engine oil DODGE MONACO 1965 1.G Owners Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 1965, Model line: MONACO, Model: DODGE MONACO 1965 1.GPages: 46, PDF Size: 8.12 MB
Page 5 of 46
YOU'LL WANT
TO KNOW
TillS manual Includes oper~tln\~ In
struetlons lor all equipment .'.hether
st'lldMd, optional, or specl;]1 avail
able at tile time tillS r1i.1 11 U.1 I ,'.~S
approved for prlllting. Cilryslrl Cor
poratloll reserves ti'e r',111 10 rmke
(Ilanges 111 deSign and speuflcallolls,
.1nd or, to make additions to or
Illlprovcmcllts III Its produCI ,'.Ii iloul
ImposlIl,
.111\' OIJII,~IIOIlS UpOIl Itself
10 Illslall tile'" all lis produrts
previously nlililuidclured
page Warranty. . . . . . .. . ........ , . 2 Explanation of Warranty. . . . . . .. 3 Service Schedule .... ' ..... , 4 Owner's Required Services Record. . . 6 Let's Get AcqUainted keys. .. ............ ,. 7 manual seat adjustment. . . . .. 7 rear-view mirror. . . .. .. .. . . .. 7 Driver-Centered Instrumentation 8 I nstrument Cluster Details. , 9 Starting the Engine neutral. . .. .,.............. 10 ignition lock. . . . • . . .. 10 parking brake. . . .. ....•.... 10 break-in information ......... 11 Transmission automatic transmission operation and ranges ....... 12 manual transmission operation. 13 Ughts-I nside and Out head light switch ............. 14 interior lights ........ , . , ..... 14 head light beam selector. . . . 14 back-up lights. . . . . . . . . . . . . .. 14 turn signal .. , . . . . . . . . . . . . . .. 14 glove compartment light. . . . .. 14
page trunk light.. .. . .. , .... ,... 14 Opening and Closing Controls hood lock .... " ......... , 15 outside door locks . ,. ., ... 15 inside door locks, .. .,...... 15 luggage compartment lock. . .. 15 power door locks. , .. . . . . . . . .. 15 window control . .. . _ . . .. 16 vent window control.. . . . . . . .. 16 power window. , ... ' . . . . . . 16
Safety, Comfort and Convenience Features power seat adjustment 17 windshield wipers and washer. 17 glove compartment. . . . . . . . . . . 17 adjustable steering whee\. .... 19 sun visors... . . . . .. .. ....... 17 clock .................... 18 seat belts. ...... ... 18 rear view mi rrors .. .. . .. , 19 custom seat adjustment. . , .... 19 parking brake warning signal., 19 emergency warning Hasher. . . 19 ash receiver ................ 19 coat hooks .. .. . .. .. .. .. ... 20 Auto Pilot. ............. , 20
page refueling . . 20 Cool Aire air conditioning 20 radios .. , .... ,.... .. 21 rear seat speaker ............ 21 reverberator . 21 remote-control outside mirror .. 21 Heater Operation . . 22 Air Conditioner Operation . 23 Station Wagon Features seat storage.. .... .... . 26 tailgate and rear window .. .. 27 jack and spare tire storage .... 28 Convertible Top-Operation and Maintenance ... , . . , ., 29 How to Increase Tire Life .... . 30 The Safe Way to Change a WheeL ........... ,.... . .. 31 Appearance Care ... ' . 32 Service Tips, . . . . . . 35 Specifications, Capacities & Data license data , .. , ............ 41 fluid capacities. 41 light bulbs. . . . . . . . 41 lightfuses. . . . . .. .. . 41 engine specifications. 41
Page 7 of 46
EXPLANATION OF WARRANTY AND SERVICE RESPONSIBILITIES
1. PRE-DElIVERY SERVICE: For your maximum satisfac
tion, your new cor has been inspected and prepared for delivery by your authorized selling dealer in accordance with the monufodurer's recommendations.
2. WARRANTY SERVICE: Your authorized selling dealer will perform any service which may become necessary under the Manufacturers Passenger Cor Warranty, and you should go to your selling dealer for such service if possible. If you cannot return to your selling dealer, however, any Chrysler Motors Corporation Authorized Dealer will honor the Manufacturer's Passenger Car Warranty.
