oil DODGE SPRINTER 2008 2.G Service Manual

510 Practical hintsDisplay messages
5
N
Engine oil level
Reduce
oil level
You have added too much engine oil. There
is a risk of damage to the engine or the cat-
alytic converter.
\1Check the engine oil level and have any ex-
cess oil siphoned off at the nearest refuel-
ing station (\2page 328).
The engine or the catalytic converter could be
damaged.
\1If the oil level is correct, have the malfunc-
tion rectified as soon as possible at an au-
thorized Sprinter Dealer.
Oil sensor
Visit
workshop
The measuring system is malfunctioning.
\1Have the measuring system checked at an
authorized Sprinter Dealer.
Engine oil level
Not when eng.
running
You are attempting to check the engine oil
level even though the engine is running.
\1Switch off the engine.
\1Check the engine oil level (\2page 322).
Display symbol
Display message
Possible cause / result
Possible solution
nf_BA.book Page 510 Friday, January 25, 2008 3:53 PM

552 Practical hintsFlat tire
5
Removing a wheel
\1
Unscrew the wheel bolts or wheel
nuts.
\1
For wheels with wheel nuts remove
the wheel nut cover.
\1
Remove the wheel.
Mounting the new wheel
\1
Clean the wheel and wheel hub con-
tact surfaces.
!
CAUTION
Do not place the wheel bolts or the
wheel nuts in sand or dirt. The bolt
and wheel hub threads could other-
wise be damaged.
Warning
G
Replace the wheel bolts and wheel nuts if
they are damaged or have become rusty.Never oil or grease wheel bolts or wheel
nuts.If a wheel hub thread is damaged, you
must not drive the vehicle. Consult an authorized Sprinter Dealer
which has the necessary specialist knowl-
edge and tools to carry out the work re-
quired.
Continued
Warning (Continued)
G
The manufacturer recommends that you
use an authorized Sprinter Dealer for this
purpose. In particular, work relevant to
safety or on safety-related systems must
be carried out at an authorized Sprinter
Dealer.For safety reasons, the manufacturer rec-
ommends that you only use wheel bolts
and wheel nuts which have been ap-
proved for Sprinter vehicles. Other wheel
bolts or wheel nuts could work loose.
nf_BA.book Page 552 Friday, January 25, 2008 3:53 PM

604 *Technical dataService products and capacities
6
\3 Service products and capacitiesService products are:\4
fuels
\4
lubricants (e.g. engine oils, transmis-
sion oils, hydraulic fluids, greases)
\4
antifreeze additives, coolant
\4
brake fluid
Service products are tested for suitabili-
ty in our assemblies. Approved service
products meet the highest quality stan-
dards and are listed in the
Mercedes-
Benz Specifications for Service Pro-
ducts
. For this reason, only use service
products that have been approved for
your vehicle. This is an important condi-
tion for warranty claims to be upheld. In-formation about approved service
products is available from all authorized
Sprinter Dealers.
You will find details about windshield
washer fluid in the “Operation” section
(
\2
page 333).
It is neither necessary nor permissible to
mix special additives with approved ser-
vice products (except for approved fuel
additives). Therefore, special additives
must not be mixed with fuels or lubri-
cants. The properties of the service
products could be adversely affected by
special additives and result in damage to
the assemblies.The vehicle operator is responsible at all
times for any use of special additives.
The use of special additives may result in
a limitation or an invalidation of your
warranty entitlement.
nf_BA.book Page 604 Friday, January 25, 2008 3:53 PM

