DODGE DURANGO 2021 Vehicle Warranty
Manufacturer: DODGE, Model Year: 2021, Model line: DURANGO, Model: DODGE DURANGO 2021Pages: 262, PDF Size: 10.42 MB
Page 51 of 262

BRIDGESTONE® - FIRESTONE®   
50
5. Replace valve cap.
TIRE ROTATION
For  maximum  mileage,  rotate  your  tires  according  to  the  vehicle  
m a
nufacturer’s  recommendations  (consult  your  vehicle  Owner’s  
Manual), or if not provided, rotate every 5,000  miles using a rotation 
pa
ttern such as below (see “Radial Tire Rotation” in this manual). 
Page 52 of 262

BRIDGESTONE® - FIRESTONE®   
51
TIRE WEAR—VISUAL CHECK
Check for obvious signs of wear.
Place  a  penny  in  the  tire  tread  grooves  as  
shown.  If  you  can  see  the  top  of  Lincoln’s
 
h
 ead,  the  tire is  worn  out  and  needs  to  be  
replaced.
TIRE MAINTENANCE AND SAFETY 
IN
 FORMATION
Any  tire,  no  matter how well  constructed,  
ma
 y  fail  in  use  as  a  result  of  punctures,  
impact  damage,  improper  inflation,  
overloading,  or  other  conditions  resulting  
from use or misuse. Tire failure may create a risk of property damage,  
serious personal injury or death.
To  reduce  the  risk  of  tire  failure,  Bridgestone®  Firestone®  North  
A m
erican  Tire,  LLC  strongly  recommends  you  read  and  follow  all  
safety  information  contained  in  this  manual.  In  addition,  we  
recommend periodic inspection and maintenance, if necessary, by a  
qualified tire service professional.
WARNING! 
Serious  personal  injury  or  death  may  result  from  a  tire  failure.  
Ma
 ny  tire  failures  are  preceded  by  vibration,  bumps,  bulges  or  
irregular wear. If a vibration occurs while driving your vehicle or  
you  notice  a  bump,  bulge  or  irregular  wear,  have  your  tires  and  
vehicle evaluated by a qualified tire service professional. 
Page 53 of 262

BRIDGESTONE® - FIRESTONE®   
52
TIRE FAILURE WHILE DRIVING
TIRE INFLATION PRESSURE
Tires  need  proper  inflation  pressure  to  operate  effectively  and  
p e
rform  as  intended.  Tires  carry  the  vehicle,  passenger,  and  cargo  
loads  and  transmit the braking, acceleration, and turning forces. The  
vehicle manufacturer recommends the inflation pressures for the tires  
mounted on your vehicle.
WARNING! 
It  is  not  often  that  a  properly  maintained  tire  will  “blow  out”  
wh
 ile  you  are  driving.  More  commonly,  if  inflation  pressure  is  
lost, it will be gradual.  If you do experience a blowout  or sudden  
tire failure, the following information should be helpful:
• When the failure occurs, you may hear a loud noise, feel a vibra -
t
 ion,  and/or  the  vehicle  may  pull  toward  the  side  of  the  failed  
ti
 re.
• DO NOT abruptly brake or turn.
•
 Slowly remove your foot from the accelerator, hold the steering  
w
 heel firmly, and steer to maintain your lane position.
• Once the vehicle has slowed, apply the brakes gently.
•
 Gradually pull over to the shoulder and come to a stop, as far off  
t
 he road as possible.
WARNING! 
Driving on tires with improper inflation pressure is dangerous.
• Under-inflation causes excessive tire heat build-up and internal  
s
 tructural damage.
• Over-inflation makes it more likely for tires to be cut, punctured,  
o
 r broken by sudden impact. 
Page 54 of 262