3. TIRE WARRANTY: Your tires are warranted separately by the tire manufacturer. This provides, you protection against defects in workmanship and material under their
lifetime warranty, and against the hazards covered by their road hazard warranty. You may use this booklet to establish the delivery dote of your car to the tire manu · faclurer's represenlative should you require rood hazord type warranty service. Ad justments under either warranty will be based on .tread wear remaining ,and list price at lime of tire failure .
4. AIQPAR BATTERY SERVICE ADJUSTMENT POLICY: If the ballery on your vehicle should fail within 1 2 months
or 12,000 miles, whichever occurs flnt after delivery, it will be replaced at no cost . Thereafter, il will be replaced on a pro-rola adlustmenl basis up 10 36 monlhs from date of original vehicle purchase. The pro·rata adjustment provides you wilh a credit toward. the purcha.e of a new Mo Par Ballery, based on the number of months remaining in the pro· rata period at Ihe lime the battery is found defeelive. Thi. warranty does nol apply if the ballery has been damaged, abused, neglected or transferred to another vehicle.
5. REQUIRED MAINTENANCE SERVICES: The engine oil and oil Alter must be changed and the carburetor air folter cleaned and replaced as specifled in the warranty to assure protect ion under the 5 year/50,000 mile engine and drive t rain warranty coverage. At least every six months, a Chry.ler Motors Corporation Authorized Dealer must certify
on the form supplied wilh Ihe vehicle Ihal (11 you have furnished the dealer evidence thaI Ihe required mainlenance services have been performed, and (21 Ihe mileage then registered on the vehicle odometer. Any competenl service garage may perform Ihi. service; but we highly retommend you permit your Authorized Selling Dealer to perform these maintenance services as part of the CertiAed Cor Core systematic maintenance program.
6. OWNER'S RESPONS/B/lITY, Maintenance services such as the following are not covered by the warranly and are Ihe responsibility of the owner:
Moint.nonc. and Adjustmenls:
Periodic lubrication and adjustments that become necessary because of use and operation of the vehicle.
Engine oil-changing or adding Engine tune-up and electrical system checks front suspension alignment and wheel balance Tire rotation Drive belt adjustments
Replacement IIems:
Oil, air and fuel Alters . spark plugs, condenser . ignition points , crankcase yentilat ion valve
7. NOTICE OF TRANSFER OF OWNERSHIP: Within 30 days after acquir ing the cor, subsequent owners should have a Chrysler Motors Corporation Authorized Dealer submit a Notice of Transfer of Ownership to Chrysler Motors Corporation certify ing the mileage and service history of the vehicle. If previou. Owners have had the Required Service. performed and the Service Record and odometer mileages properly certifled at 6 month intervals, any remaining cover · age of the Manufacturer's Passenger Cor Warranty will continue to apply. 3
Page 8 of 46
z
o
-t-U 1&1 t-
O D: IL
4
HUW YOU CAN ENJOY· PROTECTION AND DRIVING SATISFACTIO
*
REQUIRED MAINTENANCE SERVICES
The following maintenance services ore required to assure full consideration under
the 5 year/50,OOO mile coverage of the Manufacturer's Passenger Car Warranty.
FIRST Oil CHANGE: The engine oil need not be removed until the flrst scheduled oil change .
WHEN TO ADD OIL: It's not unusual for a new engine to use a certain amount of engine oil during the break-in period. Check oil level during each stop for gasoline. Add oil only when level on dip stick is at or below the "ADD OIL" mark.
SELECTION OF O IL : Use only oils "For Service MS" and of the proper SAE grade for the overage temperature in your area. See Engine Oil Recommendations. poge 38.
SERVICE INTERVALS
Page 10 of 46
REQUIRED MAINTENANCE SERVICES-OWNER'S RECORD *
The following maintenance services are required to assure full cansideration under
the 5 year/50,OOO mile coverage of the Manufacturer's Passenger Car Warranty.
1. CHANGE ENGINE OIL at least every 3 months or 4,000 miles,
whichever comes first.
MILEAGE
DATE MILEAGE ----------------------L/o '(S
.32... I)?
2. CHANGE ENGINE OIL FILTER
every secand oil change.
MILEAGE
3. CLEAN CARBURETOR AIR FIL TER every 6 months and re
place every 2 years. DATE
CLEANED _____ -.:...._
REPLACED ____________ _
CLEANED ____________ _
ClEANED
____________ _
ClEANED
____________ _
REPLACED ____________ _
CLEANED
______ _
CLEANED ______ _
* This record i~ for owner's use only. It is NOT VALID AS CERTIFICATION. A Chrysler Motors Corpo ration Autharized Dealer
6
must certify form supplied with the vehicle .
Page 14 of 46
INSTRUMENT CLUSTER DETAILS
Your instruments provide Inlormation about whars happening under the hood. That's why It 's a good idea lor you to check them frequently as you drive. Eye-ease paint is applied to the instrument cluster area to eliminate glare.
1. SPEEDOMETER-Located directly 10 front of you for easy visibility. At night the speedometer is softly lighted and glareless.
2. GASOLINE GAUGE-With ignition key in ON posillon the pointer will indicate the amount of fuel \0 gasoline tank.
3. ODOMETER-This group of numbers tells you tolal mileage the car has been driven in miles and tenths of miles.
4. TEMPERATURE GAUGE-Indicates engine coolant temperature. Pointer will normally slay near center while driving. If the pointer rises suddenly or remains on " H " while driving, stop car, turn oft engine and do not operate car until cause is located and corrected.
S. OIL PRESSURE LlGHT-A red glow informs you immediately if engine oil
pressure drops below normal. This light is
positive and unvarying, and catches your attention at once. Red light should not be on except momentarily when engine is first started or is operating at idle. If light stays on while driving, do not operate car until cause of low oil pressure is located and corrected. Light indicates lack of oil pressure, not the amount of oil in the crankcase.
6. ALTERNATOR INDICATOR-Indicates whether battery is being charged (" e ") or discharged (" 0") . Pointer will normally stay centered while driving when battery is fully charged and no lights or accessories are in use.
7. TURN SIGNAL INDICATORS-Light flashes in unison with outside lights when turn signal is applied. On Monaco models the turn signal indicators are located, instead on the front edge of each front fender.
9
Page 16 of 46
Unusual Starting Conditions
Flooded En Int-Excessive "pumping" of the accelerator pedal may "flood" the engine,
causing a temporary no·start condition. A
strong odor of gasoline is an indication of a flooded engine. To start the engine under flooded conditions, depress the accelerator
pedal fully to the floor and hold there while
cranking untIl engine starts. Holding the accelerator fully to the floor opens the choke, allowing excess fuel to be eliminated from
the engine. Clearing the engine may take
about 10 seco'nds, depending on the amount
of excess fuel in the engine.
Extremely Cold Weather-When starting
your car at temperatures of zero or below,
depress the accelerator to the normal position
of one·third to one· half of Its full travel and crank the engine. Hold the key in the start
position until the engine is running. If the
engine attempts to start but does not, and the total engine cranking time required about 20 seconds, depress the accelerator all the
way to the floor until the engine starts run·
ning. If it does not start then return accelerator
to the one· third to one·half position and continue cranking. It may be necessary to repeat this procedure. NOTE: See "Recom·
mended Engine Oil Grades" and "If You Have an Automatic Transmission" in the
"Service Tips" section of this manual for recommendations regarding cold weather
starting. A larger capacity battery is available from your Dealer for use in extremely cold
areas.
BREAK·IN RECOMMENDATIONS-A
long break-in period is not required for your
new car. Drive moderately during the first 300 miles. After the initial 50 miles, speeds up to 50 or 60 mph are desirable. While cruising,
brief full·throttle accelerations contribute to a
good break·in (Within limits of state and local traffic laws). Wide· open throttle accelerations in low gear can be detrimental and should
be avoided for at least 500 miles. The oil installed in the engine at the factory is a high quality lubricant, classified "For
Service MS", and should be retained until
the first regular oil change. It is not unusual
for a new engine to use a certain amount of oil during this period. Have the oil level checked each time you stop for gasoline. If
oil is added, use only oils labeled on the con·
tainer "For Service MS" and of the weight required for the outside temperature, as
described on page 38.