606 *Technical dataService products and capacities
6
Warning (Continued)
G
Change out of clothing soiled with service
products immediately to avoid the risk of
fire and other injuries.Fire, naked flames and smoking are there-
fore prohibited when handling service
products due to their highly flammable
nature.Keep service products out of the reach of
children.You must observe the notes on danger
concerning the risk of poisoning, acid
burns and fire on the service product con-
tainers.
Environmental note
H
Dispose of service products in an environ-
mentally responsible manner.Engine oils!
CAUTION
Engine oils are labeled on the contai-
ner with various ACEA (Association
des Constructeurs Européens d’Au-
tomobiles) and/or API (American Pe-
troleum Institute) designations of
quality.
Chrysler Vans LLC recommends the
use of MB approved engine oils listed
in the Mercedes-Benz oil specificati-
on sheets MB 228.51, 229.3,
229.31, 229.5 and 229.51 which
also meet ACEA and/or API classifi-
cations listed on the following chart.
Only engine oils (including synthetic)
with any of the following classificati-
on grades, or combinations thereof,
are approved.
nf_BA.book Page 606 Friday, January 25, 2008 3:53 PM

607 *Technical data
Service products and capacities
6
Valid Mercedes-Benz oil specification
sheets:
Always refer to the following viscosity
chart for the proper viscosity grade
based on ambient temperature. Select
oil viscosity according to the lowest air
temperature expected before the next
oil change. This chart supersedes ALL previously
published viscosity charts.
For further information contact your au-
thorized Sprinter Dealer.Engine
MB sheet
Gasoline
M272
229.3, 229.31
229.5, 229.51
Diesel
OM642
228.51, 229.31,
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Castrol Syntec 5W-40
5W-40
229.3
Castrol Syntec 0W-30
European Formula
0W-30
229.5
Chevron Supreme
Synthetic Motor Oil
SAE 5W-40
5W-40
229.31
Fuchs Titan Cargo
Maxx SAE 10W-40
10W-
40
228.51
Fuchs Titan GT1 SAE
5W-30
5W-30
229.51
nf_BA.book Page 607 Friday, January 25, 2008 3:53 PM

608 *Technical dataService products and capacities
6
Fuchs Titan Supersyn
Longlife SAE 5W-30
5W-30
229.3
229.5
Havoline Ultra S 5W-
30
5W-30
229.31
Havoline Ultra S 5W-
40
5W-40
229.31
High Star
5W-30
229.3
Lotos Economic SL/
CF
5W-30
229.3
Lotos Syntetic Auto
Diesel CF
5W-40
229.3
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Lotos Syntetic SL/SJ/
CF/CD
5W-40
229.3
Mobil 1 0W-40
0W-40
229.3
229.5
Mobil 1 5W-50
5W-50
229.3
Mobil 1 ESP Formula
MB
5W-40
229.51
Mopar Part No
68001334AA
5W-30
229.51
Pennzoil Platinum
Synthetic Ultra
Diesel
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Pennzoil European
Formula Ultra
5W-30
229.5
Pennzoil Platinum Eu-
ropean Formula
5W-40
229.3
Pento High Perfor-
mance 5W-30 LA
5W-30
229.31
Pento High Perfor-
mance 5W-40
5W-40
229.3
Pento High Perfor-
mance 5W-40 LA
5W-40
229.31
Pentosin Diesel 10W-
40 LA
10W-
40
228.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
nf_BA.book Page 608 Friday, January 25, 2008 3:53 PM

609 *Technical data
Service products and capacities
6
Adding engine oil
Pentospeed
0W-30
229.3
Pentospeed 0W-30
VS*
0W-30
229.3
229.5
Q Diesel Plus
5W-30
229.51
Q European Engine
5W-40
229.3
Q European Engine Ul-
tra
5W-30
229.5
Quaker State Euro
Synthetic Ultra
Diesel
5W-30
229.51
Shell Helix Ultra AX
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
Shell Rimula Signia
10W-
40
228.51
Texaco Havoline Syn-
thetic Motor Oil SAE
5W-40
5W-40
229.31
Valvoline SynPower
MST
5W-30
229.51
The following oils have been
determined to meet the Chrysler Vans
LLC requirements as shown below:MB approved engine
oil
SAE
MB sheet
!
CAUTION
Diesel engine:
Never use any amount of engine oil
for the diesel engine that does not
conform to MB 228.51, 229.31
or 229.51 specifications. Otherwise
the diesel particle filter (DPF) could
be damaged.
If the above specified engine oils are
not available, you may also use engi-
ne oils conforming to MB 228.5,
229.3 and 229.5 specifications. You
should add no more than 1 qt (1 l) of
these engine oils, however.
nf_BA.book Page 609 Friday, January 25, 2008 3:53 PM