BRIDGESTONE® - FIRESTONE®   
53
These  situations  can  cause  a  tire  failure,  even  at  a  later  date,  which  
could lead to serious personal injury or death. Consult the vehicle tire  
information  placard  and/or  Owner’s  Manual  for  the  recommended  
inflation  pressures.  In  addition  to  tire  damage,  improper  inflation  
pressure may also:
• Adversely affect vehicle ride and handling.
•
Reduce tire tread wear.
•
 Affect fuel economy.
T
 herefore,  follow  these  important  recommendations  for  tire  and  
ve
 hicle safety, mileage, and economy:
• Always keep the vehicle manufacturer’s recommended inflation  p
 ressure in all your tires, including the spare.
• Check their pressure monthly and before long trips or carrying  e
 xtra weight.
Your vehicle’s  tire information placard and/or Owner’s Manual will  
te
 ll  you  the  recommended  cold  inflation  pressure  for  all  your  tires,  
including the spare. Examples of placards are shown in Figures 1 and  
2. Your placard may look different and have different tire and loading  
information than that shown in either of the figures.  You must check 
the  driver  side  door  edge  or  door  jamb  area  for  the  actual  placard  
that  applies  to  your  vehicle.   For  questions  about  locating  or  
understanding  the  tire  information  placard,  consult  your  vehicle  
Owner’s Manual or ask a qualified tire service professional.
Figure 1: EXAMPLE—Tire And Loading Information Placard 
Page 55 of 262

BRIDGESTONE® - FIRESTONE®   
54
Figure 2: EXAMPLE—Tire Information Placard
Maximum  Pressure  Indicated  on  the  Tire  Sidewall:   This  is  the 
maximum permissible inflation pressure for the tire only. The vehicle  
manufacturer’s recommended tire pressures may be lower than, or the  
same  as,  the  maximum  pressure  indicated  on  the  tire  sidewall.  The  
vehicle manufacturer’s specification of tire pressure is limited to your  
particular vehicle and takes into account your vehicle’s load, ride, and  
handling  characteristics,  among  other  criteria.  Since  there  may  be  
several  possible  vehicle  applications  for  a  given  tire  size,  a  vehicle  
manufacturer  may  choose  a  different  inflation  pressure  specification  
for that same size tire on a different vehicle. Therefore, always refer to  
the  inflation  pressure  specifications  on  the  vehicle  tire  information  
placard and/or in your vehicle Owner’s Manual.
Different  Tire  Pressures  for  the  Front  and  Rear  Tires:  F
 or  some 
vehicles, the recommended front and rear inflation pressures may be  
different  (such as in the example  shown  in  Figure  2).  Make sure  you  
take  this  into  account  during  inflation  pressure  checks  and  when  
rotating tires.
Pressure  Loss:   T
 ires  can  lose  1  psi  (7  kPa)  per  month  under  normal  
conditions  and  can  lose  1  psi  (7  kPa)  for  every  10°  F  (5.6°  C)  
temperature drop. A puncture, leaking valve, or other damage could  
also cause inflation pressure loss. If a tire loses more than 2 psi (14 kPa)  
per month, have it checked by a qualified tire service professional. 
Page 56 of 262

BRIDGESTONE® - FIRESTONE®   
55
TIPS FOR SAFE TIRE INFLATION
• Check  your  tire  pressures,  including  your  spare  tire,  monthly  and  
b
 efore long trips or carrying extra weight. Be sure to use an accurate  
pressure gauge.
• Check inflation pressure when the tires are “cold.” Tires are consid -
e
 red  “cold”  when  the  vehicle  has  been  parked  for  three  hours  or  
mo
 re, or if the vehicle has been driven less than a mile at moderate  
speed.
• Never release pressure from a hot  tire in order to reach the recom -
m
 ended cold tire pressure. Normal driving causes tires to run hotter  
an
 d  inflation  pressure  to  increase.  If  you  reduce  inflation  pressure  
when  your  tires  are  hot,  you  may  dangerously  underinflate  your  
tires.
• If  it  is  necessary  to  adjust  inflation  pressure  when  your  tires  are  
“
 hot”,  set  their  pressure  to  4  psi  (28  kPa)  above  the  recommended  
cold inflation pressure. Recheck the inflation pressure when the tires  
are cold.
• If  your  tires  lose  more  than  2  psi  (14  kPa)  per  month,  the  tire,  the  
v
 alve,  or  wheel  may  be  damaged.  Consult  a  qualified  tire  service  
professional for an inspection.
• Use valve caps to keep the valves clear of debris and to help guard  
a
 gainst inflation pressure loss.
WARNING! 
Inflating  an  unsecured  tire  is  dangerous.  If  it  bursts,  it  could  be  
hu
 rled  into  the  air  with  explosive  force  resulting  in  serious  
personal injury or death. Never inflate a tire unless it is secured to  
the vehicle or a tire mounting machine. 
Page 57 of 262