11
Page 40 of 46
(CONTINUlU)
CAUTION: To prevent possible wiring damage, certain precautions should be observed: It IS essential when replacing the cables on the battery, or when uSing a "booster" battery, thai the positive cable IS attached to the positive post and the negative cable IS attached to Ihe negative post. The negative cable IS attached to the engine block. Battery posts are marked plus (+ ) and minus (-). Also, If a "fast charger" is used while battery IS in car, disconnect both car battery cables before connecting the charger to battery. Do not use a "fast charger" to provide starting voltage.
which requires the following service attention. Two types are used -one has a wrapper on the carburetor air cleaner, and other does not. With Wrapper: Do the following every 6 months-inspect venhlator valve operation, clean filler cap, InSpect and clean air cleaner element and wash outer wrapper In kerosene and shake or blot dry. Every year-replace ventilator valve. Every two years-replace air cleaner element and wrapper. Without Wrapper: Do the follOWing at each change of engine Oil-inspect ventilator valve operation, Inspect and clean air cleaner element. Every year-replace ventilator valve and replace air cleaner element. More frequent servicing Crankcase Ventilation System. The engine in may be required if the car IS used for short. your car was equipped at the factory with a trip driving and prolonged engine idling. posItive ventilating system to reduce the emission of harmful fumes into the at mos· Ant/·Freele. So that your cooling system Will phere. Periodic and proper inspection and operate without freezing and Without over· cleaning of thiS valve is essential for good heating due to rust formation, the following engine performance and durability. Valve procedures should be observed. operation should be checked every 6 months O . . . by your Dealer, and more frequently if car IS Fall. Open ~adlator dralncock and remo~e used for short-trip driVing and prolonged threaded drain plugs In engine block to drain engine idling. Replace valve once a year. cooling system. Mov~ heat~r selector lever to ''HI'' or "Heat" position (If so eqUipped) to A special crankcase ventilation system is permit draining the heater lines. Thoroughly used on cars built for the state of California flush cooling system with clear water, then
36
close radiator draincock and replace engine block drain plugs. Install MoPar Anti·Freeze (or other high-quality equivalent) to assure cooling system protection for the lowest anticipated temperature in the area where vehicle IS operated dUring the winter months. The cooling system should contain a minimum of 400:, anll-freeze for proper corrosion protection. I n geographiC areas where anli· freeze protecllon IS not necessary, after flushing, fill with clear water and add MoPar Rust ReSistor (or other hlgh·quality co~rosion inhibitor) to prevent the formation of rust deposits. This service IS reqUired annually.
It the vehicle was placed into service after January I , 1965, the first required Fall cooling system service may be eliminated. With the approach of cool weather, however, it IS very important to test the coolant for adequate anti-freeze protection and InSpect the system for eVidence of rust or leaks.
Only glycols and synthetic alcohol (Methanol) are acceptable bases for automobile antifreeze. Solutions containing salts, sugar, honey, glucose, mineral oils, kerosene or similar material should never be used in the cooling system.
@Coolant Level: Have the coolant level checked during each stop at the gasoline station. Add water to bring level to about I-~' below the bottom of the filler neck. Overfilling Will dilute the anti-freeze and also result In coolant loss through the overflow tube. CAUTION: DriVing in heavy traffic, at high altitudes, or In very hot weather may build up pressure in the cooling system. When removing the cap place a cloth over the cap, turn left to first stop, allowing steam to escape through overflow tube, then remove cap.
Page 41 of 46
E) Coolant Level: Have the coolant level checked during each stop at the gasoline station. Add water to bring level to about 11,4' below the bottom of the filler neck. Overfilling will dilute the anti·freeze and also result in coolant loss through the overflow tube. CAUTION: Driving In heavy traffic, at high altitudes, or in very hot weather may build up pressure in the cooling system. When removing the cap place a cloth over the cap, turn left to first stop, allowing steam to escape through overflow tube, then remove cap.
