Once the obstruction is removed, the self-limiting control
may be restored to maximum position. The self-limiting
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE