phone FIAT 500 ABARTH 2012 2.G Blue And Me User Guide

Button Short press function (less than 1 second) Long press function
(more than 1 second)
/MAIN•LaunchBLUE&ME™Main Menu
•Dial the number displayed on the display that was accessed
haptically from the phonebook or the recent calls list
•Accept an incoming phone call
•Switch between two ongoing phone conversations (call
waiting)
•Dial the name/number on the display that was selected/
entered by voice recognition–
/ESC•Cancel voice recognition
•Cancel a voice announcement
•Interrupt message reading
•ExitBLUE&ME™Main Menu
•Exit the sub-menu and return to the previous menu option
•Exit current menu option without storing settings
•Turn the microphone on/off during a phone conversation
•Mute the ring tone of an incoming call
•Media player Pause on/off–
16 BLUE&ME™ User’s Manual

Button Short press function (less than 1 second) Long press function
(more than 1 second)
VOICE RECOG-
NITION (VR)•Activate voice recognition
•Interrupt voice announcement to provide a new voice com-
mand•Repeat the last utter-
ance in a voice inter-
action
PHONE HANG UP
•Reject an incoming call and end a phone call in progress
•End an active call and switch to a call waiting (on hold)–
PRESET UP/OK (left
side back of steering
wheel)•Confirm manually selected menu option
•Switch phone conversation from the hands-free phone to
your mobile phone and vice versa
•Select displayed message–
SCAN UP
/SCAN
DOWN
(left side
back of steering wheel•ScrollBLUE&ME™menu items
•Scroll though media player tracks
•Scroll inbox messages–
NOTE:
•For both operating modes of Voice Command steering
wheel buttons (short or long press), the function
chosen will be activated when you release the button.
•When connecting toBLUE&ME™Hands-Free Com-
munication for the first time, your phone’s phonebook
will automatically be downloaded. If this operation is
not allowed immediately after pairing for the first
time, theBLUE&ME™system will prompt you for the
1
BLUE&ME™ User’s Manual 17

phonebook each time you connect to the system. For
phones containing a SIM card, the phonebook on the
SIM card will be downloaded if it is allowed. See your
phone’s Operating Manual for further details.
BLUE&ME™ HANDS-FREE COMMUNICATION
PACKAGE QUICK REFERENCE GUIDE
To quickly get started with using theBLUE&ME™
Hands-Free Communication Package with voice recogni-
tion andBluetoothwireless technology:
•Prepare your mobile phone phonebook
•Turn the ignition key to ON
•Try out the voice commands
•Pair your mobile phone
•Make a phone call
Instructions for each of the above functions are given in
the following paragraphs.
Prepare Your Mobile Phone Phonebook
Before creating a pairing relationship between your mo-
bile phone andBLUE&ME™Hands-Free Communica-
tion, you should make sure that you have contact entries
in your mobile phone phonebook so that you can use
them with the hands-free phone.
If your phonebook is empty, quickly create several new
entries for frequently dialed phone numbers. For further
details, consult your mobile phone owner ’s manual.
To properly enter contacts in your mobile phone phone-
book, refer to SETTING FUNCTIONS - PAIRING YOUR
MOBILE PHONE.
Important Notes
•
The phonebook copied toBLUE&ME™can only be
used when the corresponding mobile phone is paired
and connected.
18 BLUE&ME™ User’s Manual

•Once a mobile phone is paired to theBLUE&ME™
system, the phone will automatically connect
/disconnect to theBLUE&ME™system whenever the
ignition is turned to ON/OFF. All of theBLUE&ME™
features are fully functional when the phone is con-
nected toBLUE&ME™.
NOTE:Some mobile phones may require you to accept
theBLUE&ME™connection, depending on the mobile
phone settings.
•Entries stored in SIM card or mobile phone memory
can be transferred toBLUE&ME™with different
procedures, according to your mobile phone model.
Try Out the Voice Commands
At each stage of your dialogue with the system, you can
always use the voice command“Help”,to get detailed
indications about the voice commands available.To try out the“Help”function, proceed as follows:
•Press thesteering wheel button.
•AfterBLUE&ME™says “Say a command” and plays
a tone indicating that voice recognition is active, say
“Help”.BLUE&ME™will speak the list of voice
commands available.
•After the general help message is finished, say“Set-
tings”and then“Help”.BLUE&ME™will speak the
list of voice commands available for the Settings
menu.
•You can then say or pronounce one of the available
commands and proceed with the dialogue as you like.
•If you need additional help, press thesteering
wheel button and say“Help”again.
1
BLUE&ME™ User’s Manual 19