BRIDGESTONE® - FIRESTONE®   
56
TIPS FOR SAFE LOADING
• Always  keep  the  vehicle  manufacturer’s  recommended  inflation  
p
 ressure in all your tires, including the spare. Check their pressure  
monthly and before long trips or carrying extra weight.
• Never exceed the maximum load rating stamped on the sidewall of  
y
 our tire.
• Never  exceed  the  Gross  Vehicle  Weight  Rating  (GVWR)  or  front/ r
 ear Gross Axle Weight Rating (GAWR) of your vehicle.
• Consult  your  vehicle  Owner’s  Manual  for  load  recommendations  
a
 nd special instructions  such  as for  trailer/towing  and  snow  plow  
installations.
TIRE DAMAGE, INSPECTION AND SERVICE LIFE
Evaluation  and  maintenance  of  your  tires  is  important  to  their  
pe
 rformance  and  the  service  they  provide  to  you.  Over  time  and/or  
through  use,  the  condition  of  a  tire  can  change  from  exposure  to  
everyday road conditions, the environment, damaging events such as  
punctures, and other external factors.
WARNING! 
Driving  your  vehicle  in  an  overloaded  condition  is  dangerous.  
Ov
 erloading  causes  excessive  tire  heat  build-up  and  internal  
structural  damage.  This  can  cause  a  tire  failure,  even  at  a  later  
date,  which  could  lead  to  serious  personal  injury  or  death.  
Consult  the  vehicle  tire  information  placard,  certification  label,  
and owner’s manual for the recommended vehicle load limits and  
loading recommendations.
WARNING! 
Driving  on  damaged  tires  is  dangerous.  A  damaged  tire  can  
su
 ddenly fail causing serious personal injury or death. Have your  
tires regularly inspected by a qualified tire service professional. 
Page 58 of 262

BRIDGESTONE® - FIRESTONE®   
57
You  should visually inspect  your tires  on  a regular basis throughout  
their life, and you should have your tires periodically evaluated by a  
qualified tire service professional when your vehicle is serviced such  
as  routine  maintenance  intervals,  oil  changes,  and  tire  rotations.  In  
particular, note the following tips for spotting tire damage:
• After striking anything unusual in the roadway, have a qualified tire  
s
 ervice  professional  demount the  tire and  inspect it  for damage. A  
tire may not have visible signs of damage on the tire surface. Yet, the  
tire  may  suddenly  fail  without  warning,  a  day,  a  week,  or  even  
months later.
• Inspect your tires for cuts, cracks, splits or bruises in the tread and  
s
 idewall  areas.  Bumps  or  bulges  may  indicate  a  separation  within  
the  tire  body.  Have  your  tire  inspected  by  a  qualified  tire  service  
professional. It may be necessary to have it removed from the wheel  
for a complete inspection.
• Inspect your tires for adequate tread depth. When the tire is worn to  
t
 he  built-in  indicators  at  2/32  inch  (1.6 mm)  or  less  tread  groove  
de
pth,  or  the  tire  cord  or  fabric  is  exposed,  the  tire  is  dangerously  
worn and must be replaced immediately.
• Inspect your tires for uneven wear. Wear on one side of the tread or  
f
 lat spots in the tread may indicate a problem with the tire or vehicle.  
Consult a qualified tire service professional.
• Inspect  your  wheels  also.  If  you  have  a  bent  or  cracked  wheel,  it  
m
 ust be replaced.
• Don’t forget to check the spare tire.
M
ake sure your tires, including the spare tire, continue to be regularly  
in
 spected after 5 years of service to determine if they can continue in  
service. Even when your tires appear to be usable from their external  
appearance  or  the  tread  depth  may  have  not  reached  the  minimum  
wear out depth, it is recommended that all tires (including spare tires  
and “temporary use” spares) more than 10 years old be replaced with  
new tires.
The  10  year period after the date of production is not an indicator of  
ac
 tual  service  life  for  any  individual  tire.  Some  tires  will  need  to  be  
replaced before 10 years due to conditions such as punctures, impact  
damage,  improper  inflation,  overloading,  tread  wear  or  other  
conditions involving use or misuse of the tire. If a tire is worn out or  
otherwise unserviceable from damage or  conditions of  use, it  should  
be replaced regardless of when it was produced or placed in service. 
Page 59 of 262

