phone FIAT 500 ABARTH 2012 2.G Blue And Me Service Manual

start copying the phonebook, press thePRESET UP/OK
button; otherwise press the
/ESCbutton. You can
download your phonebook at a later time using the
menu optionSETTINGS, USER DATA, or PHONE-
BOOK.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone then say“Pairing”.
The system shows the mobile phone pairing PIN on the
instrument panel display and repeats it.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select “
BLUE&ME™” (item that identifies the hands-free com-
munication package in your car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAINor
/ESCbuttons at this time may cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
The first time a phone connect to the system, the system
will say“Welcome”immediately after connecting. This
message will no longer be heard the next time the phone
connects to the system.
1
BLUE&ME™ User’s Manual 59

The system will ask if you would like to copy your
phone’s phonebook. Copying is recommended. To start
copying the phonebook, say“Yes”;otherwise say“No”.
For certain mobile phones the phonebook is not copied
automatically, in this case you must send the contacts in
your mobile phone’s phonebook to theBLUE&ME™
hands-free communication system using your mobile
phone keypad.
Practical hints
To improve both the voice recognition of your phone-
book entries andBLUE&ME™pronunciation accuracy
when repeating the entries, please try to enter contact
entries and memorize them using the following criteria:
•Avoid abbreviations.
•Write foreign names according to the way in which
they are pronounced according to the rules of the
BLUE&ME™language set on your car. For example,enter “Tanja” as “Tanya”, to improve recognition ac-
curacy and also to obtain the correct pronunciation by
the system.
•When adding or editing contact entries, insert the
appropriate accent marks when the name requires
these marks to be properly pronounced and recog-
nized by the system. For example enter “Nicolo Re-
bora” as “Nicolò Rébora” to obtain the correct pronun-
ciation.
•When adding or editing contact entries, bear in mind
that certain capital letters may be read as Roman
numerals (e.g., V may be read as fifth).
•When calling contacts by voice, do not include the
middle names or middle initials of your contacts.
60 BLUE&ME™ User’s Manual

NOTE:
•You only need to pair your mobile phone a single time.
•You can pair up to five mobile phones, but only one
phone can be used at a time. To use one of the other
paired phones, the currently connected phone needs to
be powered off or it’sBluetoothsetting must be
turned off.BLUE&ME™will then search the paired
phone list looking for a phone to connect to.
•On your paired mobile phone, theBluetoothsetting
must be turned on in order to connect your mobile
phone withBLUE&ME™Hands-Free Communica-
tion.
•Before transferring your mobile phone contacts to the
hands-free communication system, make sure that
each contacts first and last name is unique and dis-
tinctly recognizable to improve the voice recognition
results.
•Depending on the size of your phonebook,
BLUE&ME™may take some time to download or
check for updates. So, if you try to immediately make
a phone call after getting into the vehicle, the
BLUE&ME™system may tell you to wait.
•The system will download only valid contact entries.
A valid contact entry must include both a name and at
least one phone number.
•If you would like to re-pair your mobile phone, delete
the old pairing relationship first. During this operation
all paired phones and their associated phonebook
information will be deleted. To delete a paired phone
from the system, from theUSER DATAmenu, select
DELETE USERS. On your mobile phone, delete
BLUE&ME™from the list ofBluetoothmobile
phones following the specific instructions for your
mobile phone (refer to your mobile phone owner ’s
manual).
1
BLUE&ME™ User’s Manual 61

•If you download a phonebook with a contacts list
including more than 1000 contacts, the system may
operate slower than expected and voice recognition of
the names in your phonebook may be degraded.
•If the pairing list is accidentally deleted, the pairing
procedure will be repeated.
Managing User Data
You can manage the user data used byBLUE&ME™by
entering theUSER DATAmenu. The phonebook can be
deleted, all paired phones and their associated phone-
book data can be deleted, or all data can be deleted. If all
data is deleted then the memory inBLUE&ME™will be
restored to it’s initial empty condition. If the phonebook
had not been previously downloads during the phone’s
initial pairing then you can choose to download it now or
you can copy individual contacts from you phone toBLUE&ME™. Not all phones support phonebook down-
loading or copying individual contacts. Consult www-
.fiatusa.com for further information on the list of com-
patible mobile phones.
To open theUSER DATAmenu using manual interac-
tion, proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
Select theUSER DATAand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”.Wait until
after the tone then say“User data”.
In theUSER DATAmenu you can perform the following
functions described below.
62 BLUE&ME™ User’s Manual

Delete user data
In theUSER DATAmenu you can delete the pairing list.
After you delete the pairing list, you cannot use an
unpaired phone with the hands-free communication sys-
tem, or its phonebook, until you re-pair it. Always
remember that this operation deletes all the devices from
the pairing list.
To delete user data using manual interaction, proceed as
follows:
SelectDELETE USERSand then press thePRESET
UP/OKbutton.
The system will display the messageDELETE USERS?.
To confirm, press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
, say“Settings”,wait for the tone then say
“Delete users”.The system will ask“Delete all paired users?”.To
confirm, say“Yes”.
NOTE:
•Always remember that if a mobile phone is paired
with the system while another phone is connected, the
connection with the current phone is ended to estab-
lish a connection with the new phone.
•It is not possible to delete the pairing relationship with
a single phone on the pairing list unless it is the only
phone present on the pairing list.
•If all paired users are deleted from the pairing list then
each phone must be re-paired before it can be used
withBLUE&ME™again.
Delete the phonebook
In theUSER DATAmenu you can delete the phonebook
data that was downloaded to the system.
1
BLUE&ME™ User’s Manual 63

