sensor DODGE RAM 1999 Service Repair Manual
[x] Cancel search | Manufacturer: DODGE, Model Year: 1999, Model line: RAM, Model: DODGE RAM 1999Pages: 1691, PDF Size: 40.34 MB
Page 543 of 1691
IGNITION SWITCHES
INDICATOR LIGHTS
KEYLESS ENTRY KEYPADS AND TRANSMITTERS
KEYLESS ENTRY TRANSMITTERS
LEDS
LENSES
MICROPHONES
MIRRORS (ELECTROCHROMATIC AND HEATED)
MOTORS
NEUTRAL SAFETY SWITCHES
ODOMETERS
ODOMETERS, SPEEDOMETERS AND TACHOMETERS (CABLE-DRIVEN)
PULLEYS
RECEIVERS, AMPLIFIERS, EQUALIZERS AND SUB-WOOFER VOLUME CONTROLS
RELAY BOXES
RELAYS
SEALED BEAMS
SEAT HEATERS
SECURITY ALARM SENSORS
SIRENS
SOLENOIDS
SPEAKERS AND MICROPHONES
SPEEDOMETER AND TACHOMETER LINKAGES AND CABLES
SPEEDOMETER CABLES
SPEEDOMETERS
STARTERS
SUB-WOOFER VOLUME CONTROLS
SWITCHES
TACHOMETER CABLES
TACHOMETERS
TAPE PLAYERS AND CD PLAYERS
TENSIONERS
TIMERS
TIRE PRESSURE SENSORS
TRANSCEIVERS
TRANSDUCERS
VACUUM ACCUMULATORS (RESERVOIRS)
VACUUM RESERVOIRS
VOLTAGE REGULATORS
WASHER FLUID LEVEL SENDERS
WASHER PUMPS
WIPER ARMS AND BLADES
WIPER BLADES
WIPER HOSES AND NOZZLES
WIPER LINKAGES
WIPER NOZZLES
WIPER PUMP RESERVOIRS
WIRING HARNESSES AND CONNECTORS
INTRODUCTION TO MOTORIST ASSURANCE PROGRAM (MAP)
OVERVIEW OF MOTORIST ASSURANCE PROGRAM
The Motorist Assurance Program is the consumer outreach
effort of the Automotive Maintenance and Repair Association, Inc.
(AMRA). Participation in the Motorist Assurance Program is drawn from
retailers, suppliers, independent repair facilities, vehicle
manufacturers and industry associations.
Our organization's mission is to strengthen the relationship
between the consumer and the auto repair industry. We produce
materials that give motorists the information and encouragement to
take greater responsibility for their vehicles-through proper,
Page 561 of 1691
![DODGE RAM 1999 Service Repair Manual CRUISE CONTROL VACUUM HOSES, TUBES AND RESERVOIRS
CRUISE CONTROL VACUUM HOSE, TUBE AND RESERVOIR INSPECTION \
\
\
\](/img/12/56915/w960_56915-560.png "DODGE RAM 1999 Service Repair Manual CRUISE CONTROL VACUUM HOSES, TUBES AND RESERVOIRS
CRUISE CONTROL VACUUM HOSE, TUBE AND RESERVOIR INSPECTION \
\
\
\")
CRUISE CONTROL VACUUM HOSES, TUBES AND RESERVOIRS
CRUISE CONTROL VACUUM HOSE, TUBE AND RESERVOIR INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Leaking ................. A .. Require repair or replacement.
Melted .................. A ............ Require replacement.
Missing ................. C ............ Require replacement.
Oil-soaked (spongy) ..... 1 ............ Suggest replacement.
Restricted .............. A .. Require repair or replacement.
Surface cracks (dry-
rotted) ................ 1 ............ Suggest replacement.
\
\
\
\
\
\
\
CRUISE CONTROL VEHICLE SPEED SENSORS
CRUISE CONTROL VEHICLE SPEED SENSOR INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Air gap incorrect ....... B ....... ( 1) Require adjustment to
vehicle manufacturer's
specifications.
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Broken .................. A ............ Require replacement.
