warning DODGE SPRINTER 2008 2.G Owners Manual

410 OperationMaintenance and servicing
4
Mechanical elements and the lubricants
used for them must be carefully
matched.
For this reason, only brands tested and
approved by the manufacturer should be
used. Please contact your Sprinter Deal-
er to obtain the necessary information.
No lubricant additives should be used.
The use of such additives could affect
your warranty rights. Information is
available from any authorized Sprinter
Dealer.For specifications of engine oils, coolant
and brake fluid, see "Service products
and capacities" (
\2
page 604) and con-
tact your authorized Sprinter Dealer.
Observe the information on spare parts
in the “Technical data” section
(
\2
page 600).
Warning (Continued)
G
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at an authorized Sprinter
Dealer.
Service products
Warning
G
If handled incorrectly, service products
can constitute a health risk for people and
an environmental hazard.
Always observe relevant guidelines for
handling, storing and disposing of service
products.
nf_BA.book Page 410 Friday, January 25, 2008 3:53 PM

416 OperationCleaning and care of the vehicle
4
\3 Cleaning and care of the vehicleRegular and proper care will help to
maintain the value of your vehicle. The
best way to protect your vehicle from
harmful environmental influences is to
wash it and use protective treatments
regularly.Scratches, corrosive deposits, areas af-
fected by corrosion and damage caused
by neglect or inadequate care cannot al-
ways be completely remedied. In such
cases, visit an authorized Sprinter Deal-
er.
Repair damage caused by loose chip-
pings and remove the following sub-
stances immediately:
\4
Insect remains
\4
Bird droppings
\4
Tree resin
\4
Oils and grease
\4
Fuel
\4
Tar stainsWash the vehicle more frequently in win-
ter to remove salt residue.
iIt is recommended that you use
Mopar care products. These have
been specially adapted to Sprinter
vehicles and are state of the art.
Mopar care products are available
from any authorized Sprinter Dealer.
Warning
G
Always follow the instructions for using
the care products.
Always keep care products sealed and out
of the reach of children.
Do not use fuel as a cleaning agent. Fuel
is flammable and constitutes a health haz-
ard.
nf_BA.book Page 416 Friday, January 25, 2008 3:53 PM

420 OperationCleaning and care of the vehicle
4
Steps Engine cleaning Light-alloy wheels*
Clean light-alloy wheels on a regular ba-
sis.
Warning
G
Dirty or iced-up steps and entrances cre-
ate a risk of slipping or falling.
Keep steps, entrances and footwear free
from dirt (e.g. mud, clay, snow and ice).
!
CAUTION
Do not allow water to enter the in-
take and ventilation openings.
When cleaning with high-pressure
water or steam cleaners, the spray
must not be aimed directly at electri-
cal components or at the end of elec-
trical lines.
Treat the engine with preservative
agents after cleaning. Protect the
belt drive system from the preserva-
tive when you do so.
!
CAUTION
Do not use any acidic or alkaline
cleaning agents. They can cause cor-
rosion of the wheel bolts (wheel
nuts) or the balancing weight retain-
ers.
nf_BA.book Page 420 Friday, January 25, 2008 3:53 PM

421 Operation
Cleaning and care of the vehicle
4
Outside of windshield and wiper
blades
\1
Turn key to position
1 in ignition lock
(
\2
page 111).
\1
Switch on windshield wipers
(\2
page 210).
\1
When the wiper arms are vertical,
turn key to position
0 in the ignition
lock or remove the key.
\1
Fold the wiper arms away from the
windshield until you feel them en-
gage in place.
\1
You can now clean the windshield
and the wiper blades.
\1
Fold the windshield wipers back
again before you switch on the igni-
tion.
Windows
!
CAUTION
Do not fold the windshield wipers
away from the windshield unless the
hood is closed. You will otherwise
damage the hood.
Warning
G
Switch off the ignition before cleaning the
windshield or the wiper blades. The wind-
shield wipers could otherwise move and
injure you.
!
CAUTION
Do not use a dry cloth, abrasive ma-
terial, solvent or solvent-based clean-
ing agent to clean the inside of the
windows. Clean the inside of the win-
dows with a damp cloth or a commer-
cially available glass cleaner. Do not
touch the inside of the rear and side
windows with hard objects, such as
an ice scraper or a ring. You could
otherwise damage the windows or
the rear window heating.
nf_BA.book Page 421 Friday, January 25, 2008 3:53 PM

424 OperationCleaning and care of the vehicle
4
Heavy soiling
\1
Wipe plastic parts with a damp, lint-
free cloth (e.g. a micro-fiber cloth).
Dashboard and padded boss of the
steering wheel
\1
Moisten a clean and lint-free cloth
with water and clean the plastic
parts and the dashboard.
\1
Use a mild soap solution for particu-
larly stubborn dirt.
Radio* display and rear view cam-
era* monitor
\1
Switch off the Radio* or the rear
view camera monitor* and allow it to
cool off.
!
CAUTION
Use a low-foaming grease solvent
(e.g. washing-up liquid) diluted in wa-
ter as a cleaning agent.
The surface color may temporarily
change shade during cleaning. Sim-
ply wait for the surface to dry.
!
CAUTION
Use a solvent-free and non-caustic
cleaning agent. The manufacturer
recommends that you use a
Mercedes-Benz product.
The surface color may temporarily
change shade during cleaning. Sim-
ply wait for the surface to dry.
Warning
G
Do not use cleaners or cockpit care
sprays containing solvents to clean the
dashboard or the padded boss of the
steering wheel. Cleaners containing sol-
vents can make the surface porous, which
could lead to serious injuries if plastic
parts were to come loose when an airbag
is triggered.
nf_BA.book Page 424 Friday, January 25, 2008 3:53 PM

