brake fluid FIAT 500 1967 1.G Workshop Manual

FIAT 500 1967 1.G Workshop Manual 500 1967 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4482/w960_4482-0.png FIAT 500 1967 1.G Workshop Manual

Page 72 of 128

FIAT 500 1967 1.G Workshop Manual CHAPTER 7
REAR SUSPENSION AND WHEELS
7:1
7:2
7:3
7:4Description
Removal of rear suspension assembly
Servicing swinging arms
Coil springs
7:1 Description
The  rear  wheels are independently sprung by m

Page 76 of 128

FIAT 500 1967 1.G Workshop Manual high bearing preload. To reset remove the wheel shaft
and fit a new resilient spacer. Repeat the rotation
torque test.
Swinging arm adjustment:
To adjust the swinging arm use Fiat fixture A.66064 as
s

Page 80 of 128

FIAT 500 1967 1.G Workshop Manual CHAPTER 8
FRONT SUSPENSION AND HUBS
8:1
8:2
8:3
8:4
8:5
8:6Description
Front suspension removal and dismantling
Leaf spring
Swinging arms
Kingpin housing
Steering knuckle and wheel hub
8:1 Description

Page 88 of 128

FIAT 500 1967 1.G Workshop Manual VERTICAL  LINE DB
S
EB
OIL  SUMPF
GF
FIG 8:16 Castor, camber angles
6 Insert the swinging arm pin onto the two studs that
are welded  to the  body sides so as to support the
front suspension and wheel

Page 96 of 128

FIAT 500 1967 1.G Workshop Manual CHAPTER 10
THE BRAKING SYSTEM
10:1 Description
10:2 Maintenance
10:3 Front brakes
10:4 Rear brakes
10:5 Master cylinder
10:6 Wheel cylinder10:7 Self-adjusting device
10:8 Removing a flexible hose
10:9

Page 97 of 128

FIAT 500 1967 1.G Workshop Manual FIG 10:1 Diagrammatic view of service and rear wheel parking brake system
Key to  Fig  10:1 1 Bleeder connections 2 Brake fluid reservoir 3 Service brake pedal 4 Hand lever, mechanical
parking brake o

Page 99 of 128

FIAT 500 1967 1.G Workshop Manual FIG 10:5 Section view of right side rear brake assembly
(500 Station Wagon)
FIG 10:6 Sectional view of a self-adjusting device for
automatic brake shoe-to-drum clearance take-up (500
Sedan)
Key  to

Page 100 of 128

FIAT 500 1967 1.G Workshop Manual FIG 10:7 Master cylinder section
Key to Fig 10:7 1 Plug and spring seat 2 Body 3 Front wheel brake line duct 4 Plunger return spring
5 Compensating hole 6 Plug 7 Supply duct 8 Fluid inlet hole  9 Plun

Page 101 of 128

FIAT 500 1967 1.G Workshop Manual FIG 10:9 Brake  fluid reservoir
Key  to  Fig  1 0 : 9 1  Reservoir  2  Strainer  3  Cap,  vented
PARKING  BRAKE  CONTROL  CABLE  AND  SHEATH
.CABLE  ADJUSTING NUTS
SHOE  OPERATING  LEVER
LEVER  RETURN

Page 102 of 128

FIAT 500 1967 1.G Workshop Manual 10:9 Brake fluid reservoir
The reservoir is located in the front compartment to the
side of the fuel tank as shown  in FIG 10:9. Should it be
necessary to detach the fluid outlet line from  the reserv
Page:   1-10 11-20 next >