Pair Your Mobile Phone
CAUTION!
BLUE&ME™ Hands-Free Communication only al-
lows this operation to be performed when the car is
stopped.
To pair your mobile phone, proceed as follows:
•Press thesteering wheel button and say“Set-
tings”then, at the end of theBLUE&ME™message
say“Pairing”.
•The system will show the phone pairing PIN number
on the multifunction display. For the next two steps,
consult your mobile phone owner ’s manual about
Bluetoothpairing procedures for your phone.
•On your mobile phone, search for devices equipped
withBluetoothwireless technology (the setting on
your mobile phone might be called Discover or New
Device). In this list you will findBLUE&ME™(name
identifying theBLUE&ME™system on your car);
select it.
•When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and at the end the
display will show a confirmation message, the ID of
the paired mobile phone.
It is essential to wait until you see this confirmation
message on the display. Pressing the
/MAINbutton
on the steering wheel or
/ESCbefore the message is
displayed may cancel the pairing process. If the pairing
process fails, an error message will be displayed: in this
event repeat the pairing procedure.
20 BLUE&ME™ User’s Manual

•After the first pairing,BLUE&ME™will say“Wel-
come”immediately after connecting. This message
will no longer be heard when your phone automati-
cally connects to theBLUE&ME™system on future
ignition cycles.
•BLUE&ME™will ask if you would like to copy your
paired phone phonebook toBLUE&ME™. It is recom-
mended to copy it. To start copying the phonebook say
“Yes”,otherwise say“No”.
Making a Phone Call
Assume that “John Smith” is one of the contacts stored in
your phonebook.
To call John Smith, proceed as follows:
•Press thebutton and say“Call John Smith”.
•If the name is recognized, the system will display the
recognized contact’s information on the display
screen.If there is just one phone number for John Smith in your
phonebook, the system will ask if you would like to call
John Smith. To start the call say“Yes”,otherwise say
“No”.
If John Smith has several phone numbers, the system will
ask which phone number you would like to call (e.g.,
“Call John Smith (at) Work or (at) Home?”). Answer
with the type of required phone number (e.g.,“(at)
Home”).
If John Smith has several phone numbers but the “loca-
tion” (e.g., the type of phone number like work, home,
etc.) is missing, the system will display the selected
contact and a list of related phone numbers on the
instrument cluster display. The hands-free communica-
tion system will ask if you would like to call the phone
number displayed. To respond with “yes”, say“Yes”,
otherwise say“No”. You can also scroll through the
phone number list manually by pressing the buttons on
1
BLUE&ME™ User’s Manual 21

the back of the steering wheel until you find the required
number. Then, press thePRESET UP/OKbutton on the
rear of the steering wheel to start the call.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
NOTE:
If you encounter difficulties with any of the voice
recognition operations, refer to HANDS-FREE COMMU-
NICATION PACKAGE - TROUBLESHOOTING.
MESSAGE READER QUICK REFERENCE GUIDE
If yourBluetoothwireless technology enabled mobile
phone supports the message reader function, at the
arrival of a new SMS text,BLUE&ME™plays a tone and
it will ask if you would like to read it.
•Say“Yes”or press the/MAINbutton on the
steering wheel or thePRESET UP/OKbutton on the
rear of the steering wheel to read the last message
received.
•Say“No”or press the/ESCbutton on the steering
wheel; the system will store the message so you can
read it later.
For further details on the message reader SMS, refer to
the section “MESSAGE READER FUNCTIONS”.
NOTE:If you encounter difficulties with any of the
message reader settings, refer to MESSAGE READER –
TROUBLESHOOTING.
MEDIA PLAYER QUICK REFERENCE GUIDE
To start playing the digital audio files stored on your USB
stick or iPod, proceed as follows:
•Copy tracks to your USB stick(BLUE&ME™
recognizes.wma,.mp3.wav and aac formats for audio
files and.wpl and.m3u formats for playlists).
•USB sticks without USB wire: just connect the USB
stick (directly or by an extension lead) to the USB port
in the glove box of the car.
22 BLUE&ME™ User’s Manual