425 Operation
Cleaning and care of the vehicle
4
\1
Clean the display surface with a
commercially-available microfiber
cloth and cleaner for TFT/LCD dis-
plays.
\1
After drying, wipe the display surface
with a dry microfiber cloth using only
slight pressure.
Seat beltsRemove stains or dirt immediately to
prevent damage or the build-up of resi-
dues.
!
CAUTION
D o n o t u s e d r y , c o a r s e o r h a r d c l o t h s ,
abrasive material, solvent or solvent-
based cleaning agent. Do not scrub
or use high pressure.
You will otherwise damage the
pressure- and scratch-sensitive dis-
play surface.
!
CAUTION
Clean the seat belts with a mild wash-
ing solution. Do not dry the seat belts
in direct sunlight or at temperatures
above 176 °F (80 °C).
!
Do not bleach or dye the seat
belts. This could impair the function
of the seat belts.
After driving off-road or on
construction sitesWarning
G
Dirt on the vehicle can affect road and op-
erating safety.In particular, the following dangers
can arise:Stone chippingsStones trapped between the tires can be
thrown out while the vehicle is in motion
and injure other road users or damage their
vehicles (in particular the windshield).
Continued
nf_BA.book Page 425 Friday, January 25, 2008 3:53 PM

426 OperationCleaning and care of the vehicle
4
\1
Clean the vehicle, particularly the
lighting equipment, windows, exteri-
or mirrors, steps, entrances, grab
handles, wheels, tires, wheel hous-
ings and license plates. Observe the
notes in this section.
\1
Remove any trapped foreign objects,
e.g. stones.
Warning (Continued)
G
Risk of skiddingDirt and mud on the tires / road surface
reduce wheel grip. This is especially so if
the road surface is wet. The vehicle could
then start to skid.Risk of slippingDirt and mud on the steps and entrances
make the steps less safe. As a result you
could slip from the steps and injure yourself.For this reason, always clean your vehicle
carefully after driving off-road and on con-
struction sites before using public roads.
Continued
Warning (Continued)
G
If you use a high-pressure cleaner or auto-
matic car wash for this purpose, you must
follow the relevant safety instructions in
this section.
Warning
G
Dirty brake discs and brake pads / linings
can impair braking power (to the point of
total failure).You could thereby cause an accident.Check the brake system for operating
safety by testing the brakes before driving
the vehicle onto public roads.If braking power is impaired, stop the ve-
h i c l e a s s o o n a s i t i s s a f e t o d o s o a n d c o n -
sult an authorized Sprinter Dealer which
has the necessary specialist knowledge
and tools to carry out the work required.
Continued
nf_BA.book Page 426 Friday, January 25, 2008 3:53 PM

427 Operation
Cleaning and care of the vehicle
4
After driving in mud, sand, water or sim-
ilar conditions:\4
Check the brake system for operat-
ing safety.
\4
Clean the wheels, chassis and brake
system.
\4
Check them for damage and have
any damage repaired by an autho-
rized Sprinter Dealer if necessary.
Warning (Continued)
G
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at an authorized Sprinter
Dealer.
nf_BA.book Page 427 Friday, January 25, 2008 3:53 PM

430 Practical hintsWhat to do if ...
5
Audible warning signalsWarning
G
Always have maintenance work carried
out at an authorized Sprinter Dealer
Continued
Warning (Continued)
G
which has the necessary specialist knowl-
edge and tools to carry out the work re-
quired.
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose.
Continued
Warning (Continued)
G
I n p a r t i c u l a r , w o r k r e l e v a n t t o s a f e t y o r o n
safety-related systems must be carried
out at an authorized Sprinter Dealer.
There is a risk of an accident and injury if
this work is carried out incorrectly.
nf_BA.book Page 430 Friday, January 25, 2008 3:53 PM

431 Practical hints
What to do if ...
5
Problem
Possible cause / result
Suggested solutions
The anti-theft alarm system is suddenly trig-
gered.
You have opened the vehicle using the key
while the anti-theft alarm system was still
primed.
Key:
\1Press theΠbutton.
or
\1Insert the key into the ignition lock.
The anti-theft alarm system is deacti-
vated.
You hear a warning signal.
A message appears in the display.
\1Observe the instructions on
(\2page 484).
You are driving with the handbrake applied.
\1Release the handbrake (\2page 191).
You opened the driver’s door and forgot to
switch off the lights.
\1Turn the light switch to0.
Warning
G
You are not wearing your seat belt.
\1Fasten your seat belt .
nf_BA.book Page 431 Friday, January 25, 2008 3:53 PM