Housing cracked ......... A ............ Require replacement.
Internal resistance
does not meet
specifications ......... B ........ ( 2) Require replacement.
Lead routing incorrect .. B .. Require rerouting according to
vehicle manufacturer's
specifications.
Loose ................... B ....... ( 3) Require adjustment to
vehicle manufacturer's
specifications.
Missing ................. C ............ Require replacement.
Output signal incorrect . B ........... ( 2) Require repair or
replacement.
Surface contaminated .... 2 .. Suggest cleaning; identify and
correct source.
Tip bent ................ B ............ Require replacement.
Tip broken .............. B ............ Require replacement.
Tip missing ............. B ............ Require replacement.
Wire lead burned ........ A ............ Require replacement.
Wire lead conductors
exposed ................ B ............ Require replacement.
Wire lead corroded ...... A ............ Require replacement.
Wire lead open .......... A ............ Require replacement.
Wire lead shorted ....... A ............ Require replacement.
( 1) - If a sensor is not adjustable, further inspection is
required to identify and correct cause.
( 2) - Component failure may be caused by water intrusion into
the wiring harness. Always check insulation for damage
Page 562 of 1691
![DODGE RAM 1999 Service Repair Manual and wiring for excessive resistance.
(3) - Some integral bearing assemblies with sensors may require
replacement.
\
\
\](/img/12/56915/w960_56915-561.png "DODGE RAM 1999 Service Repair Manual and wiring for excessive resistance.
(3) - Some integral bearing assemblies with sensors may require
replacement.
\
\
\")
and wiring for excessive resistance.
(3) - Some integral bearing assemblies with sensors may require
replacement.
\
\
\
\
\
\
\
DEFOGGERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
DEFROSTERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
DELAYS
DELAY INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Binding, affecting
performance ............ A .. Require repair or replacement.
Binding, not affecting
performance ............ 2 .. Suggest repair or replacement.
Broken .................. A .. Require repair or replacement.
Burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Burned, not affecting
performance ............ 2 ........... ( 1) Suggest repair or
replacement.
Cracked, affecting
performance ............ A .. Require repair or replacement.
Cracked, not affecting
performance ............ 1 .. Suggest repair or replacement.
Inoperative ............. A ........... ( 2) Require repair or
replacement.
Melted, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Melted, not affecting
performance ............ 2 ........... ( 1) Suggest repair or
replacement.
Missing ................. C ............ Require replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
Page 578 of 1691
![DODGE RAM 1999 Service Repair Manual SEAT HEATERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
SECURITY ALARM SENSORS
SECURITY ALARM SENSOR INSPECTION \](/img/12/56915/w960_56915-577.png "DODGE RAM 1999 Service Repair Manual SEAT HEATERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
SECURITY ALARM SENSORS
SECURITY ALARM SENSOR INSPECTION \")
SEAT HEATERS
See
HEATING ELEMENTS (DEFROSTERS, DEFOGGERS, ELECTRIC HEATERS AND SEATS) .
SECURITY ALARM SENSORS
SECURITY ALARM SENSOR INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware threads
damaged ................ A ... Require repair or replacement
of hardware.
Attaching hardware threads
stripped (threads
missing) ............... A ... Require repair or replacement
of hardware.
Connector broken ........ A .. Require repair or replacement.
Connector melted ........ A ........... ( 1) Require repair or
replacement.
Connector missing ....... C ............ Require replacement.
Inoperative ............. B ........... ( 2) Require repair or
replacement. Further
inspection required.
Missing ................. C ............ Require replacement.
Resistance out of
specification .......... B .. Require repair or replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal loose, affecting
performance ............ B .. Require repair or replacement.
Terminal loose, not
affecting performance .. 1 .. Suggest repair or replacement.
Threads damaged ......... A .. Require repair or replacement.
Threads stripped (threads
missing) ............... A ............ Require replacement.
Wire lead conductors
exposed ................ B .. Require repair or replacement.
Wire lead corroded ...... A .. Require repair or replacement.
