DODGE TOWN AND COUNTRY 2001 Service Manual

DODGE TOWN AND COUNTRY 2001 Service Manual TOWN AND COUNTRY 2001 DODGE DODGE https://www.carmanualsonline.info/img/12/56921/w960_56921-0.png DODGE TOWN AND COUNTRY 2001 Service Manual
Trending: transmission fluid, weight, change key battery, recommended oil, maintenance schedule, check transmission fluid, fuel consumption

Page 1361 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual INSTALLATION
CRANKSHAFT MAIN BEARINGS
(1) Install bearing halves in crankshaft supports.
(2) Lubricate crankshaft and main bearings with
clean engine oil.
(3) Install crankshaft supports on crankshaft

Page 1362 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual INSTALLATION
(1) Clean oil pan and sealing surfaces. Inspect oil
pan and engine block.
(2) Install oil pan, gasket, and retaining bolts (Fig.
69).
(3) Be sure power steering line brackets are in
prope

Page 1363 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual (4) Remove timing belt outer cover (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT / CHAIN
COVER(S) - REMOVAL).
(5) Remove timing belt (Refer to 9 - ENGINE/
VALVE TIMING/TIMING BELT/CHAIN AND
SPROCKETS

Page 1364 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual (7) Install timing belt (Refer to 9 - ENGINE/
VALVE TIMING/TIMING BELT/CHAIN AND
SPROCKETS - INSTALLATION) .
(8) Install timing belt outer cover (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT / CHAIN
C

Page 1365 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual INSTALLATION
(1) Apply MopartThread Sealant to the switch
threads.
(2) Install oil pressure switch in engine block.
(3) Connect oil pressure switch electrical connector
(Fig. 72).
(4) Lower vehicle.
(

Page 1366 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual REMOVAL
(1) Remove engine oil pan (Refer to 9 - ENGINE/
LUBRICATION/OIL PAN - REMOVAL).
(2) Using special tool VM.1054, remove oil pres-
sure relief valve from engine block (Fig. 75).
INSTALLATION
(1)

Page 1367 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual (7) Remove oil cooler retaining stud and remove oil
cooler from engine block (Fig. 78).
INSTALLATION
(1) Clean oil cooler and engine block sealing sur-
faces.
(2) Install oil cooler, retaining bolt, a

Page 1368 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual REMOVAL
(1) Raise vehicle on hoist.
(2) Remove oil filter cap drain plug and drain oil
from oil filter housing (Fig. 80).
(3) Remove oil filter cap with suitable oil filter
wrench (Fig. 80).
(4) Remov

Page 1369 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual (4) Install oil pan (Refer to 9 - ENGINE/LUBRI-
CATION/OIL PAN - INSTALLATION).
(5) Refill engine oil to proper level.
(6) Connect negative battery cable.
INTAKE MANIFOLD
DESCRIPTION
(Refer to 9 - ENG

Page 1370 of 2321

DODGE TOWN AND COUNTRY 2001  Service Manual (6) Remove plug in cylinder head cover/intake
manifold and insert VM.1053 to lock exhaust cam-
shaft in position (Fig. 84).
(7) Remove generator (Refer to 8 - ELECTRICAL/
CHARGING/GENERATOR - REMOVAL)
Trending: refrigerant type, traction control, oil change, seat memory, key fob, rear view mirror, odometer