611 *Technical data
Service products and capacities
6
Fuel requirementsOnly use premium unleaded fuel:\4
The octane number (posted at the
pump) must be 91 min. It is an aver-
age of both the Research (R) octane
number and the Motor (M) octane
number: (R+M) / 2). This is also
known as the ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygen-
ates such as ethanol, IPA, IBA and TBA
can be used provided the ratio of any
one of these oxygenates to gasoline
does not exceed 10%; MTBE not to
exceed 15%.The ratio of methanol to gasoline must
not exceed 3% plus additional cosol-
vents.
Using mixtures of ethanol and methanol
is not allowed. Gasohol, which contains
10% ethanol and 90% unleaded gasoline,
can be used.
These blends must also meet all other
fuel requirements, such as resistance to
spark knock, boiling range, vapor pres-
sure, etc. Do not exceed an engine speed
of 3000 rpm if the vehicle is loaded
with a light load, such as two persons
and no cargo.
Do not exceed
2/3 of maximum ac-
celerator pedal position if the vehicle
is fully loaded or operating in moun-
tainous terrain.
nf_BA.book Page 611 Friday, January 25, 2008 3:53 PM

612 *Technical dataService products and capacities
6
Fuels for diesel engines Fuel requirements
Only use commercially available vehicu-
lar ULTRA-LOW SULFUR HIGHWAY DIE-
SEL FUEL (15 ppm SULFUR MAXIMUM).
Chrysler Vans LLC USA now approves
the use of B5 bio diesel (standard diesel
with a maximum of up to 5% Bio diesel
content) in the Sprinter vehicle CRD die-
sel engine.
Information on diesel quality can
normally be found on the fuel pump.
!
CAUTION
The following may lead to increased
wear or engine damage:
\4
Using gasoline that does not
meet the specifications men-
tioned above
\4
The use of non-approved special
additives
!
CAUTION
Marine diesel fuel, Bio diesel fuel,
heating oil or the like must not be
used.
Do not blend diesel fuel with marine
diesel fuel, Bio diesel fuel or heating
oil. The use of such non-approved fu-
els or blending diesel fuel may result
in malfunction or cause engine dam-
age. Damage or malfunctions result-
ing from poor fuel quality or from
blending specific fuel additives are
not covered by the Sprinter warranty.
nf_BA.book Page 612 Friday, January 25, 2008 3:53 PM

617 *Technical data
Service products and capacities
6
BrakesUse brake fluid approved for Chrysler Vans LLC standard MB 331.0 and/or Chrysler Vans LLC material standard MS-9971, brake
fluid certified to DOT 4 Plus standards, that also maintains a minimum dry boiling point (ERBP) of 500 °F (260 °C), a minimum wet
boiling point (WERBP) of 356 °F (180 °C) and a maximum viscosity of 1500 mm
2/s, conforming to FMVSS 116 and ISO 4925.
Brake fluid
2 years
2
Intac B026E Dry boiling point: 500°F
(260°C)
Wet boiling point: 356°F
(180°C)
MOPAR
® MS-9971 Part No. 04549625AC or
equivalent
331.0
9971
1 Chrysler Vans LLC Material Standard-No.
2 Over the course of a brake fluid’s service life, its boiling point falls due to the continuous absorption of moisture from the atmosphere. If the boiling point
of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard (e.g. when driving on long downhill stretches).
This has a detrimental effect on braking efficiency, which could increase the stopping distance. This increases the risk of an accident. Have the brake fluid
renewed every 2 years.
Service interval
Product name/product number
MB sheet
MS-No.
1
nf_BA.book Page 617 Friday, January 25, 2008 3:53 PM