warning DODGE SPRINTER 2008 2.G Service Manual

69 Safety
Driving safety systems
2
\3 Driving safety systemsIn this section, you will find information
about the following driving safety sys-
tems: \4
ABS (A
ntilock B
rake S
ystem)
\4
BAS (B
rake As
sist)
\4
ESP
® (E
lectronic S
tability P
rogram)
\4
ASR (acceleration skid control)
\4
EBV (electronic brake force distribu-
tion)
iThe maximum effect of ABS, BAS,
ESP
®, ASR and EBV can only be
achieved if you:
\4
always drive with the correct tire
pressures adjusted according to
the load (
\2
page 361)
\4
use winter tires (M+S tires) in
wintry conditions, with snow
chains if necessary
Warning
G
There is an increased risk of an accident if
you:\4
drive too fast, in particular when corner-
ing and on a wet or slippery road surface
\4drive too close to the vehicle in front
The driving safety systems described in
this section cannot reduce this risk and
are unable to override the laws of physics.
Always adapt your driving style to the pre-
vailing road and weather conditions, and
maintain an adequately safe distance
from other road users as well as any ob-
stacles on the road.
nf_BA.book Page 69 Friday, January 25, 2008 3:53 PM

70 SafetyDriving safety systems
2
ABS regulates the brake pressure in
such a way that the wheels do not lock
when you brake. This allows you to con-
tinue steering when braking.
ABS works from a speed of about 3 mph
(5 km/h) upwards, regardless of road
surface conditions.
ABS works on slippery surfaces, even
when you only brake gently.There is a malfunction if the
-
indica-
tor lamp is permanently lit while the en-
gine is running (
\2
page 466).
Despite this, the normal driving and
braking functions remain available.
iOnly use wheels with the recom-
mended tire sizes (
\2
page 623), oth-
erwise the driving safety systems will
not work correctly.
Antilock Brake System (ABS)
Warning
G
Do not depress the brake pedal several
times in quick succession (pumping). De-
press the brake firmly and evenly. Pump-
ing the brake pedal may reduce the
braking effect.
nf_BA.book Page 70 Friday, January 25, 2008 3:53 PM

71 Safety
Driving safety systems
2
BrakingIf ABS intervenes during braking, you will
feel the steering wheel vibrate gently
and the brake pedal pulsate.
If ABS intervenes: \1
Continue to depress the brake pedal
firmly until the braking situation is
over.
For full brake application:
\1
Depress the brake pedal with maxi-
mum force.Brake Assist operates in emergency
braking situations. If you depress the
brake pedal quickly, BAS automatically
increases the brake pressure, thereby
reducing the stopping distance.
\1
Keep the brake pedal firmly de-
pressed until the emergency braking
situation is over.
ABS prevents the wheels from lock-
ing.
When you release the brake pedal, the
brakes will work as normal again. BAS is
deactivated.
Warning
G
Always adapt your driving style to the pre-
vailing road and weather conditions, and
maintain an adequately safe distance
from other road users as well as any ob-
stacles on the road.
If ABS malfunctions, the wheels could
lock when you brake. This means that the
steerability of the vehicle is restricted
during braking and the stopping distance
may increase. If ABS is deactivated due to
a malfunction, BAS is also deactivated.
Brake Assist (BAS)
nf_BA.book Page 71 Friday, January 25, 2008 3:53 PM

72 SafetyDriving safety systems
2
Vehicles without steering wheel but-
tons:
There is a malfunction if the
k
indi-
cator lamp is permanently lit while the
engine is running (
\2
page 73).ESP
® monitors driving stability and de-
tects a tendency of the vehicle to under-
steer or oversteer (skidding) in good
time. ESP
® stabilizes the vehicle by
braking individual wheels, limiting the
engine power output, and greatly assists
y o u w h e n d r i v i n g o n w e t o r s l i p p e r y r o a d
surfaces. ESP
® also stabilizes the vehi-
cle when braking.
When ESP
® intervenes, the
v
warn-
ing lamp in the speedometer flashes.
Warning
G
If BAS malfunctions, the brake system is
still available with the full brake boosting
effect. In an emergency braking situation,
however, the braking force will not be ad-
ditionally boosted automatically and the
stopping distance may increase.
Electronic Stability Program
(ESP
®)
Warning
G
Proceed as follows if the v warning
lamp in the speedometer flashes:
\4Do not deactivate ASR under any cir-
cumstances.
\4Only depress the accelerator pedal as
far as necessary when pulling away.
\4Adapt your driving style to suit the
prevailing road and weather condi-
tions.
Otherwise, the vehicle could begin to
skid.
ESP
® cannot reduce the risk of an acci-
dent if you drive too fast. ESP
® is unable
to override the laws of physics.
nf_BA.book Page 72 Friday, January 25, 2008 3:53 PM