Thermostat Your new car is equipped with 180 degree thermostat for use with perma· nenl-type anti-freeze. If you later prefer an lcohol type anti-freeze use only a 160 degree thormoslat.
Manifold Heal Control Valve_ A cold engine will warm up faster and accelerate more moothly if the valve that controls heat flow In the manifold works freely. It is normal for I d deposits to accumulate in time on the y lve shaft causing it to tighten up'. Manifold II t Control Valve Solvent, available from your dealer, should be applied a t six month lnt Iva Is. Slide shaft in and out and rotate a
, w times to distribute the solvent. Apply only when manifold is cool.
The Carburetor A ir Filter. The special easy to change fire-resistant filter installed in your carburetor should be cleaned and inspected every 6 months and replaced once every two years, to assure good fuel economy. Clean or replace more often when car is driven in dusty or sandy areas. Replace filter if damaged. DO NOT wash or oil. Simply remove the metal container, unscrew the wing nut and lift out filter. Clean with compressed air, holding nozzle about two inches from filter.
Fuel Filter. Your new car has a filter in the fuel tank to prevent water and foreign material from entering the fuel system. There is also a fuel filter in the fuel line at the fuel pump outlet. If this filter is plugged it can limit car speed and cause hard starling. Under normal operating conditions the filter should be changed at 20,000 mile intervals, or every two years.
011 Cap Filler. The cap on the oil filler tube is a combination ventilator and permanent filter. The filter inside the cap should be kept clean to allow clean air to remove combustion product s from the crankcase. To clean the filter wash the entire cap periodically in k ero sene and relubricate with SAE 30 engine oil.
ENGINE PERFORMANCE EVALUATION
Engine operation efficiency depends on correct ignition, carburetor adjustments, and on valve lash where applicable. To obtain best engine performance, Chrysler Corporation recommends that the engine be evaluated every 10,000 miles and tuned, if necessary. Services performed during this evaluation should include the following:
SPARK PLUGS-Remove and inspect each spark plug. Most plugs can be cleaned, adjusted, and reinstalled. Rough idle, hard starling, frequent engine miss at high speeds, or apparent physical deterioration, are indications that the spark plugs should be replaced.
DISTRIBUTOR-Clean and inspect the dis· tributor cap and rotor if required (wash cap in household detergent and water solution). Check breaker points for abnormal pitting. distributor secondary wires and tower caps are clean and connected properly. See that ignition timing is set to vehicle specifications.
CARBURETOR-Remove and clean air filter. Check operation of manifold heat control valve and choke diaphragms, use solvent recommended. Clean crankcase ventilator system. Check and adjust choke fast-idle cam and fuel mixture.
BATTERY-Check specific gravity. Clean and tighten terminals; apply grease to post and terminals. Check circuit voltages.
37
Page 42 of 46
ENGINE OIL REQUIREMENTS
FIRST OIL CHANGE. The engine oil installed in your car's engine at time of assembly is h igh quality, "For Service MS" oil and
need not be removed until the first scheduled
oil change_ "Break-in" or "Flush-type" oils are no longer required in you r car's advanced
design engine and m ust be avoided.
WHEN TO ADD OIL It is not unusual for
a new engine to use a certain amount of engine oil during the break-in period. Check
oil level during each stop for gasoline. Add oil only when level on dipstick is al or below
the "ADD OIL" mark.
WHEN TO CHANGE OIL Regul.,. 011 changes .,.e required to provide proper engine operation.
Highway Driving, combined with some short
trip, slower speed operations extends the 38
effectiveness of the engine oil and permits you to change 011 at 4,000 miles Intervals.
Short Trips (less than 10 miles) and slow speeds, such as to the store, school, work
etc. and home again before the engine warms up, causes harmful condensation and sludge formation. This is typical of car operation in
city traffic. Driving under these conditions re
quires that you change 011 every 3 months regardless of mileage.