Wire lead open .......... A .. Require repair or replacement.
Wire lead shorted ....... A .. Require repair or replacement.
( 1) - Determine cause and correct prior to repair or
replacement of part.
( 2) - Inoperative includes intermittent operation or out of OEM
specification.
\
\
\
\
\
\
\
SIRENS
Page 586 of 1691
![DODGE RAM 1999 Service Repair Manual (2) - Inoperative includes intermittent operation or out of OEM
specification.
\
\
\
\
\](/img/12/56915/w960_56915-585.png "DODGE RAM 1999 Service Repair Manual (2) - Inoperative includes intermittent operation or out of OEM
specification.
\
\
\
\
\")
(2) - Inoperative includes intermittent operation or out of OEM
specification.
\
\
\
\
\
\
\
TIRE PRESSURE SENSORS
TIRE PRESSURE SENSOR INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Inoperative ............. A ........... ( 1) Require repair or
replacement.
Loose ................... A .. Require repair or replacement.
Missing ................. C ............ Require replacement.
( 1) - Inoperative includes intermittent operation or out of OEM
specification.
\
\
\
\
\
\
\
TRANSCEIVERS
TRANSCEIVER INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Connector broken ........ A .. Require repair or replacement.
Connector melted ........ A ........... ( 1) Require repair or
replacement.
Connector missing ....... C ............ Require replacement.
Malfunctioning .......... A ........... ( 2) Require repair or
replacement.
Missing ................. C ............ Require replacement.
Sound quality poor ...... A ........... ( 3) Require repair or
replacement.
Terminal broken ......... A .. Require repair or replacement.
Terminal burned, affecting
performance ............ A ........... ( 1) Require repair or
replacement.
Terminal burned, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal corroded,
affecting performance .. A .. Require repair or replacement.
Terminal corroded, not
affecting performance .. 2 .. Suggest repair or replacement.
Terminal loose, affecting
Page 597 of 1691
![DODGE RAM 1999 Service Repair Manual \
\b\
\
\
\b\
\
\
5.2L V8 SFI PCV, EVAP, TWC, FR, (](/img/12/56915/w960_56915-596.png "DODGE RAM 1999 Service Repair Manual \
\b\
\
\
\b\
\
\
5.2L V8 SFI PCV, EVAP, TWC, FR, (")
\
\b\
\
\
\b\
\
\
5.2L V8 SFI PCV, EVAP, TWC, FR, (
2) EVAP-PSOL, EVAP-PRRV,
Ram Pickup SPK, (
1) HO2S, CEC, ( 2)( 6) EVAP-LDP,
MIL (
6) EVAP-LDPF,
(
6) EVAP-VV, EVAP-VC,
SPK-CC
\
\b\
\
\
\b\
\
\
5.2L V8 SFI PCV, EVAP, TWC, FR, (
2) EVAP-PSOL, EVAP-PRRV,
Ram Van & SPK, (
1) HO2S, CEC, ( 2)( 3) EVAP-LDP,
Ram Wagon MIL (
3) EVAP-LDPF,
(
5) EVAP-VV, EVAP-VC,
SPK-CC
\
\b\
\
\
\b\
\
\
5.2L V8 CNG PCV, TWC, SPK, SPK-CC
Ram Van & (
1) HO2S, CEC, MIL
Ram Wagon
\
\b\
\
\
\b\
\
\
5.9L V8 SFI PCV, EVAP, TWC, FR, (
2) EVAP-PSOL, EVAP-PRRV,
Dakota SPK, (
7) HO2S, CEC, ( 2)( 3) EVAP-LDP,
MIL (
3) EVAP-LDPF,
(
5) EVAP-VV, EVAP-VC,
SPK-CC
\
\b\
\
\
\b\
\
\
5.9L V8 SFI PCV, EVAP, TWC, FR, (
2) EVAP-PSOL, EVAP-PRRV,
Durango SPK, (
1) HO2S, CEC, ( 2)( 3) EVAP-LDP,
MIL (
3) EVAP-LDPF, ( 5) EVAP-VV,
EVAP-VC, SPK-CC
\
\b\
\
\
\b\
\
\
5.9L V8 SFI PCV, EVAP, (
8) TWC, ( 2) EVAP-PSOL, EVAP-PRRV,
Ram Pickup FR, SPK, (
9) AP, ( 2)( 6) EVAP-LDP,
(
1) HO2S, CEC, ( 6) EVAP-LDPF,
(
9) SRI, MIL ( 6) EVAP-VV, EVAP-VC,
SPK-CC, (
9) AP-RV,
(
1)( 9) AP-CKV
\
\b\
\
\
\b\
\
\
5.9L V8 SFI PCV, EVAP, TWC, FR, (
