CD changer FIAT BARCHETTA 2001 1.G Radio Tape Player And External CD Manual

9Cyan GialloMagenta Nero603.47.453
9
KEY
[K]: In radio mode
[J]: In tape player mode
[I]: In CD mode
NOTE:
Various functions and settings can be made by press-
ing the up/down [3] and left/right [18] buttons. This
operation is called the “Alpha-Touch Controller”
function. 17.Band selection button, manual tuning
(BAND) [K]
Change tape side button (PROG) [J]
CD Changer magazine button (MAG) [I]
18.Bass, balance, manual/automatic tuning, dis-
tant/locale search, tape fast forward/reverse,
next/last tape/CD track, CD fast forward/re-
verse buttons (left/right) (Gand H) [J],
[K], [I]

21Cyan GialloMagenta Nero603.47.453
21
CD PLAYER
The sound system can be connected to a compati-
ble CD player (CD Changer).
Loading the CD magazine
Make sure that label A-fig. 3is the right way up,
otherwise the CD player will not work.
The magazine can hold up to six discs.
Fitting the disc magazine in the player
Open flap fig. 2. This can be caused by:
– low level recordings (weak sounds and not per-
fect recording)
– tapes containing conversations
– tapes with blank sections lasting less than 12 sec-
onds
– tapes with long periods of silence in the record-
ings
– tapes without blank sections (e.g. live record-
ings)
– tapes with a lot of noise in the blank sections

27Cyan GialloMagenta Nero603.47.453
27
Error displayProcedure
Error in the CD Changer mechanism (the disc cannot be changed, eject-
ed, etc.)
➞The CD Changer mechanism is probably damaged. Contact your local
dealer.
The pick-up is out of focus during playback due to scratches on the disc,
etc.
The CD contents cannot be read, probably because the disc has been in-
serted upside down.
The cassette is jammed during insertion or ejection.
➞Remove the cause jamming the cassette.
If you cannot solve the problem, turn the sound system off and contact aFiat Dealership.
This unit is equipped with a set of self-test functions to protect the system. The user will be informed of errors by means of the
following messages. Solve the problem as shown in the following procedures.