remove seats DODGE SPRINTER 2008 2.G Owners Manual

124 Controls in detailSeats
3
\1
Remove key
1
from partition sliding
door.
\1
Fold seat cushion
2
down or up.
The seat cushion is held in the rele-
vant position.
Warning
G
When folding down the seat cushion, make
sure that nobody can become trapped.The Warning to the co-driver is increased
in the event of sudden steering move-
ments or an accident if there is a key in-
serted in the partition sliding door lock.Remove the key from the partition sliding
door before using the folding seat.
Rear bench seatWarning
G
All release levers on the legs of the rear
bench seat must be parallel to the vehicle
floor. A rear bench seat with 2 seats may
only be installed left-sided.You can obtain information from any au-
thorized Sprinter Dealer.
Continued
Warning (Continued)
G
The integrated seat belt can only offer the
degree of protection for which it is de-
signed if you install the specified rear
bench seats correctly. Therefore, you
must have the rear bench seat with four
seats installed only by a qualified special-
ist workshop, e.g., an authorized Sprinter
Dealer.Keep the seat bench mounting cups in the
vehicle floor free from dirt and foreign ob-
jects. This is the only way to guarantee
that the locking mechanisms will engage
securely.
Continued
nf_BA.book Page 124 Friday, January 25, 2008 3:53 PM