Severe Operating Conditions, such as fre
quent driving on dusty roads, or in sandy geographic areas, or unusually short trip
driving in cold weather may reasonably require 011 changes more frequently than
every three months. Under these conditions, consult and follow the advice of any Authorized Chrysler Motors Corporation Dealer's
Service Manager.
Shaded area covers region where minimum temperatures are consistently below + 10"F. during
winter months.
RE MMENDED ENGINE OIL GRADE
Multigrade Oils: SAE 20W-40 Suitable when temperatures are co nsistently abovl! + 32°F. SAE 10W·30 Suitable year-round for most parts of the United States; may be used where temperatures occasionally drop as low as -10°F . SAE 5W·20 Recommended where minimu m temperatures are consistently below + 10°F . durin g winter months, see map. Low viscosity o ils make en~ine starting easier in cold weather. Modern SAE 5W-20 grade oils may be safely used when minimum temperatures are expected to be consistently below + 10°F. Single Grade Oils. SAE 30 When temperature ranges averag e co nsistently above 32°F . SAE lOW When temperature ranges average between + 32° F . and -10°F .
Page 45 of 46
SPECIFICATIONS, CAPACITIES AND DATA
License Data
Vehicle Number:
Stamped on plate on I It Ir nl d r I, visible when door IS op n .
Engine Number :
Stamped on boss und r d lIibulol
Fluid Capacities
Fuels-25 gals.; Station Wagoll
Engine Oil-4 qts., add 1 ql. with IiII r h 11M Cooling System-16 qts., dd 1 ql with hi ,II I
Transmissions-Manual 3 p d ~ III speed 7~ pi ., Automat I'M pi . Rear Axle-4 pts. Power Steering-4 pts.
Light Bulbs Number
It d Lights ower Light. ............................................................................... .. " 2 Upper Light .................................................................................... 1 In Irument Cluster ........................................................................ '" . . .. . . . 158 f r n smisslon Drive Selector. . . . . . .. .. .. . .. .. . .. . .. .. .. .. . . .. .. . .. .. . .. . .. .. • . .. . .. .. . .. .. . . .. . . . .... S3X II t r and/or Air Conditioning Controls. .. . . . . . . . . . . . . . . . . . . . . . .• . . . . . . . . . . . • . . . . . . . . . . . . . . . . . . . . . . . .. 53X SWitch Tilles ....................................................................................... 53X R dlo 01 I......................................................................................... 1893 flunk ....................................................................................... 1004 Turn Signal, front and rear ... ....................................................................... 1034 P rking .......................................................................................... 1034 Dom .................................. _ ...................................................... 1004 LI nS8 Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 67 lOP nd Tail .................................. ... ................................................. 1034 13 k up ...................................................... .................. ........... ..... 1073
Engine Specifications 2·Barrel Carbo 4·Barrel Carbo 4 -Barrel Carbo 4 ·Barrel Carbo 383 cu. in. 383 cu. in. 413 cu. in. 426 cu. in.
Bor ... ...................... 4.25' 4.25' 4.19' 4.25' trok .................... '" 3.375' 3.375' 3.150' 3.750' Compr ssion Ratio ................ 9.2:1 10.0· 1 10.0:1 10.3:1 II rllter ....................... . Full Flow Spin On Full Flow Spin On Full Flow Spin On Full Flow Spin On oohng System Pressure .......... 14 psi 14 psi 14 psi 14 psi rh rmostal...................... 1SO° lS00 1SO° 1SO°
I nllion Timing ................... 10° BTC 10" BTC 10° BTC 10° BTC BI k r POlOt Gap ................. 014·.019' .014·.019' .014,.019' .014·.019' p rk Plug Gap and Number ........ 035', J -14-Y or .035', J ·14-Y or .035', J -I0·Y or .035', J-lO·Y or P -3 ·6P P -3 ·6P P -3 ·3P P -3 ·3P rllmg Order .................... 1·8·4·3·6·5-7·2 1·8 ·4 -3 ·6 ·5 ·7 ·2 1·8 ·4 ·3 -6 ·5 ·7·2 1·8·4·3 ·6 ·5 ·7·2 IILl • ........................ Relwlar Premium Prl!millm Prl>mium 41