trunk DODGE VIPER 2004 ZB / 2.G Owner's Manual

License Plate Light
Twist off sockets counter-clockwise and pull out bulbs.
Replace as required.
Headlight Aiming
The headlights on your new Viper were aimed at the
factory. The factory setting was made at a no load setting.
A great increase in weight will change the aiming and it
may be necessary to readjust the headlights if you
typically carry an excessive amount of weight in the
trunk or otherwise suspect misalignment.
MAINTAINING YOUR VEHICLE 193
7

Aiming Check
Each headlight assembly can be adjusted up and down
only. No left to right adjustment is necessary. To check,
proceed as follows:
1. Fill the fuel tank and park the vehicle on level ground.
A driveway is not normally level. If in doubt and you
have no way to check levelness, do not attempt to adjust
the headlights.
2. Mark the position of the headlights on a wall prior to
loading the vehicle. Load the trunk with the items you
normally carry. Have someone sit in the driver's seat who
is about the same weight as the person who drives the
vehicle.3. Push down on the front and rear of the vehicle several
times to make sure that the suspension has settled.
4. Then readjust the headlights to the original position.
NOTE:If any further adjustments are necessary, contact
your dealership.
194 MAINTAINING YOUR VEHICLE

Body
Component Fluid, Lubricant, or Genuine Part
Hinges:
Door, Trunk & Hood Springs and
LinksMopartSpray White Lube
Latches:
Door, Hood & Trunk MopartMulti-Purpose Lube NLGI Grade 2
Door Hinge Check Spring Lubriplate Mo-Lith No. 2 Grease or Petrocan Multiflex Moly EP 2 Grease
Seat Regulator & Track MopartMulti-Purpose Lube NLGI Grade 2
Window System Components MopartSpray White Lube
Lock Cylinders MopartSpray White Lube
Parking Brake Mechanism MopartSpray White Lube
198 MAINTAINING YOUR VEHICLE