FIAT 500 1964 1.G Workshop Manual

FIAT 500 1964 1.G Workshop Manual 500 1964 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4482/w960_4482-0.png FIAT 500 1964 1.G Workshop Manual
Trending: wiring, ignition, oil temperature, tow, change time, bulb, transmission

Page 1 of 128

FIAT 500 1964 1.G Workshop Manual FIAT 500 1957-73 
Workshop Manual 
Autobooks
Models Covered 
Fiat New 500 
Fiat 500D 
Fiat 500F 
Fiat 500L 
Fiat and Autobianchi Giardiniera

Page 2 of 128

FIAT 500 1964 1.G Workshop Manual CHAPTER 1
THE ENGINE
1 :1
1 :2
1 :3
1 :4
1 :5
1 :6
1 :7
1 :8
1:9
1 :10
1 :11Description
Engine removal (sedan—all versions)
Engine removal (station wagon)
Engine disassembly (sedan—all versions)
E

Page 3 of 128

FIAT 500 1964 1.G Workshop Manual FIG 1:1  Left side view of the power plant to suit
500  Sedan
10
FIG 1:2  Right side  rear  three-quarter view of the power plant for 500 Station  Wagon Mounted on the top of the cylinder  head  is th

Page 4 of 128

FIAT 500 1964 1.G Workshop Manual FIG 1 : 3  Engine section through crankshaft, pistons and  valves
F50011

Page 5 of 128

FIAT 500 1964 1.G Workshop Manual FIG 1 : 4  Engine cross-section through a cylinder
12

Page 6 of 128

FIAT 500 1964 1.G Workshop Manual The  interior of the  car can  be heated by the engine
warmed air being ducted into the front compartment and
controlled  by a  lever on the heating system tunnel.
Engine ignition is by a battery, ign

Page 7 of 128

FIAT 500 1964 1.G Workshop Manual LID CHECK A R M
FIG   1:6   Engine  compartment  lid  open LID LOCKING
HOOK
NUMBER PLATE
LAMP CABLE NUMBER PLATE LAMP
CABLE JUNCTION
CROSS  MEMBER  ARR.2O74.
FIG  1  :7   Engine  removal using  the  j

Page 8 of 128

FIAT 500 1964 1.G Workshop Manual 6 Release the ignition distributor support retaining nut
and lift away the distributor together w i t h  its support.
7  Remove all the mounting  bolts of the engine cooling
cowling and  lift away the

Page 9 of 128

FIAT 500 1964 1.G Workshop Manual STUD REMOVAL
PULLER  40010
FIG 1 :12  Removal of stud from crankcase by puller
A.40010
FIG  1  :13   Engine  without blower cowling and cylinder
head  cover.SPACER  A N D  CONNECTION
FOR ROCKER SHAFT

Page 10 of 128

FIAT 500 1964 1.G Workshop Manual 13  Remove all the bolts and washers joining the sump
casting to the crankcase making a special note of the
location of bolts of different lengths.
14 Mark the flywheel and crankshaft to ensure correc
Page:   1-10 11-20 21-30 31-40 41-50 ... 130 next >
Trending: Seat, seats, headlights, steering, wheel torque, engine oil, bulb