BRIDGESTONE® - FIRESTONE®   
58
The  vehicle  manufacturer  may  consider  vehicle  performance  
characteristics  when  making  tire  replacement  recommendations.  
Consult your vehicle Owner’s Manual for any information regarding  
tire  service  life  and  replacement  and  follow  the  recommendations  
applicable to your vehicle.
TIRE MANUFACTURE DATE
The  tire  manufacture  date  is  determined  by  examining  the  DOT  tire  
id
 entification number, also known as the DOT serial number or code,  
which can be found on at least one sidewall near the wheel. It may be  
necessary to look on both sides of the tire to find the entire serial code.  
For  more  information  on  DOT  serial  codes,  see  “Tire  Sidewall  
Labeling” in this manual.
Tires  Produced  Since  2000:   T
 he last  four  (4)  digits  of  the  serial  code  
identify  the  week and  year  of  production.  In  the  example  below,  the  
tire  was  produced  in  the  18th  week  of  2000.  Another  example,  a  tire  
with a serial code ending in “2406” would have been produced in the  
24th week of 2006.
Tires Produced Prior to 2000:  T
 he last three (3) digits of the serial code  
identify  the  week  and  year  of  production.  For example,  a  tire with  a  
code  ending  in  “329”  would  likely  have  been  produced  in  the  32nd  
week  of  1999,  but  possibly  produced  in  1989.  If  in  doubt,  consult  a  
qualified tire service professional. 
Page 60 of 262

BRIDGESTONE® - FIRESTONE®   
59
TIRE REPAIRS
A  complete  inspection  and  repair  of  your  tire  in  accordance  with  
Ru
 bber  Manufacturers  Association  (RMA)  procedures  should  be  
conducted  by  a  qualified  tire  service  professional.  While  the  
comprehensive  procedures  and  recommendations  for  tire  repair  are  
beyond  the  scope  of  this  manual,  a  proper  tire  repair  includes  the  
following:
• The tire is demounted from the wheel for a complete inspection,  
i
 nside and out.  Some damage to the tire may only be evident on the  
interior of the tire.
• The puncture injury is 1/4  
 inch (6 mm) or less and must be within  
th
e tread area as shown in the graphic.  This helps ensure long-term 
tire and repair durability.
• A patch is applied to the interior of the tire and the puncture hole  
i
 s filled with a suitable plug/stem filler.  This helps ensure that the 
interior of the tire is adequately sealed to prevent inflation pressure  
loss  and  prevents  contamination  of  the  steel  belts  and  other  plies  
from the elements (such as water) in the outside world.
WARNING! 
Driving on an improperly repaired tire is dangerous. An improper  
re
 pair can be unreliable or permit further damage to  the tire. The  
tire may suddenly fail, causing serious personal injury or death.