To delete the phonebook using manual interaction, pro-
ceed as follows:
SelectDEL. PHONEBOOKand then press thePRESET
UP/OKbutton.
The system will display the questionDEL. PHONE-
BOOK?. To confirm, press thePRESET UP/OKbutton
Or, using voice interaction:
Press the
button and say“Settings”wait for the
tone and then say“Delete phonebook”.
The system will ask“Delete copy of phonebook from
the system?”To confirm, say“Yes”.
Download the phonebook
If you chose not to download the phonebook during the
phone pairing procedure, or if you recently deleted the
current phonebook, theUSER DATAoption will be
available in thePHONEBOOKmenu.To download a paired mobile phone phonebook using
manual interaction, proceed as follows:
SelectPHONEBOOKand then press thePRESET
UP/OKbutton.
Or, using voice interaction
Press the
button and say“Settings”,wait for the
tone and then say“Download phonebook”.
Add contacts
To copy contacts from your mobile phone to the hands-
free communication system using manual interaction,
proceed as follows:
SelectADD CONTACTSand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone and say“Add Contacts”.
64 BLUE&ME™ User’s Manual

Then follow the instructions given on your mobile phone
owner ’s manual for transferring contacts.
Reset user data
To reset all user data to the default values using manual
interaction, proceed as follows:
Select DELETE ALL and then press thePRESET UP/OK
button.
The system will display the question“Delete all?”.To
confirm, press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”, wait for the
tone and then say“Reset All”.
The system will ask“Delete all data saved by users from
the system?”. To confirm, say“Yes”.
Advanced Options
To navigate to the ADV. OPTIONS menu using manual
interaction, proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
select SETTINGS by pressing thePRESET UP/OKbut-
ton.
Select ADV. OPTIONS and then press thePRESET
UP/OKbutton.
Within the ADV. OPTIONS menu you can access the
device ID.
NOTE:This code is an 8-digit number (device ID) which
uniquely identifies theBLUE&ME™system installed on
your car and cannot be changed.
1
BLUE&ME™ User’s Manual 65

Repeat
Use the Repeat option to repeat a track.
To activate the Repeat option using manual interaction,
proceed as follows:
Open the Main Menu, select MEDIA PLAYER, SET-
TINGS, REPEAT and then press thePRESET UP/OK
button.
To activate the Repeat option, select REPEAT ON and
press thePRESET UP/OKbutton. To deactivate it, select
REPEAT OFF and press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
and say“Repeat on”or“Repeat off”.
NOTE:With the Repeat option on, the previous and
next commands will play the previous or next track and
the new track will be repeated.
Exit the settings menu
At the end of any of the operations described above, you
can exit the SETTINGS menu as described below or the
message will disappear from the display in less than
10 seconds.
To exit the SETTINGS menu using manual interaction:
Select EXIT and then press thePRESET UP/OKbutton.
BLUE&ME™ HANDS-FREE COMMUNICATION
SUPPORTED MOBILE PHONES
BLUE&ME™Hands-Free Communication supports
your personal devices viaBluetoothwireless technol-
ogy and USB.
To get updated information about devices supported by
BLUE&ME™, contact a FIAT Dealership or consult the
dedicated website at www.fiatusa.com.
68 BLUE&ME™ User’s Manual

Mobile Phones With BluetoothWireless
Technology
BLUE&ME™Hands-Free Communication supports
most mobile phones withBluetooth1.1 and Hands-Free
1.5 profile support (refer to theBluetoothwireless
connection specifications given in your mobile phone
owner ’s manual).
Due to the different software versions supported on
mobile phones, certain functions (e.g., answering a sec-
ond incoming phone call, transferring phone a phone call
from hands-free communication system to mobile phone
and vice versa, etc.) may not be supported as described in
this manual. In any case, phone conversation using the
hands-free communication package will not be impaired.
“Pull” phones
“Pull” phone means that your mobile phone supports
automatic phonebook download withBluetoothwire-
less technology, your whole phonebook will be automati-
cally downloaded toBLUE&ME™during the initial
phone pairing procedure and updated every time your
phone connects toBLUE&ME™.
To consult the list of mobile phones and functions
supported, consult the dedicated website at www.fia-
tusa.com or Customer Services on 888-CIAO-FIAT
(888-242-6342).
“Push” phones (phonebook not automatically
downloaded)
“Push” phone means that your mobile phone supports
single contact download withBluetoothwireless tech-
nology. After the pairing process you will need to go to
the USER DATA, ADD CONTACTS menu to send phone-
book contacts from your mobile phone toBLUE&ME™.
1
BLUE&ME™ User’s Manual 69

Mobile phones with message reader (not all
mobile phones support reading incoming SMS
messages)
If your mobile phone can send messages through the
Bluetoothwireless technology, it is possible to read
incoming messages using theBLUE&ME™Hands-Free
Communication Package, to store them in the dedicated
inbox or to delete them.
Supported USB Memory Devices
USB Memory Devices
The media player supports most USB memory devices.
1.0, 1.1 or 2.0.
NOTE:It is not possible to use USB devices equipped
with a “password” function.
Supported digital audio files
The media player supports audio files with the following
formats:
Extension Audio Coding
.wma Windows Media Audio Decode
(Format Tag: WMA2 = 353,
WMA1=352) Decodes all CBR pro-
files from 5kbps to 192kbps, 8kHz
to 48kHz, mono and stereo De-
codes all v9 CBR profiles, from
5kbps to 320kbps, 8kHz to 48kHz,
mono and stereo Decodes all qual-
ity based, bit rate based and peak
constrained VBR profiles Supports
WMA v1 and WMA v2 bit streams
70 BLUE&ME™ User’s Manual