2) EVAP-PSOL, EVAP-PRRV,
Ram Van & SPK, (
1) HO2S, CEC, ( 2)( 3) EVAP-LDP,
Ram Wagon MIL (
3) EVAP-LDPF,
(
5) EVAP-VV, EVAP-VC,
SPK-CC
\
\b\
\
\
\b\
\
\
5.9L 6-Cyl. AIH, MIL AIH-TS
Turbo Diesel
24-Valve EFI
Ram Pickup
\
\b\
\
\
\b\
\
\
8.0L V10 SFI (
4) CCV, EVAP, ( 2) EVAP-PSOL, EVAP-PRRV,
Ram Pickup (
10) TWC, FR, SPK, ( 2)( 6) EVAP-LDP,
(
9) AP, ( 11) HO2S, ( 6) EVAP-LDPF,
CEC, MIL (
6) EVAP-VV, EVAP-VC,
SPK-CC, (
9) AP-RV,
(
1)( 9) AP-CKV
\
\
\
\
\
\
\
(
1) - Two are required.
(
2) - Electronically controlled.
(
3) - Calif. emission vehicles only.
(
4) - Fixed orifice system without a PCV valve.
(
5) - Except Calif. emission vehicles only.
(
6) - Applies to some models. Refer to underhood vehicle emission
control label for application.
(
7) - On 2WD models, four sensors are used. One on each bank, and
one before and after catalytic converter. On 4WD models, two
sensors are used. One before and after catalytic converter.
Page 598 of 1691
(8) - One used on vehicles with light-duty emissions. Two used on
vehicles with heavy-duty emissions.
(
9) - Used on vehicles with heavy-duty emissions.
(
10 ) - Two catalytic converters are required.
(
11 ) - Four sensors used on vehicles with medium-duty emissions.
Two sensors used on vehicles with heavy-duty emissions.
\
\
\
\
\
\
\
\f
ABBREVIATIONS
ABBREVIATION DEFINITIONS\
\
\
\
\
\
Abbreviation Definition
AIH ................................... Air Intake Heaters
AIH-TS ............................ AIH Temperature Sensor
AP ............................. Air Pump Injection System
AP-CKV .................................... AP Check Valve
AP-RV .................................... AP Relief Valve
BP/EGR ........................... Backpressure EGR System
BP/EGR-BPT ................ BP/EGR Backpressure Transducer
CCV ................................ Crankcase Ventilation
CEC ......................... Computerized Engine Controls
CNG ............................... Compressed Natural Gas
EFI ............................ Electronic Fuel Injection
EGR-CKV .................................. EGR Check Valve
EVAP ............................. Fuel Evaporative System
EVAP-CVV ........................ EVAP Canister Vent Valve
EVAP-LDP ........................ EVAP Leak Detection Pump
EVAP-LDPF ................ EVAP Leak Detection Pump Filter
EVAP-PRRV ............ EVAP Pressure Relief Rollover Valve
EVAP-PSOL ............................ EVAP Purge Solenoid
EVAP-VC .............................. EVAP Vapor Canister
EVAP-VV ........................... EVAP Ventilation Valve
FR ................................... Fillpipe Restrictor
HO2S ................................ Heated Oxygen Sensor
MIL .......................... Malfunction Indicator Light
PCV ....................... Positive Crankcase Ventilation
SFI .................. Sequential Multiport Fuel Injection
SPK ....................................... Spark Controls
SPK-CC ........................... SPK Computer Controlled
TWC ........................ Three-Way Catalytic Converter
\
\
\
\
\
\
Page 611 of 1691
These 3 orifices are opened and closed by electric solenoids. The
solenoids are, in turn, controlled by the Electronic Control Module
(ECM). When a solenoid is energized, the armature with attached shaft
and swivel pintle is lifted, opening the orifice. See Fig. 11.
