bulb DODGE POWER WAGON 2007 2.G User Guide

DODGE POWER WAGON 2007 2.G User Guide POWER WAGON 2007 2.G DODGE DODGE https://www.carmanualsonline.info/img/12/5677/w960_5677-0.png DODGE POWER WAGON 2007 2.G User Guide

Page 434 of 492

DODGE POWER WAGON 2007 2.G User Guide 5. Unlock and pull connector straight from the base of
the headlight halogen bulb.
6. Twist connector on the side marker/turn signal/park
light bulb
1¤4turn and remove connector and bulb from
housing

Page 435 of 492

DODGE POWER WAGON 2007 2.G User Guide 7. Remove housing from vehicle with headlight halogen
bulb in housing.
8. Twist the headlight halogen bulb
1¤4turn and remove
headlight bulb from the housing.
9. Replace headlight or side marker/turn

Page 436 of 492

DODGE POWER WAGON 2007 2.G User Guide 2. Pull the housing straight out from the body, with a
quick motion, to separate the housing from the body. If
not pulled straight, locators may be damaged.3. Rotate the bulb socket counterclockwise t

Page 437 of 492

DODGE POWER WAGON 2007 2.G User Guide 4. Pull bulb straight out of socket. 5. Reverse Procedure to install bulb and housing. Place
the two raised blocks passed the body.
Pulling Bulb From Socket
Sliding Raised Blocks Past Body
436 MAINTAI

Page 438 of 492

DODGE POWER WAGON 2007 2.G User Guide Center High-Mounted Stoplight With Cargo Light
1. Remove the two (2) screws holding the housing/lens
to the body as shown.2. Separate the connector holding the housing and wir-
ing harness to the body

Page 439 of 492

DODGE POWER WAGON 2007 2.G User Guide 4. Pull desired bulb straight from the socket.
²Outside Bulbs: Cargo Lamps
²Inside Bulb: Center High Mount Stop Lamp
5. Reverse procedure for installation of bulbs and hous-
ing.
Cab Top Clearance L

Page 440 of 492

DODGE POWER WAGON 2007 2.G User Guide 2. Rotate the socket1¤4turn and pull it from the light
assembly.3. Pull the bulb straight from its socket and replace.
MAINTAINING YOUR VEHICLE 439
7

Page 441 of 492

DODGE POWER WAGON 2007 2.G User Guide Fog Lights
1. Reach under the vehicle, unlock and twist connector
counterclockwise1¤4turn and remove connector and bulb
from housing.
2. Pull bulb straight from the connector.3. Reverse procedure for

Page 476 of 492

DODGE POWER WAGON 2007 2.G User Guide Bar, Stabilizer/Sway System................ 267
Battery............................... 396
Emergency Starting..................... 375
Saving Feature (Protection)............... 120
Bearings..........

Page 482 of 492

DODGE POWER WAGON 2007 2.G User Guide Key, Sentry (Immobilizer)................... 16
Keyless Entry System...................... 20
Keys................................. 12
Lane Change and Turn Signals.............. 123
Lap Belts.........
Page:   < prev 1-10 11-20