fold seats DODGE RAM SRT-10 2006 Service User Guide

4. Install the nuts (2 and 4) attaching the center seat
section to the other seat, and tighten to 25 Nꞏm (18
ft. lbs.).
5. Connect the electrical connectors (1).
6. Roll the seat assembly forward and install new rear
bolts (2). Tighten the bolts (2) to 40 Nꞏm (30 ft.
lbs.).
7. Fold the seat backs up and slide the seats (1) to
the rear.
8. Install new front bolts (4) and tighten to 28 Nꞏm (21
ft. lbs.).

SEAT - REAR
REMOVAL
1. Remove the load floor (Refer to 23 - BODY/INTE-
RIOR/LOAD FLOOR - REMOVAL).
2. Fold the rear seat cushions up and remove the
rear bolts (1, 3, and 5).
3. Lift each seat assembly up and disengage the seat
back frame hooks (1 and 3) from the footmans
loops (2 and 4) bolted to the rear cab back.
4. Remove the seats from the vehicle.