The ECM uses inputs from the Coolant Temperature Sensor
(CTS), Throttle Position Sensor (TPS) and Mass Airflow (MAF) senso\
rs
to control the EGR orifices to make 7 different combinations for
precise EGR flow control. At idle, the EGR valve allows a very small
amount of exhaust gas to enter the intake manifold. This EGR valve
normally operates above idle speed during warm engine operation.
Verify EGR valve is present and not modified or purposely
damaged. Ensure thermal vacuum switches, pressure transducers, speed
switches, etc., (if applicable) are not by-passed or modified. Ensure
vacuum hose(s) to EGR valve is not plugged. Ensure electrical
connector to EGR valve is not disconnected.
Fig. 11: Typical Digital EGR Valve
Courtesy of General Motors Corp.
Integrated Electronic EGR Valve
This type functions similar to a ported EGR valve with a
Page 612 of 1691
remote vacuum regulator. The internal solenoid is normally open, which
causes the vacuum signal to be vented off to the atmosphere when EGR
is not controlled by the Electronic Control Module (ECM). The solenoid\
valve opens and closes the vacuum signal, controlling the amount of
vacuum applied to the diaphragm. See Fig. 12.
The electronic EGR valve contains a voltage regulator, which
converts ECM signal and regulates current to the solenoid. The ECM
controls EGR flow with a pulse width modulated signal based on
airflow, TPS and RPM. This system also contains a pintle position
sensor, which works similarly to a TPS sensor. As EGR flow is
increased, the sensor output increases.
Verify EGR valve is present and not modified or purposely
damaged. Ensure thermal vacuum switches, pressure transducers, speed
switches, etc., (if applicable) are not by-passed or modified. Ensure
electrical connector to EGR valve is not disconnected.
Fig. 12: Cutaway View Of Typical Integrated Electronic EGR Valve
Courtesy of General Motors Corp.
SPARK CONTROLS (SPK)
Page 613 of 1691
Spark control systems are designed to ensure the air/fuel
mixture is ignited at the best possible moment to provide optimum
efficiency and power and cleaner emissions.
Ensure vacuum hoses to the distributor, carburetor, spark
delay valves, thermal vacuum switches, etc., are in place and routed
properly. On Computerized Engine Controls (CEC), check for presence of\
required sensors (O2, MAP, CTS, TPS, etc.). Ensure they have not been
tampered with or modified.
Check for visible modification or replacement of the feedback
carburetor, fuel injection unit or injector(s) with a non-feedback
carburetor or fuel injection system. Check for modified emission-
related components unacceptable for use on pollution-controlled
vehicles.
AIR INJECTION SYSTEM (AIS)
Air Pump Injection System (AP)
The air pump is a belt-driven vane type pump, mounted to
engine in combination with other accessories. The air pump itself
consists of the pump housing, an inner air cavity, a rotor and a vane
assembly. As the vanes turn in the housing, filtered air is drawn in
through the intake port and pushed out through the exhaust port. See
Fig. 13 .
Check for missing or disconnected belt, check valve(s),
diverter valve(s), air distribution manifolds, etc. Check air
injection system for proper hose routing.
Fig. 13: Typical Air Pump Injection System
Courtesy of General Motors Corp.
Pulsed Secondary Air Injection (PAIR) System
PAIR eliminates the need for an air pump and most of the
associated hardware. Most systems consists of air delivery pipe(s),
pulse valve(s) and check valve(s). The check valve prevents exhaust
gases from entering the air injection system. See Fig. 14.
Ensure required check valve(s), diverter valve(s), air
distribution manifolds, etc., are present. Check air injection system
for proper hose routing.