wipers DODGE RAM SRT-10 2006 Service Repair Manual

COWL GRILLE
REMOVAL
1. Remove the wiper arms (Refer to 8 - ELECTRI-
CAL/WIPERS/WASHERS/WIPER ARMS -
REMOVAL).
2. Disconnect the cowl plenum washer hose from the
washer supply hose at the molded plastic in-line fit-
ting (Refer to 8 - ELECTRICAL/WIPERS/WASH-
ERS/WASHER HOSES/TUBES - DESCRIPTION).
3. Remove the cowl weather seal from the front of the
dash panel and the cowl grille (2).
4. Remove the six push pin fasteners (1) that secure
the front of the cowl grille to the dash panel.
5. Remove the two screws (3) that secure the rear
corners of the cowl grille to the dash panel and
remove the grille.
6. If necessary, remove the washer nozzles and the
cowl plenum washer hose from the cowl grille
(Refer to 8 - ELECTRICAL/WIPERS/WASHERS/WASHER NOZZLE - REMOVAL).
INSTALLATION
1. If removed, install the washer nozzles and the cowl
plenum washer hose onto the cowl grille (2) (Refer
to 8 - ELECTRICAL/WIPERS/WASHERS/WASHER
NOZZLE - INSTALLATION).
2. Position the cowl grille onto the dash panel.
3. Install the two screws (3) and the six push-pin fas-
teners (1) that secure the cowl grille to the dash
panel.
4. Install the cowl weather seal onto the front of the
dash panel and the cowl grille.
5. Connect the cowl plenum washer hose to the
washer supply hose at the molded plastic in-line fit-
ting (Refer to 8 - ELECTRICAL/WIPERS/WASH-
ERS/WASHER HOSES/TUBES - DESCRIPTION).
6. Install the wiper arms (Refer to 8 - ELECTRICAL/
WIPERS/WASHERS/WIPER ARMS - INSTALLA-
TION).