HOW TO USE BLUE&ME™ HANDS-FREE
COMMUNICATION
Steering Wheel Controls
Buttons on the steering wheel are used to perform
functions on the hands-free communication package,
activating voice recognition, using the media player
functions, or selecting aBLUE&ME™menu option.
Certain buttons have multiple functions which depend
on the current state of the system.
The function chosen in response to a key press is in some
cases controlled by the duration of the key press (short or
long).
NOTE:
•For further information refer to DISPLAY AND BUT-
TONS ON THE STEERING WHEEL.
•Instructions concerning manual controls are identified
in the text by the appropriate symbol.
Voice Commands
Voice commands can be said by the driver, who does not
need to change his/her normal driving position to be
heard by the system, since the microphone is properly
located and oriented to this purpose.
Voice commands, which are words recognized by the
system, are identified as “keywords”.
The hands-free communication system recognizes and
responds to a preset list of voice commands. The list of
available voice commands depends on the keyword
menu level that you are currently on. The current list is
always available by pressing the
steering wheel
button and saying“Help”or, saying“Help”when
BLUE&ME™is waiting for a voice command.
BLUE&ME™also recognizes personalized versions of
voice commands, like the name of a contact in your
phonebook.
24 BLUE&ME™ User’s Manual

/ESCto cancel the entire VR session or press the
steering wheel button, wait for the beep and say
“Cancel”.
A voice interaction is a two-way communication/spoken
exchange between system and user. To initiate a voice
interaction, press the
steering wheel button and
issue a command. To interrupt a voice announcement
fromBLUE&ME™and say your reply before listening to
the entire voice announcement, press the
steering
wheel button and speak your command after the prompt.
To stop an ongoing interaction, press the
/ESCbut-
ton. You will hear a tone indicating when voice recogni-
tion is deactivated.
The hands-free communication Help option can speak
the list of commands available to you at any time,
depending on the keyword level that you are currently
on. To use the Help system, say“Help”. Listen to the listof currently available commands and decide on which
command you’d like to issue to the system.
Adjust the volume of phone calls to a level that is
comfortable and safe while the car is in motion. To adjust
the default volume ofBLUE&ME™, refer to EXTERNAL
AUDIO VOL function in the Owner’s Manual on the
DVD. To temporarily adjust the volume of the current
phone call, press+or–or adjust the position of the radio
knob. After the phone call is disconnected, the volume
will revert back to the original level.
You can pressVo l +orVo l –buttons on the rear of the
steering wheel also to adjust the volume of the current
BLUE&ME™voice announcement.
Please remember that to interrupt a voice announcement,
you can always press the
steering wheel button at
any time during a voice interaction and give a new voice
command.
26 BLUE&ME™ User’s Manual

•Say words clearly, in your natural voice at a moderate
pace, without stops.
•If possible, try to minimize background noise in the
car.
•Ask the other passengers to keep silent while you are
speaking voice commands to prevent misunderstand-
ing since the system could recognize other words (in
addition to or different from your voice command) if
several people are speaking.
•If your car has a convertible top, close it before using
voice recognition.
NOTE:
•In countries where theBLUE&ME™version in native
language is not available, voice recognition of the
different commands and phonebook contacts could be
difficult. You are therefore recommended to adopt a
pronunciation/accent meeting the language available
onBLUE&ME™.
•The display language can be changed from the instru-
ment cluster menu, but to change the voice recognition
(VR) language and announcements, contact your FIAT
Dealership or consult the dedicated site at www.fia-
tusa.com website.
Display
The differentBLUE&ME™Main Menu options are dis-
played on the instrument panel multifunction display.
The display shows the following information:
•Status information for theBluetoothwireless tech-
nology enabled mobile phone (e.g., on a call).
•Indicates thatBLUE&ME™is currently con-
nected with aBluetoothwireless technology enabled
mobile phone.
28 BLUE&ME™ User’s Manual