75 Safety
Driving safety systems
2
The ASR switch is located on the center
console.1To deactivate/activate ASR
\1To switch off:
press upper
section
1
of the switch.
The
v
warning lamp in the speed-
ometer lights up.
\1To switch on:
press upper
section
1
of the switch again.
The
v
warning lamp in the speed-
ometer goes out.
Warning
G
ESP
® remains active despite ASR having
been deactivated and carries out braking
interventions if this is necessary to im-
prove driving stability. Thev warning
lamp flashes.
If ASR is deactivated, there is an in-
creased risk that the brake system of your
vehicle could overheat and be damaged
when subjected to high loads for a long
period of time. A hot brake system also in-
creases the stopping distance.
For this reason, only deactivate ASR when
it is absolutely necessary.
N54.25-2916-31
nf_BA.book Page 75 Friday, January 25, 2008 3:53 PM

76 SafetyDriving safety systems
2
EBV monitors and regulates the brake
pressure at the rear wheels to improve
driving stability during braking.There is a malfunction if the
#
, k
,
-
and
6
indicator lamps are per-
manently lit while the engine is running
(
\2
page 462).
Electronic brake force distribution
(EBV)
Warning
G
If EBV malfunctions, the brake system is
still available with the full brake boosting
effect. However, the rear wheels may
lock, for example if the brakes are applied
with maximum force. You could then lose
control of the vehicle and cause an acci-
dent. Always adapt your driving style to
the change in handling characteristics.
Have the system checked at an autho-
rized Sprinter Dealer as soon as possible.
nf_BA.book Page 76 Friday, January 25, 2008 3:53 PM

85 Controls in detail
Opening and closing
3
Remote control with key
1 To unlock the sliding doors and
rear doors and opens or closes the elec-
tric sliding door*
2ΠUnlocking button
3‹ Locking button
4Release button for mechanical key
5Battery check lamp.
Warning
G
Do not leave children unsupervised in the
vehicle, even if they are secured by a child
restraint system.The children could:injure themselves on parts of the vehicleunlock the door on vehicles with an elec-
tric sliding door by pressing the central
locking button, and then open the doors
and thereby injure other persons
Continued
Warning (Continued)
G
get out of the vehicle and could either in-
jure themselves when doing so or they
could be injured by passing vehiclesbe severely or even fatally injured by pro-
longed exposure to intense heat
!Do not expose the key to high levels
of electromagnetic radiation, other-
wise this may interfere with the func-
tions of the key.
Protect the key from moisture to pre-
vent malfunctions.
nf_BA.book Page 85 Friday, January 25, 2008 3:53 PM

89 Controls in detail
Opening and closing
3
The alarm can be disabled in the follow-
ing ways:\1
Press the
Œ
button on the remote
control.
or
\1
Insert the key into the ignition lock.
Locking the vehicleOnly the driver's door and the rear doors
can be locked with the key.\1
For all other doors, press the locking
knob down.
\1
Close the doors.
The doors are locked.
\1
Insert the key all the way into the
rear door lock and turn it to the left.
The rear doors are locked.
\1
Insert the key all the way into the
driver’s door lock and turn it to the
right.
The driver’s door is locked.
iThe anti-theft alarm system (ATA) is
triggered when you open the vehicle
using the key.
Opening the driver’s or passen-
ger’s door from the insideWarning
G
Make sure nobody can become trapped
when you close or open the doors. Take
particular care, especially when children
are near the vehicle.Make sure there is sufficient clearance
and that the traffic area is clear when ope-
ning the doors.You could otherwise injure yourself and
others.
nf_BA.book Page 89 Friday, January 25, 2008 3:53 PM

90 Controls in detailOpening and closing
3
You can open the driver’s / passenger’s
door from the inside at any time, even if
it is locked. Open door only when condi-
tions are safe to do so.1Inside door handle
2Locking knob\1
Pull door handle
1
.
The door opens.
Sliding doorWarning
G
If the vehicle is parked on an incline, the
sliding door may move of its own accord if
it is open but not engaged. You or others
could be trapped.
Make sure that the sliding door is engaged
in the active retainer.
iThe sliding door is equipped with an
active retainer, which engages the
door at the end stop when opened.
Always make sure that the open slid-
ing door is correctly engaged in the
detent.
To open the sliding door, it is neces-
sary to pull the outside door handle
first, or press the button on the inside
handle, to release the sliding door
from its detent.
nf_BA.book Page 90 Friday, January 25, 2008 3:53 PM

98 Controls in detailOpening and closing
3
\1
Make sure that the doors are closed.
\1
Switch on the ignition (
\2
page 111).
\1
Press and hold the upper part of
relevant switch
1
or
2
on the cen-
ter console for 5 seconds.
The indicator lamp in the switch for
the sliding door concerned flashes
and a warning tone sounds three
times as confirmation.
Anti-trap protectionIf the sliding door is obstructed during
the opening procedure, it moves back in
the opposite direction slightly and stops.If the sliding door is obstructed during
the closing procedure, it opens fully
again.
Resetting the electric sliding door In the event of serious malfunctions or if
you disconnect the battery, you will
need to reset the sliding door.
Warning
G
The anti-trap protection function does not
eliminate the possibility of fingers or other
parts of the body being trapped against
the door frame and therefore does not
eliminate the risk of injury.
Always make sure that nobody is within
the operating range of the sliding door.
iThe anti-trap protection is pro-
grammed to be less sensitive when
you press and hold the switch on the
center console or the switch in the
doorway than when the door opens
of its own accord.
nf_BA.book Page 98 Friday, January 25, 2008 3:53 PM